Computational-Electromagnetics

The code implements Line Charge distribution on a thin wire which is maintained at V volt.
Here parameters are:
V = 1V
Length of wire, L = 1m
Radius of wire, a = 1mm

The Method of moment technique is used.
The basis function used is Triangular Function,
The testing function used is Delta (Point Matching).
For other specification, Parameters can be changed. For smooth variation the Value of section , N has to be increased.

The outer charge is starting from zero because, the triangular basis function is used from L = 0, The outer most triangular function can be made Half triangular to have high charge density at the ends of the wire.