AUTOSAR Blockset Checks

Use AUTOSAR Blockset Model Advisor checks to configure your model for AUTOSAR standard compatibility.

Check ID: mathworks.autosar.autosar_configset

Check configuration settings in the model configuration that apply to AUTOSAR compatibility.

Available with AUTOSAR Blockset.

Condition	Recommended Action
One or more of the model configuration parameters are not compatible with AUTOSAR.	Set the listed configuration parameters to the recommended values. Alternatively, you can automatically set the parameters by using the Auto-Fix option.

Following are the model parameters the check examines, provided that AUTOSAR Compliance is set to on by using a proper license (TLC file).

Parameter	Recommended Values	Auto Fix	Condition Dependencies
AutoInsertRateTranBlk	off	off	STC = STIndependent && SolverMode = SingleTasking
AutosarCompliant	On	On
AutosarMaxShortNameLength	range(32,128)	128	~isAdaptiveAutosar
CombineOutputUpdateFcns	on	on
ERTFilePackagingFormat	Modular	Modular	CodeInterfacePackaging = reusable function
InlineParams	On	On	CodeInterfacePackaging = reusable function
RateTransitionBlockCode	inline	inline
SFInvalidInputDataAccessInChartInitDiag	warning error	warning
SimulationMode	normal external SIL PIL	normal
SupportComplex	off	off	~isAdaptiveAutosar
SupportContinuousTime	off	off
SupportNonFinite	off	off
SupportNonInlinedSFcns	off	off

Check ID: mathworks.autosar.lut_replacement_check

Identifies Simulink^® lookup table blocks that are incompatible with AUTOSAR Blockset Interpolation Routines.

Available with AUTOSAR Blockset.

Condition	Recommended Action
Model configuration parameter `CodeReplacementLibrary` is set to `None`.	Model configuration parameter `CodeReplacementLibrary` should not be set to `None`.

Block Type	Condition	Recommended Action
Prelookup	Parameter `ExtrapMethod` is set to `Clip`.	Consider using AUTOSAR Blockset Prelookup block for better compatibility.
n-D Lookup Table	Parameter `NumberOfTableDimensions` is set to `1` and parameter `ExtrapMethod` is set to `Clip`.	Consider using AUTOSAR Blockset Curve block for better compatibility.
n-D Lookup Table	Parameter `NumberOfTableDimensions` is set to `2` and parameter `ExtrapMethod` is set to `Clip`.	Consider using AUTOSAR Blockset Map block for better compatibility.
Interpolation Using Prelookup	Parameter `NumberOfTableDimensions` is set to `1` and parameter `ExtrapMethod` is set to `Clip`.	Consider using AUTOSAR Blockset Curve Using Prelookup block for better compatibility.
Interpolation Using Prelookup	Parameter `NumberOfTableDimensions` is set to `2` and parameter `ExtrapMethod` is set to `Clip`.	Consider using AUTOSAR Blockset Map Using Prelookup block for better compatibility.

Runs on library models.
Analyzes content of library-linked blocks. By default, the input parameter Follow links is set to on.
Analyzes content in masked subsystems. By default, the input parameter Look under masks is set to graphical.
Allows exclusions of blocks and charts.