设置和配置
AMD SoC 设备的嵌入式目标使您能够：
编译 Simulink® 模型，该模型在 AMD SoC 设备中嵌入的 ARM® Cortex®-A 处理器上加载并运行可执行文件。
使用Supported Features for AMD SoC Devices中所述的功能和特性。
要获得此嵌入式目标，请执行安装 AMD SoC 板的支持程序中所述的步骤。
函数
zynq | Display most recent IP address, username, and password |
App
| 硬件板运行 - AMD Zynq 板 | 在连接的硬件板上编译、部署和运行模型 |
模型设置
主题
- Supported Features for AMD SoC Devices
List of supported features for AMD SoC devices.
- 安装 AMD SoC 板的支持程序
安装 AMD SoC 设备的支持程序的说明。
- TFTP/WFTPD Configuration Guide
Set up and configure Trivial File Transfer Protocol (TFTP) or Winsock File Transfer Protocol Daemon (WFTPD) to use with your hardware board.
- 硬件设置验证
描述 Embedded Coder® Support Package for AMD SoC Devices 如何验证 AMD Zynq® 板的设置。
疑难解答
Troubleshooting AMD SoC Device and Development Computer Connection
To check if the AMD SoC device is properly configured, repeat the steps in TFTP/WFTPD Configuration Guide.
在开发计算机上配置网络接口卡 (NIC) 以连接到硬件板。
Get IP Address of AMD SoC Device
You can get the IP address of the AMD SoC device from the MATLAB® Command Window or using the Linux® command line.
Command Line Session with AMD SoC Devices
Open a serial command-line session with AMD SoC devices.
Sending PING Request to AMD SoC Device
Process to PING an AMD SoC device connected to your development computer.
精选示例
Get Started with Embedded Coder Support Package for AMD SoC Devices
Generate code from a Simulink® model and run the executable on an AMD Zynq® board.
Getting Started with VxWorks 7 on AMD Zynq Boards
Generate and run code from a Simulink® model onto an AMD Zynq® ZC702 evaluation kit with a VxWorks® 7 operating system.
