have a figure slide under another

1 次查看（过去 30 天）
Vincent I
Vincent I 2013-6-24
Hi, I would like to have figure2 slide from behind figure 1 when I push a button. Unfortunately I was able to accoplish all that with exception of the sliding from behind. Each time I set the posiion it bring figure 2 to front and stays there. I know I can push figure 2 back behind figure 1 once I set the position however it does not look good or natural. Any ideas how to keep figure 2 behind the whole time? Thank you
figure 1
figure2('Visible','off')
figure(figure1)
for i = 1:65.2
set(figure2,'Position',[103.2+i 34.0769+10 62.8 15.6923])
end

请先登录，再回答此问题。

采纳的回答

Sean de Wolski
Sean de Wolski 2013-6-24
编辑：Sean de Wolski 2013-6-25
I don't really understand why you would want to do this, but here you go:
Updated
function moveFigureElegantly
hFig1 = figure;
set(hFig1,'units','normalized');
plot(1:10);
hFig2 = figure;
surf(peaks);
%Where do we want to go
trajectory = [sin(linspace(0,2*pi,100)).', cos(linspace(0,2*pi,100)).']./2+0.25;
ii = 0; %Where are we
% NOTE keeping width and height fixed, they could be changed as well
T = timer('Period',0.5,... %period
'ExecutionMode','fixedRate',... %{singleShot,fixedRate,fixedSpacing,fixedDelay}
'BusyMode','drop',... %{drop, error, queue}
'TasksToExecute',200,...
'StartDelay',0,...
'TimerFcn',@moveFig,...
'StartFcn',[],...
'StopFcn',[],...
'ErrorFcn',[]);
start(T);
function moveFig(~,~)
% increment location
ii = ii+1;
%Move the figure
set(hFig1,'position',[trajectory(ii,:), 0.5 0.5])
% reset after looping through
if ii == size(trajectory,1)
ii = 0;
end
end
end
  2 个评论
Vincent I
Vincent I 2013-6-25
well, it still brings the figure 2 on top of figure 1 when I make it visible with the code below. I think what I'm going to do is use your idea to make it work. Thank you
Sean de Wolski
Sean de Wolski 2013-6-25
See the edits. Now it follows a trajectory. There are a few different ways you can do this; personally I like nested functions for this application.

请先登录，再进行评论。

更多回答（2 个）

Evan
Evan 2013-6-24
编辑：Evan 2013-6-24
Does this work?
% Example
f = figure; % create first figure
g = figure; % create second figure (appears in front of first)
figure(f) % bring first figure to front
I tried out your example, and calling the figure that should be "in front" like I did above inside the loop seemed to do the trick.
  6 个评论
显示 4更早的评论
Vincent I
Vincent I 2013-6-24
My appologies....
No, figure1 should stay in front of figure 2 the whole time figure 2 is moving to the right.
what I mean is the figure that I already have do look really choppy and yeah they do flicker.
Evan
Evan 2013-6-24
Hmm, interesting. My way is certainly crude, though I don't experience any noticeable flicker due to the "bring to front." Perhaps Sean's solution will work for you.

请先登录，再进行评论。

Vincent I
Vincent I 2013-6-24
solved it by doing the following:
figure1
t=figure2
figure(figure1)
for i=1:63
set(t,'Position',[])
end
the initial problem was that instead of setting the handle I was setting the position of the figure itself. Works now
Thank you for your help

类别

在 Help Center 和 File Exchange 中查找有关 Environment and Settings 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by