How To Move OFDM Signal From BaseBand

4 次查看(过去 30 天)
yuvi
yuvi 2011-5-26
评论: chiju 2014-6-11
hi everybody
if anyone knows how to move this signal (bw=20MHz)
and to move it from 0-20MHz to 1920MHz-1940MHz
any help will be appreciated !
Here is the code :
clear all
nFFTSize =64 ;
% for each symbol bits a1 to a52 are assigned to subcarrier
% index [-26 to -1 1 to 26]
subcarrierIndex = [-26:-1 1:26];
nBit = 2500;
ip = rand(1,nBit) > 0.5; % generating 1's and 0's
nBitPerSymbol = 52;
nSymbol = ceil(nBit/nBitPerSymbol);
% BPSK modulation
% bit0 --> -1
% bit1 --> +1
ipMod = 2*ip - 1; %2500 {0 or 1]
ipMod = [ipMod zeros(1,nBitPerSymbol*nSymbol-nBit)]; % 1 x 2548
ipMod = reshape(ipMod,nSymbol,nBitPerSymbol); % 49 x 52
figure(1)
plot(ipMod)
st = []; % empty vector
for ii = 1:nSymbol
inputiFFT = zeros(1,nFFTSize);
% assigning bits a1 to a52 to subcarriers [-26 to -1, 1 to 26]
inputiFFT(subcarrierIndex+nFFTSize/2+1) = ipMod(ii,:);
% shift subcarriers at indices [-26 to -1] to fft input indices [38 to 63]
inputiFFT = fftshift(inputiFFT);
outputiFFT = ifft(inputiFFT,nFFTSize);
% adding cyclic prefix of 16 samples
outputiFFT_with_CP = [outputiFFT(49:64) outputiFFT];
st = [st outputiFFT_with_CP];
end
close all
fsMHz = 20;
[Pxx,W] = pwelch(st,[],[],4096,20);
figure(1)
plot([0:4095]*fsMHz/4095,10*log10(fftshift(Pxx)));
xlabel('frequency, MHz')
ylabel('power spectral density')
title('Transmit spectrum OFDM (based on 802.11a)');
  1 个评论
chiju
chiju 2014-6-11
please any idea on how to find the PAPR and spectrum of an OFDM baseband signal?

请先登录,再进行评论。

回答(1 个)

Yella
Yella 2011-6-14
Do frequency modulation.....
or else do upsampling of the signal that is increasing the sampling rate by padding zeros
  1 个评论
chiju
chiju 2014-6-11
please any idea on how to find the PAPR and spectrum of an OFDM baseband signal?

请先登录,再进行评论。

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by