MATLAB Central Discussions - Join the conversation!

搜索

Nicolas Douillet
Nicolas Douillet
上次活动时间: 大约 18 小时 前

Matlab and the Matrix

Trinity
  • It's the question that drives us, Neo. It's the question that brought you here. You know the question, just as I did.
Neo
  • What is the Matlab?
Morpheus
  • Unfortunately, no one can be told what the Matlab is. You have to see it for yourself.
And also later :
Morpheus
  • The Matlab is everywhere. It is all around us. Even now, in this very room. You can feel it when you go to work [...]
The Architect
  • The first Matlab I designed was quite naturally perfect. It was a work of art. Flawless. Sublime.
[My Matlab quotes version of the movie (Matrix, 1999) ]
查看完整帖子
Modern engineering requires both robust hardware and powerful simulation tools. MATLAB and Simulink are widely used for data analysis, control design, and embedded system development. At the same time, Kasuo offers a wide range of components—from sensors and connectors to circuit protection devices—that engineers rely on to build real-world systems.
By combining these tools, developers can bridge the gap between simulation and implementation, ensuring their designs are reliable and ready for deployment.
Example Use Case: Sensor Data Acquisition and Processing
  1. Kasuo Hardware Setup
  • Select a Kasuo sensor (e.g., temperature, microphone, or motion sensor).
  • Connect it to a DAQ or microcontroller board for data collection.
  1. Data Acquisition in MATLAB
  • Use MATLAB’s Data Acquisition Toolbox to stream sensor data directly.
  • Example snippet:
s = daq("ni");
addinput(s,
"Dev1", "ai0", "Voltage");
data = read(s, seconds(
5), "OutputFormat", "Matrix");
plot(data);
  1. Signal Processing with Simulink
  • Build a Simulink model to filter noise, detect anomalies, or design control logic.
  • Simulink enables real-time visualization and iterative tuning.
  1. Validation & Protection Simulation
  • Add Kasuo’s circuit protection components (e.g., TVS diodes, surge suppressors) in the physical design.
  • Use Simulink to simulate stress conditions, validating system robustness before hardware testing.
Benefits of the Workflow
  • Faster prototyping with MATLAB & Simulink.
  • Greater reliability by incorporating Kasuo protection devices.
  • Seamless transition from model to hardware implementation.
Conclusion
Kasuo’s electronic components provide the hardware foundation for many embedded and signal processing applications. When combined with MATLAB and Simulink, engineers can design, simulate, and validate systems more efficiently—reducing risks and development time.
查看完整帖子
Rizwan Khan
Rizwan Khan
上次活动时间: 2025-9-2，5:50

When will matlab build a coding agent?

With AI agents dev coding on other languages has become so easy.
Im waiting for matlab to build something like warp but for matlab.
I know they have the current ai but with all respect it's rubbish compared to vibe coding tools in others sectors.
Matlab leads AI so it really should be leading this space.
Yann Debray
Yann Debray
上次活动时间: 2025-8-28，10:38

MATLAB vs TensorFlow vs PyTorch

Hello MATLAB Central community,
My name is Yann. And I love MATLAB. I also love Python ... 🐍 (I know, not the place for that).
I recently decided to go down the rabbit hole of AI. So I started benchmarking deep learning frameworks on basic examples. Here is a recording of my experiment:
MATLAB vs TensorFlow vs PyTorch
Happy to engage in the debate. What do you think?
Ceci
Ceci
上次活动时间: 2025-8-26，17:59

MATLAB Cross Stitch!

I designed and stitched this last week! It uses a total of 20 DMC thread colors, and I frequently stitched with two colors at once to create the gradient.
查看完整帖子
When you compare MATLAB Plot Gallery with matplotlib gallery, you can see that matplotlib gallery contains a lot of nice graphs which are easy to create in MATLAB but not listed in MATLAB Plot Gallery.
For example, "Data Distribution Plots" section in the MATLAB Plot Gallery includes example for pie function instead of examples for piechart and donutchart functions, etc.
Ian
Ian
上次活动时间: 2025-8-14，22:10

Major annoyance: mlapp and others are binaries

mlapp being a binary is a pain point for source control. It means that you either have to:
  1. have hooks in your source control system to zip/unzip a mlapp. However, The Mathworks have informed users not to rely on this as the mlapp format may change.
  2. do all your source control in MATLAB. This is non standard behaviour. Source code and source control should be independent of each other. Web front-ends to source control systems, 3rd party source control apps, CI/CD systems and much more are extremely limited in what they can do with mlapps.
I wish an mlapp could just be a directory full of the required text/other files.
Requested to post this here from reddit.
There is no call to rescan audio devices in audioPlayerRecorder, even though PortAudio has such a call. I have a measurement environment that takes a long time to initialise. If I forget to plug in my audio device, I have to do it all over again...
Mike Croucher
Mike Croucher
上次活动时间: 2025-8-13，13:46

LLMs with MATLAB updated to support GPT-5 models

Large Language Models (LLMs) with MATLAB was updated again today to support the newly released OpenAI models GPT-5, GPT-5 mini, GPT-5 nano, GPT-5 chat, o3, and o4-mini. When you create an openAIChat object, set the ModelName name-value argument to "gpt-5", "gpt-5-mini", "gpt-5-nano", "gpt-5-chat-latest", "o4-mini", or "o3".
This is version 4.4.0 of this free MATLAB add-on that lets you interact with LLMs on MATLAB. The release notes are at Release v4.4.0: Support for GPT-5, o3, o4-mini · matlab-deep-learning/llms-with-matlab
I used it recently to play with the new open-weight models released by OpenAI.
David
David
上次活动时间: 2025-8-12，14:30

Guidelines & Tips When Posting Your Idea📝

Share your ideas, suggestions, and wishlists for improving MathWorks products. What would make the software absolutely perfect for you? Discuss your idea(s) with other community users.

Guidelines & Tips

We encourage all ideas, big or small! To help everyone understand and discuss your suggestion, please include as much detail as possible in your post:
  • Product or Feature: Clearly state which product (e.g., MATLAB, Simulink, a toolbox, etc.) or specific feature your idea relates to.
  • The Problem or Opportunity: Briefly describe what challenge you’re facing or what opportunity you see for improvement.
  • Your Idea: Explain your suggestion in detail. What would you like to see added, changed, or improved? How would it help you and other users?
  • Examples or Use Cases (optional): If possible, include an example, scenario, or workflow to illustrate your idea.
  • Related Posts (optional): If you’ve seen similar ideas or discussions, feel free to link to them for context.

Ready to share your idea?

Click here and then "Start a Discussion”, and let the community know how MATLAB could be even better for you!
Thank you for your contributions and for helping make MATLAB Central a vibrant place for sharing and improving ideas.
查看完整帖子
michio
michio
上次活动时间: 2025-8-6，0:40

MATLAB コードをみんなに使ってもらう！

作ったコードは公開して使ってもらいましょう！ということでその方法をブログで紹介します。
あなたの MATLAB コードをもっと多くの人に使ってもらうための3つのステップ
GitHub や File Exchange で公開しているコードがあれば、ぜひこのスレで教えてください！
ブログで紹介している大まかな３ステップをここにまとめます。
1. GitHub でコードを公開・開発する
  • GitHub 上でのリポジトリ公開はコミュニティ形成にもつながります。
  • R2025a 以降は MATLAB の Markdown サポートも強化されており、README.md を充実させると理解や導入が促進されます。
2. File Exchange に展開（GitHub と連携して自動同期）
  • File Exchangeで公開することで MATLAB 内から検索・インストールが可能になります。
  • GitHub と File Exchange の連携設定により、GitHub の更新を自動的に File Exchange に反映させることも可能です。
3. 「Open in MATLAB Online」ボタンやリンクを追加
  • GitHub リポジトリに「Open in MATLAB Online」リンクやボタンを埋め込むことで、ブラウザ上でコードを試せます。
查看完整帖子
Hey cody fellows :-) !
I recently created two problem groups, but as you can see I struggle to set their cover images :
What is weird given :
  • I already did it successfully twice in the past for my previous groups ;
  • If you take one problem specifically, Problem 60984. Mesh the icosahedron for instance, you can normally see the icon of the cover image in the top right hand corner, can't you ?
  • I always manage to set cover images to my contributions (mostly in the filexchange).
I already tried several image formats, included .png 4/3 ratio, but still the cover images don't set.
Could you please help me to correctly set my cover images ?
Thank you.
Nicolas
查看完整帖子
Chen Lin
Chen Lin
上次活动时间: 2025-8-4，21:40

GenZ Youtube short explaining MATLAB

Resharing a fun short video explaining what MATLAB is. :)
https://youtube.com/shorts/UOvziSyhoHs?si=6QFHsxY3h41MC7le
Nice to have - function output argument provide code assist when said function is called
This is a feature which doesn't apear to currently exist, but I think alot of matlab users would like, particularly ones who write alot of custom classes.
Imagine i have a custom class with some properties:
classdef CustomClass < handle
properties
name (1,1) string = "default name"
varOne (1,1) double = 0
end
methods
function obj = CustomClass(name,varOne)
obj.name = name;
obj.VarOne = varOne;
end
end
end
Then imagine I have a function which returns one of these custom class objects:
function [obj] = Calculation(Var1,Var2,name)
arguments (Input)
Var1 (1,1) double
Var2 (1,1) double
end
arguments (Output)
obj (1,1) CustomClass
end
results = Var1 + Var2;
obj = CustomClass(name,result);
end
With this class and this function which returns one of these class objects, I would like the fact that I provided "(1,1) CustomClass" in the output arguemnts block of function "Calculation(Var1,Var2,name)" to trigger code assist automaticaly show me, when writing code that the retuned value from this funciton has properties "name" and "varOne" in the object.
For istance, if I write the following code with this function and the class in the Matlab search path
testObj = Calculation(1,1,"test");
testObj.varOne = 10; %the property "varOne" doesn't apear in code assist when writing this line of code
I would like that the fact function "Calcuation(Var1,Var2,name) has the output arguments block enforcing that this function must return an object of "CustomClass" to make code assist recognise that "testObj" is a "CustomClass" object, just as if testObj was an input argument to another function which had an input argument requiring that "testObj" was a "CustomClass" object.
Maybe this is a feature that may be added to matlab in future releases? (please and thank you LOL)
查看完整帖子
This is a feature which doesn't apear to currently exist, but I think alot of matlab users would like, particularly ones who write alot of custom classes.
Imagine i have a custom class with some properties:
classdef CustomClass < handle
properties
name (1,1) string = "default name"
varOne (1,1) double = 0
end
methods
function obj = CustomClass(name,varOne)
obj.name = name;
obj.VarOne = varOne;
end
end
end
Then imagine I have a function which returns one of these custom class objects:
function [obj] = Calculation(Var1,Var2,name)
arguments (Input)
Var1 (1,1) double
Var2 (1,1) double
end
arguments (Output)
obj (1,1) CustomClass
end
results = Var1 + Var2;
obj = CustomClass(name,result);
end
With this class and this function which returns one of these class objects, I would like the fact that I provided "(1,1) CustomClass" in the output arguemnts block of function "Calculation(Var1,Var2,name)" to trigger code assist automaticaly show me, when writing code that the retuned value from this funciton has properties "name" and "varOne" in the object.
For istance, if I write the following code with this function and the class in the Matlab search path
testObj = Calculation(1,1,"test");
testObj.varOne = 10; %the property "varOne" doesn't apear in code assist when writing this line of code
I would like that the fact function "Calcuation(Var1,Var2,name) has the output arguments block enforcing that this function must return an object of "CustomClass" to make code assist recognise that "testObj" is a "CustomClass" object, just as if testObj was an input argument to another function which had an input argument requiring that "testObj" was a "CustomClass" object.
Maybe this is a feature that may be added to matlab in future releases? (please and thank you LOL)
查看完整帖子
群馬産業技術センター様をお招きし、製造現場での異常検知の取り組みについてご紹介いただくオンラインセミナーを開催します。
実際の開発事例を通して、MATLABを使った「教師なし」異常検知の進め方や、予知保全に役立つ最新機能もご紹介します。
✅ 異常検知・予知保全に興味がある方
✅ データ活用を何から始めればいいか迷っている方
✅ 実際の現場事例を知りたい方
ぜひお気軽にご参加ください！
https://jp.mathworks.com/company/events/webinars/upcoming/latest-case-study-and-cutting-edge-technologies-in-anomaly-detection-4871500.html

予兆を見逃すな！異常検知の最新事例とその技術

Accelerating the pace of engineering and science.

jp.mathworks.com

Hey MATLAB enthusiasts!
I just stumbled upon this hilariously effective GitHub repo for image deformation using Moving Least Squares (MLS)—and it’s pure gold for anyone who loves playing with pixels! 🎨✨
Repo Link: cuixing158/Moving-Least-Squares-Image-Deformation Why It’s Awesome:
  1. Real-Time Magic ✨
  • Precomputes weights and deformation data upfront, making it blazing fast for interactive edits. Drag control points and watch the image warp like rubber! (2)
  • Supports affine, similarity, and rigid deformations—because why settle for one flavor of chaos?
  1. Single-File Simplicity 🧩
  • All packed into one clean MATLAB class (mlsImageWarp.m).
  1. Endless Fun Use Cases 🤹
  • Turn your pet’s photo into a Picasso painting.
  • "Fix" your friend’s smile... aggressively.
  • Animate static images with silly deformations (1).
Try the Demo!
查看完整帖子
You are not a jedi yet !
20%
We not grant u the rank of master !
0%
Ready are u? What knows u of ready?
0%
May the Force be with you !
80%
5 个投票
Simulinkモデルを生成AIで自動的に作成できたら便利だと思いませんか？
QiitaのSacredTubesさんは、このアイデアを実験的に試みた記事を公開しています。
「生成AIを使ってSimulinkシミュレーションモデルを生成してみた #モデルベース開発 - Qiita」
その方法は、まず生成AIでVerilogコードを作成し、それをSimulinkに取り込んでモデル化するというものです。（ここではHDL Coderというツールボックスの機能が使われました：importhdl）
まだ実用段階には至っていませんが、モデルベース開発（MBD）と生成AIの可能性を探る上で、非常に興味深い試みです。
生成AIの限界と可能性を考えるきっかけとして、一読の価値があります。
---
もし「Simulink Copilot」のような生成AIツールが登場するとしたら、
どんな機能があったら嬉しいと思いますか？
  • 自然言語でブロック図を生成？
  • 既存モデルの自動ドキュメント化？
  • シミュレーション結果の要約と解釈？
皆さんのアイデアをぜひシェアしてください！
查看完整帖子
毎回 MATLAB を立ち上げたときに実行される startup，閉じるときに実行される finish って使ってますか？
久々に startup.m を開いてみたら
format short
format compact
disp("Ready")
の3行がありました．何らかの理由で format 設定を変えたとしても次回起動したときにはお気に入りの format に戻っているというのは嬉しいですよね！
disp("Ready")
は特に意味はありませんが，表示されると「さあ，始めよう！」って気分になります．（笑）