Why am I unable to download my application to the Phytec MPC555 development board using the serial port?
显示 更早的评论
I am able to download my application using the BDM connection and have verified that the serial port is working. When I tried to download using the Serial port, I get the following error message:
Serial communication synchronisation failed: No response for the TARGET ALIVE byte was received from the target, after 1000 retries.
Please check that your target hardware is configured correctly, and the correct "Communication Options" have been selected.
采纳的回答
MathWorks Support Team
2009-6-27
0 个投票
There can be a number of reasons for this error. Check the following:
1. Do you have the correct serial cable connected to the correct ports (host side and target side)? Is it a 'straight-through' cable, i.e. not null modem (as supplied with some Phytec hardware packages).
2. Is the boot code installed correctly? If other applications have been executed via BDM and produce the expected behavior then this indicates that the installation is complete.
3. Have you reset the hardware immediately after initiating the download from MATLAB? Normally it is necessary to do this so as to execute the boot code which responds to the host request to initiate a download.
4. Check to make sure JUMPER 6 is open for serial download.
更多回答（0 个）
类别
在 帮助中心 和 File Exchange 中查找有关 Code Generation 的更多信息
2009-6-27
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!
Translated by 
