Main Content

Intel FPGA Board Support from HDL Verifier

HDL Verifier™ automates the verification of HDL code on FPGA boards by providing connections between your FPGA board and your simulations in Simulink® or MATLAB®.

  • FPGA-in-the-loop (FIL) enables you to run a Simulink or MATLAB simulation that is synchronized with an HDL design running on an FPGA board.

  • FPGA data capture is a way to observe signals from your design while the design is running on the FPGA. It captures a window of signal data from the FPGA, based on your configuration and trigger settings, and returns the data to MATLAB or Simulink.

  • AXI manager provides access to live on-board memory locations from Simulink or MATLAB. You must include the AXI manager IP in your FPGA design.

To use each of these features, you must have a supported FPGA board connected to your MATLAB host computer using a supported connection type, and a supported synthesis tool.

Supported Intel FPGA Boards

This support package enables FIL simulation for the boards in the table. FPGA data capture and AXI manager are available on those boards that have JTAG USB Blaster I or USB Blaster II connections.

Device FamilyBoardEthernetJTAGPCI ExpressComments
FILFPGA Data CaptureAXI ManagerFILFPGA Data CaptureAXI ManagerFILaFPGA Data CaptureAXI Manager

Intel® Arria® II

Arria II GX FPGA Development Kit    

Intel Arria V

Arria V SoC Development Kit      
Arria V Starter Kit    

Intel Arria 10

Arria 10 SoC Development Kit     
Arria 10 GX  

Quartus® Prime 18.0 is not recommended for Arria 10 GX over PCI Express®.

Intel Agilex® 7Intel Agilex 7 FPGA I-Series Transceiver-SoC Development Kit         

Intel Cyclone® IV

Cyclone IV GX FPGA Development Kit   
DE2-115 Development and Education Board    The Altera® DE2-115 FPGA development board has two Ethernet ports. FIL uses only Ethernet 0 port. Make sure that you connect your host computer with the Ethernet 0 port on the board via an Ethernet cable.
BeMicro SDK     

Intel Cyclone III

Cyclone III FPGA Starter Kit     

Altera Cyclone III boards are supported with Quartus II 13.1

Note

Support for Cyclone III device family will be removed in a future release.

Cyclone III FPGA Development Kit    
Altera Nios II Embedded Evaluation Kit, Cyclone III Edition    

Intel Cyclone V

Cyclone V GX FPGA Development Kit    
Cyclone V SoC Development Kit       
Cyclone V GT FPGA Development Kit   
Terasic Atlas-SoC Kit / DE0-Nano SoC Kit      
Arrow® SoCKit Development Kit      

Intel Cyclone 10 LP

Altera Cyclone 10 LP Evaluation Kit

      

Intel Cyclone 10 GX

Altera Cyclone 10 GX FPGA Development Kit

    

Must be used with Quartus Prime Pro

Intel MAX® 10

Arrow MAX 10 DECA

     

Intel Stratix® IV

Stratix IV GX FPGA Development Kit    

Intel Stratix V

DSP Development Kit, Stratix V Edition   

a FIL over PCI Express connection is supported only for 64-bit Windows® operating systems.

Related Topics