Two Level Mobile Robot Control System

版本 1.0.0.3 (376.1 KB) 作者: Ryhor Prakapovich
This package contains files necessary to build mobile robot that can travel along road and corridors
816.0 次下载
更新时间 2020/6/16

We will use the Mobile Robot with the Two-Tier Control System to cover three topics:
1. To program a Raspberry Pi with Simulink.
2. To program Arduino Mega with Simulink.
3. To make Raspberry Pi and Arduino communicate with each other.
By the end of this description you will see a Mobile Robot programmed to detect and follow a linear perspective point using Simulink Support Packages for Raspberry Pi and Arduino Hardware.
https://www.youtube.com/watch?v=42we9W22iCM

1. Мodel HighLevel_RaspberryPi simulate the vision system that allows a mobile robot to travel along straight road sections and corridors on the basis of linear perspective point detect. Camera Board or web camera must have connected to Raspberry Pi.
2. Model LowLevel_Arduino simulate a simple closed-loop control algorithm which use the difference between two encoder outputs to calculate the power that should be applied to each wheel individually.
3. In this project Raspberry Pi and Arduino Mega communicate with each other through the serial interface. However, despite the fact that the Raspberry Pi has the hardware parallel interface (UART), but it is not among the Simulink’s blocks as that of Arduino. To solve this problem for Raspberry Pi was developed the block of software parallel interface. But there is still a problem: UART port Arduino powered by 5 V, and Raspberry - from 3.3 V. For this Raspberry Rx pin was connected to the Arduino Tx pin through two resistors as shown in the pict.
For camera resolution at 320x240 pixels and UART port settings at 600-2400 baud rate was obtained maximum of 4-8 frames per second.
The project includes the following files:
• HighLevel_RaspberryPi.slx
• LowLevel_Arduino.slx.

引用格式

Ryhor Prakapovich (2024). Two Level Mobile Robot Control System (https://github.com/rprakapovich/twolevelcontrol/releases/tag/v1.0.0.3), GitHub. 检索来源 .

MATLAB 版本兼容性
创建方式 R2016a
兼容任何版本
平台兼容性
Windows macOS Linux

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!
版本 已发布 发行说明
1.0.0.3

See release notes for this release on GitHub: https://github.com/rprakapovich/twolevelcontrol/releases/tag/v1.0.0.3

1.0.0.0

要查看或报告此来自 GitHub 的附加功能中的问题,请访问其 GitHub 仓库
要查看或报告此来自 GitHub 的附加功能中的问题,请访问其 GitHub 仓库