已回答

Data Modelling with uneven sampling frequency

plot(X1,Y1,S1,X2,Y2,S2,X3,Y3,S3,...) combines the plots defined by the (X,Y,S) triples, where the X's and Y's are vectors or ma...

Data Modelling with uneven sampling frequency

plot(X1,Y1,S1,X2,Y2,S2,X3,Y3,S3,...) combines the plots defined by the (X,Y,S) triples, where the X's and Y's are vectors or ma...

10 months 前 | 0

已回答

The output speed is not the same as the reference speed please help?

There was a bug in R2017a which was fixed in R2017b. Running the model in R2017b and higher version will give correct results.

The output speed is not the same as the reference speed please help?

There was a bug in R2017a which was fixed in R2017b. Running the model in R2017b and higher version will give correct results.

10 months 前 | 0

已回答

How to implement Built in PLL Block for Single Phase Grid Synchronisation

Simscape Electrical has an example showing how to model a rooftop single-phase grid-connected solar photovoltaic (PV) system. Th...

How to implement Built in PLL Block for Single Phase Grid Synchronisation

Simscape Electrical has an example showing how to model a rooftop single-phase grid-connected solar photovoltaic (PV) system. Th...

10 months 前 | 0

已回答

How to simulate real MOSFET in simulink ?

Probably best to use the N-Channel MOSFET in Simscape Electrical if you want to simulate the nonlinearities. This block has a hi...

How to simulate real MOSFET in simulink ?

Probably best to use the N-Channel MOSFET in Simscape Electrical if you want to simulate the nonlinearities. This block has a hi...

10 months 前 | 0

已回答

hi i have a buck pwm circuit which while im running encountering an error like initfcn call back.how to solve this issue

The function 'converter_mask' is used in the callback for ICM and zcv but is not under MATLAB path.

hi i have a buck pwm circuit which while im running encountering an error like initfcn call back.how to solve this issue

The function 'converter_mask' is used in the callback for ICM and zcv but is not under MATLAB path.

10 months 前 | 0

已回答

Is it possible to use multiple powergui blocks in a system in Matlab 2013a respective Simulink 2013a?

In MATLAB R2013a you should only use one powergui block in any given model. The option to have multiple powergui blocks was adde...

Is it possible to use multiple powergui blocks in a system in Matlab 2013a respective Simulink 2013a?

In MATLAB R2013a you should only use one powergui block in any given model. The option to have multiple powergui blocks was adde...

10 months 前 | 0

已回答

Which Solver i should use for my model ? (Three Phase inverter)

Best place to find more about how to to set up solvers for physical models is Simscape documentation: https://www.mathworks.com...

Which Solver i should use for my model ? (Three Phase inverter)

Best place to find more about how to to set up solvers for physical models is Simscape documentation: https://www.mathworks.com...

10 months 前 | 0

已回答

how can i simulate a sepic converter in matlab

A very useful resource can be downloaded from File Exchange. This workflow reference covers the design, analysis, and software d...

how can i simulate a sepic converter in matlab

A very useful resource can be downloaded from File Exchange. This workflow reference covers the design, analysis, and software d...

10 months 前 | 0

已回答

SOLVER CONFIGURATION ERROR AND Simulink-PS Converter

Check this similar question: https://www.mathworks.com/matlabcentral/answers/1614785-not-enough-input-derivatives-were-provided...

SOLVER CONFIGURATION ERROR AND Simulink-PS Converter

Check this similar question: https://www.mathworks.com/matlabcentral/answers/1614785-not-enough-input-derivatives-were-provided...

10 months 前 | 0

已回答

I need the model from the video on Maths works on "Large-Scale Wind Farm Modeling and Simulation in MATLAB and Simulink"

The model can be downloaded from File Exchange: https://www.mathworks.com/matlabcentral/fileexchange/68597-wind-farm-model-in-s...

I need the model from the video on Maths works on "Large-Scale Wind Farm Modeling and Simulation in MATLAB and Simulink"

The model can be downloaded from File Exchange: https://www.mathworks.com/matlabcentral/fileexchange/68597-wind-farm-model-in-s...

10 months 前 | 0

| 已接受

已回答

How to use more than 1 powergui in the same model?

You can use multiple powergui blocks in a system that contains two or more independent electrical circuits that you want to simu...

How to use more than 1 powergui in the same model?

You can use multiple powergui blocks in a system that contains two or more independent electrical circuits that you want to simu...

10 months 前 | 0

已回答

How do I open simPowerSystem in R2016

In MATLAB R2016a, the simPowerSystems toolbox has been renamed to Simscape Power Systems. Here's how you can open Simscape Power...

How do I open simPowerSystem in R2016

In MATLAB R2016a, the simPowerSystems toolbox has been renamed to Simscape Power Systems. Here's how you can open Simscape Power...

10 months 前 | 0

已回答

HOW CAN WE LINK MATLAB CODING TO THREE-PHASE BREAKER?

MATLAB Function blocks enable you to define custom functions in Simulink(R) models by using the MATLAB(R) language. https://www...

HOW CAN WE LINK MATLAB CODING TO THREE-PHASE BREAKER?

MATLAB Function blocks enable you to define custom functions in Simulink(R) models by using the MATLAB(R) language. https://www...

10 months 前 | 0

已回答

How to model a Solar PV in phasor domain

Phasor solution computes voltages and currents as phasors. Phasors are complex numbers representing sinusoidal voltages and curr...

How to model a Solar PV in phasor domain

Phasor solution computes voltages and currents as phasors. Phasors are complex numbers representing sinusoidal voltages and curr...

10 months 前 | 0

已回答

How can i connect a series of solar cells to make a PV module? In particular am interested on how the cells are connected to the ports i.e +, - and Ir.

Simscape Electrical provides many solar examples. A simple way to model a PV module is presented in this example: https://www.m...

How can i connect a series of solar cells to make a PV module? In particular am interested on how the cells are connected to the ports i.e +, - and Ir.

Simscape Electrical provides many solar examples. A simple way to model a PV module is presented in this example: https://www.m...

10 months 前 | 0

已回答

use of timer for simulating voltage regulator

This has been answered: https://www.mathworks.com/matlabcentral/answers/69690-error-using-timerfcn-too-many-input-arguments?s_t...

use of timer for simulating voltage regulator

This has been answered: https://www.mathworks.com/matlabcentral/answers/69690-error-using-timerfcn-too-many-input-arguments?s_t...

10 months 前 | 0

已回答

how can i design svm in simulink especially for matrix converter?

A good starting point to learn more on this topic is Simscape Electrical. There is an example that shows a three-phase matrix co...

how can i design svm in simulink especially for matrix converter?

A good starting point to learn more on this topic is Simscape Electrical. There is an example that shows a three-phase matrix co...

10 months 前 | 0

已回答

obtain a netlist with simulink

It is not possible to automatically convert a Simulink/Simscape model to a hspice netlist. How easy or difficult may be to mannu...

obtain a netlist with simulink

It is not possible to automatically convert a Simulink/Simscape model to a hspice netlist. How easy or difficult may be to mannu...

10 months 前 | 0

已回答

IMPLEMENTING HIGH FREQUENCY TRANSFORMERS IN MATLAB

Simscape Electrical provides many blocks that can be used to implement the transformer in a DC-DC converter. See for example: h...

IMPLEMENTING HIGH FREQUENCY TRANSFORMERS IN MATLAB

Simscape Electrical provides many blocks that can be used to implement the transformer in a DC-DC converter. See for example: h...

10 months 前 | 0

已回答

How to connect subsystems with different sample times in simulink

Running the system at same (fastest) rate while having different PWM switching frequency and different sampling for the control ...

How to connect subsystems with different sample times in simulink

Running the system at same (fastest) rate while having different PWM switching frequency and different sampling for the control ...

10 months 前 | 0

已回答

SPWM driven 3 phase induction motor run in reverse.

Flip vb with vc sine waves and change the sign of load mechanical torque to negative torque.

SPWM driven 3 phase induction motor run in reverse.

Flip vb with vc sine waves and change the sign of load mechanical torque to negative torque.

10 months 前 | 0

已回答

i am doing a simulation of a isolated dc dc converter. how to set the parameter of linear transformer to get required turns ratio. please help

Simscape Electrical provides a Bidirectional DC-DC Converter block which can model both an nonisolated and an isolated converter...

i am doing a simulation of a isolated dc dc converter. how to set the parameter of linear transformer to get required turns ratio. please help

Simscape Electrical provides a Bidirectional DC-DC Converter block which can model both an nonisolated and an isolated converter...

10 months 前 | 0

已回答

How can I produce a repeated stairs output signal with different switching time ?

For this kind of requirement probably a repeating sequence can work: https://www.mathworks.com/help/simulink/slref/repeatingseq...

How can I produce a repeated stairs output signal with different switching time ?

For this kind of requirement probably a repeating sequence can work: https://www.mathworks.com/help/simulink/slref/repeatingseq...

10 months 前 | 0

已回答

how to coordinate the clock bettwen simulink and matlab

It is possible to implement a MATLAB function in Simulink with a MATLAB function block: https://www.mathworks.com/help/simulink...

how to coordinate the clock bettwen simulink and matlab

It is possible to implement a MATLAB function in Simulink with a MATLAB function block: https://www.mathworks.com/help/simulink...

10 months 前 | 0

已回答

Schmitt Trigger for Matlab 2013b

Schmitt trigger was introduced in R2015a. The only option for older versions would be a custom implementation.

Schmitt Trigger for Matlab 2013b

Schmitt trigger was introduced in R2015a. The only option for older versions would be a custom implementation.

10 months 前 | 0

已回答

For running the Induction motor via Sinusoidal pulse width modulation, what type of filter I supposed to use?

There is no need to use any filter, the motor will act as a filter. PWM gate pulses are used to control the power inverter, the ...

For running the Induction motor via Sinusoidal pulse width modulation, what type of filter I supposed to use?

There is no need to use any filter, the motor will act as a filter. PWM gate pulses are used to control the power inverter, the ...

10 months 前 | 0

已回答

Adding delay to a boolean signal

If the model is running in fixed-step discrete using sample time Ts then it would not be possible to delay the signal by Ts/2. T...

Adding delay to a boolean signal

If the model is running in fixed-step discrete using sample time Ts then it would not be possible to delay the signal by Ts/2. T...

10 months 前 | 0

已回答

Variable RLC parameter block

It is possible to use Variable Resistor/Inductor/Capacitor to build your variable RLC. https://www.mathworks.com/help/simscape/...

Variable RLC parameter block

It is possible to use Variable Resistor/Inductor/Capacitor to build your variable RLC. https://www.mathworks.com/help/simscape/...

10 months 前 | 0

已回答

Switch in different Powergui

In Simscape Electrical, when you're using the Phasor simulation mode within the Powergui block, you are limited to certain compo...

Switch in different Powergui

In Simscape Electrical, when you're using the Phasor simulation mode within the Powergui block, you are limited to certain compo...

10 months 前 | 0

已回答

how do i implement direct torque control of induction motor without ac_4 block?

A good starting point for learning more about direct torque control is the documentation of Simscape Electrical: https://www.ma...

how do i implement direct torque control of induction motor without ac_4 block?

A good starting point for learning more about direct torque control is the documentation of Simscape Electrical: https://www.ma...

10 months 前 | 0