Synchronous TDM Simulation

版本 1.0.0 (25.6 KB) 作者: Jose Jimenez

A sub-system based Simulink model is presented to simulate the Synchronous Time Division Multiplexing process in communication systems.

关注

5.0

(1)

162.0 次下载

更新时间 2021/10/7

查看许可证

Four sine signals are time-division-multiplexed through an ideal channel. Three subsystems are present in the model:

1. MUX: Consists of a level-controlled multiport switch that passes the four signals to a Sample and Hold block to create the transmitted series of slots.

2. DEMUX: Consists of a series of switches controlled by the same level logic as the MUX block that pass each signal slot to a single wire.

3. Filtering: This subsystem is extracted from Abhilash Singh's TDM Simulink model and its function is to recover the analog signals.

*Note: MUX's signal "Sync" is the multilevel signal used for message/channel selection.

ABHILASH SINGH (2021). Time Division Multiplexing of four signals using simulink (https://www.mathworks.com/matlabcentral/fileexchange/48340-time-division-multiplexing-of-four-signals-using-simulink), MATLAB Central File Exchange. Retrieved October 7, 2021.

引用格式

Jose Jimenez (2024). Synchronous TDM Simulation (https://www.mathworks.com/matlabcentral/fileexchange/100391-synchronous-tdm-simulation), MATLAB Central File Exchange. 检索来源 2024/10/2.