Pipes and Fittings

Conduits for fluid transport and machine lubrication

Use this block to model pipe flow and resistances in the two-phase fluid domain.

Simscape Blocks

Pipe with phase-changing fluid in a two-phase fluid network

Featured Examples

Pipe Fluid Vaporization and Condensation

The 3-Zone Pipe (2P) block used to model vaporization or condensation of fluid flow in a pipe. The block divides the internal fluid volume into up to three zones: liquid zone, mixture zone, and vapor zone, depending on the state of the fluid along the pipe. As fluid flows through the pipe, heat is transferred between the environment external to the pipe and the fluid inside the pipe, causing it to change from liquid to mixture to vapor for the heating case or from vapor to mixture to liquid for the cooling case. The effect of thermal storage in the pipe wall can be optionally turned on by specifying a nonzero pipe wall thickness.

Open Model

Liquid Air Energy Storage System

Models a grid-scale energy storage system based on cryogenic liquid air. When there is excess power, the system liquefies ambient air based on a variation of the Claude cycle. The cold liquid air is stored in a low-pressure insulated tank until needed. When there is high power demand, the system expands the stored liquid air to produce power based on the Rankine cycle.

Open Model

Pipes and Fittings

Simscape Blocks

Featured Examples

Pipe Fluid Vaporization and Condensation

Liquid Air Energy Storage System

WeChat