Asynchronous machine incorrect speed plot

4 次查看（过去 30 天）
Julio Incerti de Figueiredo
回答： Graham Dudgeon 2021-4-27
I have made a simple model for an Induction Motor. I've used its constants (stator's and rotor's impedance and resistance etc) that I've found at its datasheet. I was expecting to find its Nominal Speed (around 4400 rpm with 2 pairs of poles at 150Hz), but instead I find this strange plot. At the beginning, it seems like the speed is indeed around 4400, but it starts decreasing until it hits 0 and I cant understand why.
During the simulation shown at the photo I was using Rotor Type: Squirrel Cage, Reference Frame: Rotor and Mechanical Power (at "Load Flow") = 6000W
Steps that didn't solve the problem:
-Change the voltage between 51V, 51*sqrt(2)V and 51*sqrt(2)/sqrt(3)V
-Change the slip between 0.0267, 0 and 1
-Change the reference frame between Rotor, Stationary and Synchronous
-Add an input at Tm
-Change the solver information between ode15, ode23 and ode45
  1 个评论
Mike Sasena
Mike Sasena 2021-4-27
Hi Julio,
It might help to update the tags in your question. The motor model you're showing is not part of Powertrain Blockset's library, but appears to be a Simscape model instead (this one?). I've added the Simscape Electrical tag so that team can better find your question and provide some guidance.

请先登录，再进行评论。

请先登录，再回答此问题。

回答（1 个）

Graham Dudgeon
Graham Dudgeon 2021-4-27
Hi Julio,
The speed reduces as you have a friction factor of 0.05479 on your motor shaft that is not compensated for by an input torque. Connect a constant block to 'Tm' and set the value to -150*2*pi*(1-0.0267)*0.05479/2.

类别

在 Help Center 和 File Exchange 中查找有关 Simscape Electrical 的更多信息

标签

产品


版本

R2019a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by