Adding images to reach a final composite.

Question

Addison Collins 2021-5-11

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/827805-adding-images-to-reach-a-final-composite

评论： DGM 2021-5-13

Hello all, I am attempting to add several photos such that I can see the distribution of particles in a laser sheet as they exit a converging nozzle. I am having issues arriving at a final composite photo that contains the particles without over-saturating. Below I will post a few of the base photos (there are really several hundred). I will also show two methods I tried out but to no avail. I will detail the methods below next to their code.

Background photo (2/3 of the photos in the dataset are identical to this because the camera was not in sync with the laser pulses):

Particles photo 1:

Particles photo 2:

Method 1: In method 1 I converted the grayscale .bmp images to double (matrices) before handling them and converted them back mat2gray() before using imshow(). I noticed that the particles were bright when the first few photos were added, but they became dark as I progressed the loop. I also attemped a run involving subtracting the background image, but this led to worse results, as everything approached black (commented out in the bottom for-loop).

clear; clc; close all;
image_folder = 'E:\PIV Shakedown 1\run3\Photos'; % Path of photos
filenames    = dir(fullfile(image_folder,'*.bmp'));
nfiles       = length(filenames);
images       = cell(1,nfiles);
background            = imread('background.bmp'); % Background photo with laser off
background            = double(background);
for n = 1:nfiles
    f             = fullfile(image_folder,filenames(n).name);
    current_image = imread(f);
    current_image = double(current_image);
    images{n}     = current_image; % Several hundred photos, some with particles and some without
end
addition = images{1}; % Preparing the first photo for adding
for j = 1:88%nfiles-1
    addition = addition+images{j+1}; % -background; % Adding every photo in double format to prevent oversaturation (grayscale caps at 255)
    figure()                   % For debugging purposes
    imshow(mat2gray(addition)) % For debugging purposes
end
background_avg = addition/(j+1); % Creates a background based upon every photo summed in addition
% ISSUE: The below change to addition is pointless because background_avg*(j+1) = addition, thus the following subtraction = 0  
% addition       = addition - background_avg*(j+1); % Can use background or background_avg
background_avg = mat2gray(background_avg); 
figure()
imshow(mat2gray(addition))
figure()
imshow(background_avg)
figure()
imshow(mat2gray(background))

Resulting addition photos (at different loop iterations)

RUN 1: First addition involves a photo with no particles and one with sparse particles

j=1, first addition: Note that the particles are dimmer. This addition inluded a bright photo like the ones above.

j=5, fifth addition: Notice that the particles are even more dim (even though more particles are added on this 5th addition). Ideally the final photo will look like this but the particles wil be VERY obvious. Instead, after about 50 pictures you cannot distinguish any particles at all due to their continual approach to black in these photos.

Method 2: In method 2 I did not convert the photos to doubles, so I ran into the issue that is the grayscale range (0-255). I.E. 233+234 = 255 due to the cap.

%% Non-Normalizing
clear; clc; close all;
image_folder = 'E:\PIV Shakedown 1\run3\Photos'; % Path of photos
filenames    = dir(fullfile(image_folder,'*.bmp'));
nfiles       = length(filenames);
background   = imread('background.bmp'); % Background photo
images       = cell(1,552);
for n = 1:nfiles
    f             = fullfile(image_folder,filenames(n).name);
    current_image = imread(f);
    images{n}     = current_image;
end
addition = images{1};
for j = 1:250%nfiles-1 %nfiles when using all images
    addition = imadd(addition,images{j+1}); 
    addition = imsubtract(addition,background);
%     figure()
%     imshow(addition)
end
figure()
imshow(addition)

After 8 iterations of Method 2:

After 250 iterations of Method 2: Note that it isn't white purely due to particles, but the entire image creeps towards being white.

I appreciate any help!

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

DGM 2021-5-12

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/827805-adding-images-to-reach-a-final-composite#answer_697920

编辑：DGM 2021-5-12

在 MATLAB Online 中打开

By averaging, you're essentially extracting the BG, but not really in a way that would produce a BG estimate that's good for BG removal, since the estimate error is concentrated in the ROI. There are probably canonical ways to approach this, but with the tools I'm used to using, this is my first approximation:

n1=im2double(imread('nozzle1.bmp'));
n2=im2double(imread('nozzle2.bmp'));
n3=im2double(imread('nozzle3.bmp')); % added fake specks
n4=im2double(imread('nozzle4.bmp')); % added fake specks
ns = cat(4,n1,n2,n3);
nbg = extractbg(ns); % extract the bg
% normalize the abs(sum()) of frame differences from BG
nds = simnorm(abs(n1 + n2 + n3 - 3*nbg));

I added a few synthetic frames to see how it was going to work.

There aren't many frames in the sum, so it's not very populated. I can tweak the contrast for viewing purposes:

nds = imlnc(nds,'independent','k',1.2);

The behavior of extractbg() is nonlinear, which tends to be better than simple averaging at suppressing frame differences. It's basically an iterative interframe color-distance thresholding operation used to selectively ignore the parts of an image which change with respect to the current BG estimate. Its default initial estimate is the average, and it refines from there.

The BG extraction would likely improve with more frames, though using extractbg() with 4D arrays like this example is costly in terms of memory. It does support incremental operation on files, but only for video files. It could probably be adapted to work incrementally on a folder full of images. Matlab may have background extraction tools in the CV Toolbox, but I don't have that.

Overall, this might work as an example, but would need a lot of work in order to be practical for a full set of images this large.

The tools used in this example are from the MIMT, which is on the file exchange at the link above.

3 个评论
显示 1更早的评论隐藏 1更早的评论

Addison Collins 2021-5-12

在 MATLAB Online 中打开

Thank you @DGM, this response is extremely helpful! I did manage to adapt it to read photos directly from folders, but I found that you are unfortunately correct! extractbg() takes about 100 seconds in the code where I pull the photos from their directory. It takes only 3 seconds when I manually add the photos. I also noticed the manual method produced different results than it did when I pulled files from the folder. I attached 5 photos with particles in this comment, if you're interested.

My main question: is there is some simple modification to improve the runtime? Or should I sit down manually enter them all?. Also, do you know why the final product of each method below are different? The data types are double for both methods and they use the same 5 images. I suppose extractbg is doing a LOT more work for one which might mean different calculations(?).

Manual Method:

clc;clear;close all;
n1=im2double(imread('nozzle1.bmp'));
n2=im2double(imread('nozzle2.bmp'));
n3=im2double(imread('nozzle3.bmp'));
n4=im2double(imread('nozzle4.bmp'));
n5=im2double(imread('nozzle5.bmp'));
ns = cat(4,n1,n2,n3,n4,n5);
tic
nbg = extractbg(ns); % extract the bg, takes ~3.3 seconds (5 photos)
toc
% normalize the abs(sum()) of frame differences from BG
nds = simnorm(abs(n1 + n2 + n3 + n4 + n5 - 5*nbg));
% tweak the contrast for viewing purposes:
nds = imlnc(nds,'independent','k',1);
figure()
imshow(nds)

Pulled files from directory:

%% Averaging all photos
filenames    = dir(fullfile('*.bmp'));
nfiles       = length(filenames);
images       = cell(1,nfiles);
for n = 1:nfiles
    f             = fullfile(filenames(n).name);
    current_image = imread(f);
    images{n}     = double(current_image); % Several hundred photos, some with particles and some without
end
ns = images{1};
for i = 2:nfiles
     ns = cat(4,ns,images{i});
end
tic
nbg = extractbg(ns); % extract the bg, takes ~ 100 seconds (5 photos)
toc
% normalize the abs(sum()) of frame differences from BG
total = images{1};
for i = 2:nfiles
     total = total + images{i};
end
nds = simnorm(abs(total - nfiles*nbg));
% tweak the contrast for viewing purposes:
nds = imlnc(nds,'independent','k',1); 
figure()
imshow(nds)

Addison Collins 2021-5-13

在 MATLAB Online 中打开

I resolved the time issue and image discrepancy. Something about casting the image as a double. First I used

for n = 1:nfiles
    f             = fullfile(image_folder,filenames(n).name);
    current_image = imread(f);
    images{n}     = double(current_image); % Several hundred photos, some with particles and some without
end

But then I changed to im2double(imread(f)); and it fixed it all.

for n = 1:nfiles
    f             = fullfile(image_folder,filenames(n).name);
    current_image = im2double(imread(f)); % FIXED
    images{n}     = current_image; % Several hundred photos, some with particles and some without
end

DGM 2021-5-13

Yeah, double() just changes the class, so it's still in a [0 255] range. On the other hand, im2double() also normalizes the data to [0 1] range. You don't necessarily lose the data when you do it the first way, it's just that all the image handling tools expect float images to be normalized, so things like imshow() or imwrite() will truncate the data at the expected range.

请先登录，再进行评论。

Adding images to reach a final composite.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

3 个评论
显示 1更早的评论隐藏 1更早的评论

更多回答（0 个）

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

Adding images to reach a final composite.

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

3 个评论 显示 1更早的评论隐藏 1更早的评论

更多回答（0 个）

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

3 个评论
显示 1更早的评论隐藏 1更早的评论