主要内容

搜索


Shore
Shore
上次活动时间: 2023-12-30

AI Chat: Thumbs Up/Down

This is not a question, it is my attempt at complying with the request for thumbs up/down voting. I vote thumbs up, for having AI.....
I am not sure if specific AI errors are to be reported. Other messages I just read from others here and the AI Chat itself clearly state that errors abound.
My AI request was: "Plot 300 points of field 2"
AI Chat gave me, in part:
data = thingSpeakRead(channelID, 'Fields', 2, 'NumPoints', 300, 'ReadKey', readAPIKey);
% Extract the field values
field1Values = data.Field1;
% Plot the data
plot(field1Values);
The AI code failed due to "Dot indexing is not supported for variables of this type"
So, I corrected the code thus to get the correct plot:
data = thingSpeakRead(channelID, 'Fields', 2, 'NumPoints', 300, 'ReadKey', readAPIKey);
% Extract the field values
%field1Values = data.Field1;
% Plot the data
plot(data);
I see great promise in AI Chat.
Opie
Kali
Kali
上次活动时间: 2023-12-21

Help

Write a matlab script that will print the odd numbers, 1 through 20, in reverse.
I cannot figure out how to do this correctly, please help.
I saw this post on Answers.
https://www.mathworks.com/matlabcentral/answers/2046770-explaining-a-matlab-code/?s_tid=ans_lp_feed_leaf
I was impressed at the capability of the AI, as I have been at other times when I posed a question to it, at least some of the time. So much so that I wondered...
What if the AI were automatically applied to EVERY question on Answers? Would that be a good or bad thing? For example, suppose the AI automatically offers an answer to every question as soon as it gets posted? Of course, users would still be allowed to post their own, possibly better answers. But would it tend to disincentivise individuals from ansering questions?
Perhaps as bad, would it push Answers into the mode of a homework solving forum? Since if every homework question gets a possibly pretty good automatic AI generated solution, then every student will just post all HW questions, and the forum would quickly become overwhelmed.
I suppose one idea could be to set up the AI to post an answer to all un-answered questions that are at least one month old. Then students would not gain by posting their homework.
The MATLAB AI Chat Playground is open to everyone!
Check it out here on the community: https://www.mathworks.com/matlabcentral/playground
MATLAB AI Chat Playground Screenshot
I just published a blog post announcing the release.
Thats the task:
Given a square cell array:
x = {'01', '56'; '234', '789'};
return a single character array:
y = '0123456789'
I wrote a code that passes Test 1 and 2 and one that passes Test 3 but I'm searching a condition so that the code for Test 3 runs when the cell array only contains letters and the one for Test 1 and 2 in every other case. Can somebody help me?
This is my code:
y = []
[a,b]=size(x)
%%TEST 3
delimiter=zeros(1,a)
delimiter(end)=1
delimiter=repmat(delimiter,1,b)
delimiter(end)=''
delimiter=string(delimiter)
y=[]
for i=1:a*b
y = string([y x(i)])
end
y=join(y,delimiter)
y=erase(y,'0')
y=regexprep(y,'1',' ')
%%TEST 1+2
for i=1:a*b
y = string([y x(i)])
y=join(y)
end
y=erase(y,' ' )
Mayla
Mayla
上次活动时间: 2023-9-13

Problem 2022. Find a Pythagorean triple

That's the question: Given four different positive numbers, a, b, c and d, provided in increasing order: a < b < c < d, find if any three of them comprise sides of a right-angled triangle. Return true if they do, otherwise return false .
I wrote this code but it doesn't pass test 7. I don't really understand why it isn't working. Can somebody help me?
function flag = isTherePythagoreanTriple(a, b, c, d)
a2=a^2
b2=b^2
c2=c^2
d2=d^2
format shortG
if a2+b2==c2
flag=true
else if a2+b2==d2
flag=true
else if a2+c2==d2
flag=true
else if c2+b2==d2
flag=true
else flag=false
end
end
end
end
end
Mayla
Mayla
上次活动时间: 2023-10-24

Problem 44952. Find MPG of Lightest Cars

That's the question:
The file cars.mat contains a table named cars with variables Model, MPG, Horsepower, Weight, and Acceleration for several classic cars.
Load the MAT-file. Given an integer N, calculate the output variable mpg.
Output mpg should contain the MPG of the top N lightest cars (by Weight) in a column vector.
I wrote this code and the resulting column vector has the right values but it doesn't pass the tests. What's wrong?
function mpg = sort_cars(N)
load cars.mat
sorted=sortrows(cars,4)
mpg = sorted(1:N,2)
end
I recently have found that I am no longer able to give my difficulty rating for questions on Cody after sucessfully completing a question. This is obviously not a big deal, I was just wondering if this was an issue on my end or if there was some change that I was not aware of.
The option to rate does not pop up after solving a problem, and the rating in general does not even show up anymore when answering questions (though it is visible from problem groups).
When solving problems over on Cody, I can almost always view all solutions to a problem after submitting a correct solution of my own. Very rarely, however, this is not the case, and I instead get the following message:
This solution is locked. To view this solution, you need to provide a solution of the same size or smaller.
You may solve another problem from Community group to unlock all the solutions to this problem.
If this happens, then again, I can almost always rectify this by submitting a (correct) solution to a different problem (I take it that the Community group is the implicit group of all problems on Cody --- is it?). But sometimes that, too, fails.
So my question is, why? What are the criteria that determine when all solutions are, in fact, unlocked?
(There is a related question here, but I feel the posted answer does not answer the question.)
Simple question: I noticed there's a Modeling & Simulation Challenge Master badge over on Cody, but I can't find the corresponding group. So: where is it? Does it still exist at all?
Error: The server timed out while running and assessing your solution in MATLAB CODY. How do I resolve this? My code is correct. I have run it on PC. But, when i submit in CODY the server throws an error.
Just in case, I have my license of MATLAB. I just have this question and I didn't find any information. I wouldn't like to create another account, for this reason I prefer to ask here.
I have submitted a problem in cody some days back. Now it is not showing in my profile. Initially it was accepted and some people submitted the solutions also, however It has been removed after that, are there some guidelines which I am not following?
Hi everyone
I am a new of this community and I very interested in this forum and Matlab.I am trying to submit a soultion but as tiltle my code has a built-in function so the test systerm dont reconisie it.It run completely ok on my computer.
This is problem
https://www.mathworks.com/matlabcentral/cody/problems/45196-determine-whether-a-given-point-is-inside-or-outside-a-polygon/solutions/new
This is my solution
function [boOut] = BoIfPointInPoly(PolyMatrix,p_test)
%Summary of this function goes here
%{
if we draw a line from test point to a central point of a side of The polygon
then we extend that line to the furthest point of the polygon ensure that
line go through all side of Polygon in 1 direction.I call that line is line_test
Next find number of intersert of line test and all sides w polyxpoly
function
num interset point is odd mean p_test inside
num interset point is even mean p_test outside
this solution go from the concept that if a line go in from a side it has go out
from other side.So if it go in but not go out that mean it start from
inside.
%}
% Detailed explanation goes here
%line from p test throuh central of a side to furthest point of polygon
%find vector
V = ((PolyMatrix(1,:) + PolyMatrix(2,:)) /2) - p_test ;
%draw that vector to furtest point
pend = p_test + V * max(PolyMatrix(:));
%with multi of V and biggest element I assume that line will go all out the
%polygon which ensure out logic will right
line_test = [p_test ; pend];
disp('Our line test\n');
disp(line_test);
%find interst point
p_inter = polyxpoly(PolyMatrix(:,1),PolyMatrix(:,2),line_test(:,1),line_test(:,2));
%find number of interset (row)
[numIntere,trash] = size(p_inter);
disp('Number of interest point:');
disp(numIntere);
%determine in or out
if (rem(numIntere,2) == 0)
boOut = 0;
else
boOut = 1;
end
end
Can anyone has solution.
I'm trying to solve one problem in Cody, but a function 'fmincon' is not recognized by the online compiler. Is there any way to use functions in optimization toolbox in Cody?
Mariola Camacho Lie
Mariola Camacho Lie
上次活动时间: 2021-10-23

Problemas in Cody Area

I already solved some problems in Cody, why does he not increase my points or allow me to earn badges?
I need to put a number of problems on MATLAB cody under same Problem group, as many other people have done.
Can anyone please help me on this.
I created a problem in Cody that approximates e. To test the user's solution, I compare their solution to e. What I want to do instead is compare the user's solution to my reference solution. The question is how do I call the reference solution in the test suite?
This is currently my test suite.
sol=exp(1);
y_correct = playgame();
assessVariableEqual('y_correct',sol);
I created several problems recently in CODY. Some of them got removed automatically. I was curious as to why.
It is possible that the problems used latex in their description, so I am not sure if that was the reason they got rejected by the cody server.