1-Wire Add-On Library for Arduino

Communicate with 1-Wire devices connected to Arduino hardware in MATLAB.
575.0 次下载
更新时间 2024/4/16

查看许可证

This add-on extends MATLAB Support Package for Arduino Hardware to read from and write to 1-Wire devices. With the add-on, you can reset the device, read or write a single byte or multiple bytes from or to the device and also check the data integrity using either CRC8 or CRC16 algorithm.
Sample usage:
Create arduino object with the add-on library
a = arduino('COM38', 'Uno', 'Libraries', 'PaulStoffregen/OneWire');
Create 1-Wire object
sensor = addon(a, 'PaulStoffregen/OneWire');
Obtain sensor ROM address
addr = sensor.AvailableAddresses{1};
Reset sensor
reset(sensor);
Write to sensor
write(sensor, addr, 72, 1) % parasite power on
Read 9 bytes from sensor
read(sensor, addr, 9)
Check CRC of received data
checkCRC(sensor, [1 2 3 4], 56, crc8)
It includes documentation and an example that demonstrates the use with a DS18B20 temperature sensor and DS2431 1024-bit EEPROM.
Important: Before using this add-on library in MATLAB, you need to install the OneWire Arduino library. Here are the instructions:
Installation
  1. Download the zip file from https://github.com/PaulStoffregen/OneWire/archive/v2.3.2.zip
  2. Unpackage the zip into local directory and rename the folder to ‘OneWire’.
  3. Move the ‘OneWire’ folder into the "libraries" folder inside your Arduino sketchbook folder:
For R2019a:
  • On Windows®, the default path is "Documents\Arduino\libraries\"
  • On Mac®, the default path is "~/Documents/Arduino/libraries/"
  • On Linux®, the default path is "/home/<username>/Arduino/libraries"
For R2019b and later:
  • On Windows®, the default path is "Arduino IDE Path\portable\sketchbook\libraries\"
  • On Mac®, the default path is "~/Documents/Arduino/libraries/"
  • On Linux®, the default path is "Arduino IDE Path/portable/sketchbook/libraries/"
Note: Arduino IDE Path is returned by the following command in the MATLAB Command Window
arduinoio.IDERoot
For R2024a and later, across all operating systems, the library location can be determined by executing the following command:
fullfile(arduinoio.CLIRoot, 'user','libraries')
Troubleshooting tips:
  1. After installing this add-on library and the required Arduino library, type "listArduinoLibraries" in MATLAB to see if the add-on is properly installed.
  2. Wire up the Arduino board and the add-on device properly before creating the object to avoid a connection error in MATLAB.
  3. Refer to the documentation for details on usage and syntax. It can be found under Supplemental Software in the product documentation.
Feel free to contact the MATLAB Hardware Team if you have questions about this add-on library:

引用格式

MathWorks MATLAB Hardware Team (2024). 1-Wire Add-On Library for Arduino (https://www.mathworks.com/matlabcentral/fileexchange/72708-1-wire-add-on-library-for-arduino), MATLAB Central File Exchange. 检索来源 .

MATLAB 版本兼容性
创建方式 R2019b
兼容 R2019a 到 R2019b 的版本
平台兼容性
Windows macOS Linux
类别
Help CenterMATLAB Answers 中查找有关 Data Acquisition Toolbox Supported Hardware 的更多信息

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

+arduinoioaddons/+PaulStoffregen

版本 已发布 发行说明
2.4

Updated the library location for 2024a in the description.

2.3

Updated description

2.2