Draw arc with specified angle difference

1 次查看（过去 30 天）
Elysi Cochin
Elysi Cochin 2021-6-9
评论： Star Strider 2021-6-10
Having 2 datas as attached in Data.mat, how to draw arc with a specified angle difference (angle difference can vary say 15, 30 or any other value as given by user)
The data columns in order are angle, radius, depth
How can i find the center with the attached data, so that both the arcs pass through the center, and display it in x,y,z coordinate
  3 个评论
显示 1更早的评论
Elysi Cochin
Elysi Cochin 2021-6-9
编辑：Elysi Cochin 2021-6-9
Sir the given values are in degrees, we need to convert it into radians. Compute the center and both the curves must pass through the center. Is it possible sir, with this information I have only so much details
Elysi Cochin
Elysi Cochin 2021-6-9
Sir, can you show me how to plot, if the angles are radian values (descending spiral)

请先登录，再进行评论。

请先登录，再回答此问题。

采纳的回答

Star Strider
Star Strider 2021-6-9
Try this —
LD = load('Data.mat');
Data1 = LD.Data1;
A1 = Data1(:,1);
R1 = Data1(:,2);
D1 = Data1(:,3);
Data2 = LD.Data2;
A2 = Data2(:,1);
R2 = Data2(:,2);
D2 = Data2(:,3);
ctrfcn = @(b,a,r,d) [sqrt((b(1)+r.*cosd(a)).^2 + (b(2)+r.*sind(a)).^2 + (b(3)-d).^2)];
[B1,fval] = fminsearch(@(b)norm(ctrfcn(b,A1,R1,D1)), -rand(3,1)*1E+4)
[B2,fval] = fminsearch(@(b)norm(ctrfcn(b,A2,R2,D2)), -rand(3,1)*1E+4)
figure
plot3(R1.*cosd(A1), R1.*sind(A1), D1, 'm')
hold on
plot3(R2.*cosd(A2), R2.*sind(A2), D2, 'c')
scatter3(B1(1), B1(2), B1(3), 30, 'm', 'p', 'filled')
scatter3(B2(1), B2(2), B2(3), 30, 'c', 'p', 'filled')
hold off
legend('Data_1','Data_2', 'Centre_1', 'Centre_2', 'Location','best')
grid on
The axes are not scaled to be equal, because it then appears to be a flat surface.
Data1 Center:
x = -740.85
y = -349.01
z = 3.83
Data2 Center:
x = -740.96
y = -348.77
z = 3.81
.
  5 个评论
显示 3更早的评论
Elysi Cochin
Elysi Cochin 2021-6-10
Sir, shall i ask you one thing, why does the plotted center point lie away from the curves?
What i meant by center is the center point of the curve (means if we take a line of 10cm the center point is 5cm). By center i meant that.
Star Strider
Star Strider 2021-6-10
As a general rule when talking about arcs or circles, the center is the center of the circle. It can never be on any of the circumferences.
You are asking for the midpoint of the arc.
MP1 = median([R1.*cosd(A1)+B1(1), R1.*sind(A1)+B1(2), D1],1);
MP2 = median([R2.*cosd(A2)+B2(1), R2.*sind(A2)+B2(2), D2],1);
fprintf(1,'Arc Midpoint 1:\n\t\tx = %8.2f\n\t\ty = %8.2f\n\t\tz = %8.2f\n',MP1)
fprintf(1,'Arc Midpoint 2:\n\t\tx = %8.2f\n\t\ty = %8.2f\n\t\tz = %8.2f\n',MP2)
produces —
Arc Midpoint 1:
x = 745.33
y = 366.43
z = 3.83
Arc Midpoint 2:
x = 752.68
y = 364.83
z = 3.82
That is the best I can do.

请先登录，再进行评论。

更多回答（2 个）

Image Analyst
Image Analyst 2021-6-9
  1 个评论
Elysi Cochin
Elysi Cochin 2021-6-9
Sir, i saw that link, but the data I have, is different with the example shown in the link.

请先登录，再进行评论。

darova
darova 2021-6-9
Ran in:
Wha about this representation?
s = load('data.mat');
t = linspace(0,1,20)*pi/180; % angle array
[X,Y,Z] = deal( zeros(10,20) ); % preallocation matrices
for i = 1:10
[X(i,:),Y(i,:)] = pol2cart(t*s.Data1(i,1),s.Data1(i,2)); % create arc
Z(i,:) = s.Data1(i,3); % depth
end
surf(X,Y,Z)
  1 个评论
Elysi Cochin
Elysi Cochin 2021-6-9
编辑：Elysi Cochin 2021-6-9
Sir how to convert the radius value from degrees to radians and plot the figure
also, at a time i want to give only one angle

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Characters and Strings 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by