清空筛选条件
清空筛选条件

To desing low pass FIR filter analysis and application

2 次查看（过去 30 天）
tilak tenneti
tilak tenneti 2013-8-31
1.to design lp fir filter using fir1, fir2 ,firpm 2. use three cutoff frequencies 500-1000hz, 1001-2000hz,2001-3000hz 3.plot frequency response using freqz and fft 4.find the group delay using angle() unwrap() freqz() and diff() 5.filter signal using filter() and then play original and sound and filtered using soundsc() 6.compare the outputs of myfilter() function to implement filtering operation
amongst all these please let me know how can i use combination like plot ( 20*log10(abs(fft(b,8000)))); type of command..
i already used fir1 and got attenuation of min 40db .. played the original sound signal.. struggling with from 3rd step starting with fft and plot function
thankyou

请先登录，再回答此问题。

采纳的回答

Youssef Khmou
Youssef Khmou 2013-9-1
Generally the returned values from filter design function are two vector a and b that represent the nominator and denominator of the the transfer function H, you can follow this protocol :
% Example of the vector a and b :
b=[1.2 0.9 1 2 2.3 6];
a=[1.6 0.75 1 1 -1 0.99];
N=512; % number of points for frequency computation
Fs=8000; % 8Khz
[h,f]=freqz(b,a,N,Fs);
figure, plot(f,20*log10(abs(h)));
  2 个评论
tilak tenneti
tilak tenneti 2013-9-1
hi youssef, in this case i have to take filter coefficients for b
i have tried this... x=wavread('thermo.wav'); soundsc(x,8000); b=fir1(100,0.385,'low'); a=fir1(200,0.475,'low'); N=512; Fs=8000; [h,f]=freqz(b,a,N,Fs); figure, plot(f,20*log10(abs(h)));
pls let me know how to use plot with diff angel and unwrap ??
Youssef Khmou
Youssef Khmou 2013-9-2
You can apply the Discrete Fourier Transform to vectors a and b you created :
a=fir1(200,0.475,'low');
Fa=fft(a);
figure, plot(20*log10(abs(Fa(1:end/2))));
figure,psd(a), % Built in function PSD
% Same goes for b .....
You can compute the phase angle as the following :
%Given your signal y original or filtered
Fy=fft(y);
P=unwrap(angle(Fy));
Frequency=(0:length(Fy)-1)'/length(Fy)*Fs;
figure, plot(Frequency,P);

请先登录，再进行评论。

更多回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Signal Processing Toolbox 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by