Uniform Decoder

Description

The Uniform Decoder block performs the inverse operation of the Uniform Encoder block, and reconstructs quantized floating-point values from encoded integer input. The block adheres to the definition for uniform decoding specified in ITU-T Recommendation G.701.

Inputs can be real or complex values of the following six integer data types: uint8, uint16, uint32, int8, int16, or int32.

The block first casts the integer input values to floating-point values, and then uniquely maps (decodes) them to one of 2^B uniformly spaced floating-point values in the range [-V, (1-2^1-B)V], where you specify B in the Bits parameter (as an integer between 2 and 32) and V is a floating-point value specified by the Peak parameter. The smallest input value representable by B bits (0 for an unsigned input data type; -2^B-1 for a signed input data type) is mapped to the value -V. The largest input value representable by B bits (2^B-1 for an unsigned input data type; 2^B-1-1 for a signed input data type) is mapped to the value (1-2^1-B)V. Intermediate input values are linearly mapped to the intermediate values in the range [-V, (1-2^1-B)V].

To correctly decode values encoded by the Uniform Encoder block, the Bits and Peak parameters of the Uniform Decoder block should be set to the same values as the Bits and Peak parameters of the Uniform Encoder block. The Overflow mode parameter specifies the Uniform Decoder block's behavior when the integer input is outside the range representable by B bits. When you select Saturate, unsigned input values greater than 2^B-1 saturate at 2^B-1; signed input values greater than 2^B-1-1 or less than -2^B-1 saturate at those limits. The real and imaginary components of complex inputs saturate independently.

When you select Wrap, unsigned input values, u, greater than 2^B-1 are wrapped back into the range [0, 2^B-1] using mod-2^B arithmetic.

u = mod(u,2^B)

Signed input values, u, greater than 2^B-1-1 or less than -2^B-1 are wrapped back into that range using mod-2^B arithmetic.

u = (mod(u+2^B/2,2^B)-(2^B/2))	

The real and imaginary components of complex inputs wrap independently.

The Output type parameter specifies whether the decoded floating-point output is single or double precision. Either level of output precision can be used with any of the six integer input data types.

Parameters

References

General Aspects of Digital Transmission Systems: Vocabulary of Digital Transmission and Multiplexing, and Pulse Code Modulation (PCM) Terms, International Telecommunication Union, ITU-T Recommendation G.701, March, 1993

Supported Data Types