Antenna radiation pattern rotation
14 次查看(过去 30 天)
显示 更早的评论
Hello everyone,
I'm having some problems with a rotation of the antenna field. Here my antenna pattern now, after a decomposition of the theta and phi fields in x,y,z-ones:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/539496/image.jpeg)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/539501/image.jpeg)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/539506/image.jpeg)
and I'd like to rotate the main lobe along the x-axis. Do you have any idea to how I shoud do it? (without the phased array toolboox - so the rotpad function- because I do not have the toolboox).
I tried applying the matrix rotation on the 3(x,y,z)-components but it just gives me a kind of "change of name". Here the results:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/539511/image.jpeg)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/539516/image.jpeg)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/539521/image.jpeg)
But as you can see the main lobe is now in the z-component (right for my purpose) but not along the x-axis.
Thank you a lot in advance.
6 个评论
David Goodmanson
2021-3-8
I am still not quite getting it. You have a lot of data so there must be some arrays of length a lot greater than 2.
Bjorn Gustavsson
2021-3-8
Marina, to me it sounds like you need to sketch this up from the beginning. Simply draw your two dipoles with their respective orientation and figure out what combinations of components you will detect. Further, I'd guess that you definitely dont need to "rotate the antenna-pattern", rather you need to get some combination of the H-field components - depending on your receiver orientation and position.
采纳的回答
David Goodmanson
2021-3-8
编辑:David Goodmanson
2021-3-8
Hi Marina,
Since you are using surf, I am going to assume that you have three matrices x,y,z, each of size m x n, appropriate to feed into surf(x,y,z). Maybe this will help.
% simple example
thx = linspace(0,pi,40);
phix = linspace(0,2*pi,60);
[th phi] = meshgrid(thx,phix);
r = sin(th).*cos(th).*sin(phi);
x = r.*sin(th).*cos(phi);
y = r.*sin(th).*sin(phi);
z = r.*cos(th);
fig(1)
surf(x,y,z)
Rotate this through some arbitrary angles:
% rotate this through some arbitrary angles
xyz = [x(:) y(:) z(:)];
xyznew = xyz*Rxd(100)*Ryd(200)*Rzd(-300);
xnew = reshape(xyznew(:,1),size(x));
ynew = reshape(xyznew(:,2),size(x));
znew = reshape(xyznew(:,3),size(x));
surf(xnew,ynew,znew)
function M = Rxd(th)
% x rotation matrix
% angle is in DEGREES
% ccw rotation looking down at rotation axis up out of page
c = cosd(th);
s = sind(th);
M = [ 1 0 0;
0 c -s;
0 s c];
end
function M = Ryd(th)
% y rotation matrix
% angle is in DEGREES
% ccw rotation looking down at rotation axis up out of page
c = cosd(th);
s = sind(th);
M = [ c 0 s;
0 1 0;
-s 0 c];
end
function M = Rzd(th)
% z rotation matrix
% angle is in DEGREES
% ccw rotation looking down at rotation axis up out of page
c = cosd(th);
s = sind(th);
M = [ c -s 0;
s c 0;
0 0 1];
end
0 个评论
更多回答(0 个)
另请参阅
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!