Automated vehicle identification using bridge vibrations

版本 1.01 (1.2 MB) 作者: E. Cheynet
Vehicle-induced vibrations of a suspension bridge are used to automatically identify the mass, speed and arrival time of the vehicles.
237.0 次下载
更新时间 2020/8/4

Automated vehicle identification using bridge vibrations

Matlab algorithm to automatically identify key vehicle characteristics from vibrations data collected on a suspension bridge

View Automated vehicle identification using bridge vibrations on File Exchange

Donation

Summary

The present code implements in Matlab the procedure used in ref [1] to automatically identify key vehicle characteristics from vibrations data collected on a suspension bridge. Nevertheless, the present numerical implementation has some minor differences with ref [1]. The bridge is modelled using a continuum model to reduce the computational cost associated with the identification of the vehicles [2,3]. Vehicles are modelled as moving-masses to reduce the computational cost. In the following, only the vertical motion of the main span is modelled. This algorithm is suited to bridges in remote areas with little traffic.

Content

The present submission contains:

  • A function eigenBridge.m that computes the modal parameters of a single-span suspension bridge.
  • A function filterMyData.m to extract the background component from the dynamic bridge response.
  • A function dynaResp_vehicle_TD.m that computes the bridge response to traffic loading (and wind loading, but this is not yet tested for wind + traffic).
  • A function findMass.m that aims to identify the mass fo the vehicles crossing the bridge.
  • A function findSpeed that aims to identify the sped fo the vehicles crossing the bridge.
  • A function findVehicleID.m that identify the number of vehicles crossing the bridge and their arrival time.
  • A function movingLoad.m that is used internally to compute the load of a moving mass on a beam.
  • A function getSamplingPara.m that is used to get the sampling frequency and time vector for the example file.
  • A function RMSE.m that simply computes the root-mean-square error.
  • A Matlab livescript Example1.mlx

References

[1] Cheynet, E., Daniotti, N., Jakobsen, J. B., & Snæbjörnsson, J. (2020). Improved long‐span bridge modeling using data‐driven identification of vehicle‐induced vibrations. Structural Control and Health Monitoring, volume 27, issue 9. https://doi.org/10.1002/stc.2574

[2] https://se.mathworks.com/matlabcentral/fileexchange/51815-calculation-of-the-modal-parameters-of-a-suspension-bridge

[3] E. Cheynet. ECheynet/EigenBridge v3.3. Zenodo, 2020, https://doi.org/10.5281/ZENODO.3817982.

Examples

Clustering and outlier analysis

Clustering and outlier analysis

identification of the vehicle speed and arrival time

Simultaneous identification of the vehicle speed and arrival time

Fitted and "measured" background bridge response

Fitted and "measured" background bridge response to the passage of vehicle

Fitted and "measured" dynamic bridge response

Fitted and "measured" dynamic bridge response

引用格式

Cheynet, Etienne, et al. “Improved Long-Span Bridge Modeling Using Data-Driven Identification of Vehicle-Induced Vibrations.” Structural Control and Health Monitoring, vol. 27, no. 9, Wiley, June 2020, doi:10.1002/stc.2574.

查看更多格式
MATLAB 版本兼容性
创建方式 R2019b
与 R2017b 及更高版本兼容
平台兼容性
Windows macOS Linux
类别
Help CenterMATLAB Answers 中查找有关 Acoustics, Noise and Vibration 的更多信息

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!
版本 已发布 发行说明
1.01

See release notes for this release on GitHub: https://github.com/ECheynet/trafficIdentification/releases/tag/v1.01

1.0

要查看或报告此来自 GitHub 的附加功能中的问题,请访问其 GitHub 仓库
要查看或报告此来自 GitHub 的附加功能中的问题,请访问其 GitHub 仓库