Buck Converter using inductor current control method

版本 1.1.0.0 (27.2 KB) 作者: Niranjan Bhujel
It steps down DC voltage.
712.0 次下载
更新时间 2017/3/30

查看许可证

It steps down DC voltage from 70 V to 20 V. It measures the output voltage and compares with reference voltage. Their difference is passed to PI controller which gives current to be drawn to maintain output voltage to reference value. This calculated reference current is compared with actual inductor current. If actual inductor current is less than calculated reference current, then switchin mosfet S is turned on so that inductor current increases. If actual inductor current is greater than calculated reference current, then switchin mosfet S is turned off so that inductor current decreases. In this way, output voltage is regulated.

引用格式

Niranjan Bhujel (2024). Buck Converter using inductor current control method (https://www.mathworks.com/matlabcentral/fileexchange/62137-buck-converter-using-inductor-current-control-method), MATLAB Central File Exchange. 检索来源 .

MATLAB 版本兼容性
创建方式 R2016b
兼容任何版本
平台兼容性
Windows macOS Linux
类别
Help CenterMATLAB Answers 中查找有关 Sensors and Transducers 的更多信息
社区

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!
版本 已发布 发行说明
1.1.0.0

.

1.0.0.0