Determining time elapsed in between two successive pulses of a signal

8 次查看(过去 30 天)
I have a voltage signal from a rotary encoder which gives 1 pulse (4.5v) per revolution. I need to calculate the time elapsed between two successive peaks to get the speed of rotation. Can someone guide me please. My code is attached below. Thanks in advance.
a = arduino;
for i=1:inf
tic;
encoder_signal(i)= readVoltage(a, 'A2');
figure(1);
plot(encoder_signal);
ylabel('Encoder signal');
hold on;
pause(0.001);
if encoder_signal == 4.5;
x(i) = toc;
Engine_RPM (i) = (1/x)*60 ;
end
end
  1 个评论
Pat Gipper
Pat Gipper 2021-3-26
How likely is it that the voltage is going to be exactly 4.5 Volts? I would think that you should trigger on the value exceeding a good threshold value (e.g. encoder_signal > 4).

请先登录,再进行评论。

采纳的回答

Pat Gipper
Pat Gipper 2021-3-27
I updated your code a bit and fed in an artificial signal. It works but has a slight error due to loop delays running on my computer. You may need to adjust the threshold from 4.5 V depending on your actual encoder signal. If there is a lot of noise then the edge trigger would need hysteresis added to prevent double triggering.

更多回答(0 个)

产品


版本

R2015a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by