What's the best way to read an ASCII/txt file containing a few lines of text and then the data I want to load into a matrix?

Question

Mark 2013-10-8

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/89564-what-s-the-best-way-to-read-an-ascii-txt-file-containing-a-few-lines-of-text-and-then-the-data-i-wan

评论： Cedric 2013-10-8

I will have files converted to something like this:

Pad 1:1 /This is what the converter writes out /Not sure if it will have the same number of comments every time /information /more text

0      14.666
2     134.567
3    1567.435
      ...      ...

and so forth. I want to read only the numerical data into a matrix to later work with and prefer it to not be a hack job, and something that will consistently read in many files. Thanks!

- Mark

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Cedric 2013-10-8

2
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/89564-what-s-the-best-way-to-read-an-ascii-txt-file-containing-a-few-lines-of-text-and-then-the-data-i-wan#answer_99015

编辑：Cedric 2013-10-8

在 MATLAB Online 中打开

If you always have the same number of header lines, use TEXTSCAN and set the parameter 'HeaderLines' to a relevant value, e.g. 2 if you have two lines of header in each file.

In the example that you provided, it seems that you have have a line of text, an empty line, and then numbers, so you should be able to work with something like:

 fid  = fopen( 'myFile.txt', 'r' ) ;
 data = textscan( fid, '%f%f', 'HeaderLines', 2 ) ;
 fclose( fid ) ;

6 个评论
显示 4更早的评论隐藏 4更早的评论

Cedric 2013-10-8

编辑：Cedric 2013-10-8

在 MATLAB Online 中打开

There are several options; I guess that one of the classic approaches is something like

 data  = zeros( 1e6, 2 ) ;                   % Prealloc (see note 1).
 rowId = 0 ;
 fid   = fopen( 'myFile.txt', 'r' ) ;
 while ~feof( fid )
    line = fgetl( fid ) ;
    num  = sscanf( line, '%f %f'  ) ;
    if ~isempty( num )
       rowId = rowId + 1 ;
       data(rowId,:) = num.' ;
    end
 end
 fclose( fid ) ;
 data = data(1:rowId,:) ;                    % Truncate to filled portion.

Note 1 : prealloc for more rows (a million) than what you have in the file. This is not mandatory, but it prevents data to be reallocated each time a valid row is read, which is more efficient. If you don't know if a million is enough but you don't want to prealloc with more, you can implement a mechanism which adds another million each time rowId reach the size of the preallocated array. You would have to bring the following update in the internal IF statement:

    if ~isempty( num )
       rowId = rowId + 1
       if rowId > size( data, 1 )
          data = [data; zeros( 1e6, 2 )] ; 
       end
       data(rowId,:) = num.' ;
    end

If it is not efficient enough, you can read the file while SSCANF returns an empty array or eof(fid), and then read the rest of the file in one shot. It is not the first solution that I gave you because it is a bit more difficult to understand. You would have to implement something like (not tested):

 fid  = fopen( 'myFile.txt', 'r' ) ;
 data = [] ;
 while ~feof( fid ) && isempty( data )
    line = fgetl( fid ) ;
    data = sscanf( line, '%f %f' ).' ;
 end
 if ~feof( fid )
    data = [data; fscanf( fid, '%f %f', [2, Inf] ).'] ;
 end
 fclose( fid ) ;

Mark 2013-10-8

Thank you for the help. I ended up checking for the comment delimiter and using fgetl until it hit the data. From there textscan just read the rest of the text file and only put in numbers. Thanks again

Cedric 2013-10-8

编辑：Cedric 2013-10-8

You're welcome, just be careful not to loose the first line of data; if it was read by FGETL, it won't be read by TEXTSCAN as the file pointer was moved by FGETL after this line. This is why I have the concatenation in my last solution.

请先登录，再进行评论。

What's the best way to read an ASCII/txt file containing a few lines of text and then the data I want to load into a matrix?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

6 个评论
显示 4更早的评论隐藏 4更早的评论

更多回答（0 个）

另请参阅

类别

标签

产品

Community Treasure Hunt

What's the best way to read an ASCII/txt file containing a few lines of text and then the data I want to load into a matrix?

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

6 个评论 显示 4更早的评论隐藏 4更早的评论

更多回答（0 个）

另请参阅

类别

标签

产品

Community Treasure Hunt

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

6 个评论
显示 4更早的评论隐藏 4更早的评论