addSurfaceRadiusTolerance

R2026b

Add tolerance for surface radius of curvature

Since R2026b

collapse all in page

    Syntax

    tolSet = addSurfaceRadiusTolerance(tolSet,value)
    tolSet = addSurfaceRadiusTolerance(tolSet,value,TargetIndex=targetIdx)

    Description

    Add-On Required: This feature requires the Optical Design and Simulation Library for Image Processing Toolbox add-on.

    tolSet = addSurfaceRadiusTolerance(tolSet,value) adds a tolerance for the radius of curvature to the tolerance set tolSet. The tolerance applies to all top-level surfaces. The tolerance set, tolSet, is an opticalToleranceSet object. This function adds a SurfaceRadiusTolerance object to the Tolerances property of tolSet and appends the details of the tolerance to the ToleranceTable property of tolSet.

    example

    tolSet = addSurfaceRadiusTolerance(tolSet,value,TargetIndex=targetIdx) applies the tolerance to only the surfaces specified by targetIdx.

    Examples

    collapse all

    This example uses:

    Open Live Script

    Import an optical system into the workspace.

    opsys = zmximport("PhotographicLens.zmx");

    Create an empty optical tolerance set.

    tolSet = opticalToleranceSet;

    Add tolerances to the tolerance set.

    tolSet = addSurfaceRadiusTolerance(tolSet,0.05);
tolSet = addSurfaceConicConstantTolerance(tolSet,[-0.01 0.01],TargetIndex=2);
tolSet = addSurfacePositionTolerance(tolSet,PositionX=0.1);
tolSet = addSurfaceTiltTolerance(tolSet,TiltX=[-0.5 0.5],TargetIndex=3);
tolSet = addSurfaceAsphericTolerance(tolSet,0.05,4);
tolSet = addComponentPositionTolerance(tolSet,PositionX=0.1);
tolSet = addComponentTiltTolerance(tolSet,TiltY=[-0.2 0.2],TargetIndex=2:8);
tolSet = addComponentMaterialTolerance(tolSet,Nd=0.05,TargetIndex=2:8);

    Inspect the tolerance set.

    tolSet
    tolSet = 
  opticalToleranceSet with properties:

        Tolerances: [1×8 optics.tolerance.Tolerance]
    ToleranceTable: [8×4 table]


    tolSet.Tolerances
    ans = 1×8 heterogeneous Tolerance (SurfaceRadiusTolerance, SurfaceConicConstantTolerance, SurfacePositionTolerance, ...) array with properties:
    ToleranceRange
    ToleranceType


    tolSet.ToleranceTable
    ans = 8×4 table
         TargetProperty     ToleranceRange    ToleranceType       TargetIndex   
         _______________    ______________    _____________    _________________

    1    "Radius"           -0.05     0.05    "Percentage"     {0×0 double     }
    2    "ConicConstant"    -0.01     0.01    "Absolute"       {[            2]}
    3    "PositionX"         -0.1      0.1    "Percentage"     {0×0 double     }
    4    "TiltX"             -0.5      0.5    "Absolute"       {[            3]}
    5    "Aspheric"         -0.05     0.05    "Percentage"     {0×0 double     }
    6    "PositionX"         -0.1      0.1    "Percentage"     {0×0 double     }
    7    "TiltY"             -0.2      0.2    "Absolute"       {[2 3 4 5 6 7 8]}
    8    "Nd"               -0.05     0.05    "Percentage"     {[2 3 4 5 6 7 8]}

	Get insights using Copilot

    Create a merit function object for evaluating system performance.

    meritFcn = opticalMeritFunction;
meritFcn = addSpot(meritFcn);

    Run a sensitivity analysis on the optical system using the merit function and tolerances.

    resultSensitivity = opticalSensitivity(opsys,meritFcn,tolSet);

    Run a Monte Carlo tolerance analysis with 100 trials on the optical system using the same merit function and tolerances.

    resultTolerance = opticalTolerance(opsys,meritFcn,tolSet,NumTrials=100);

    Input Arguments

    collapse all

    Tolerance set to which to add the tolerance, specified as an opticalToleranceSet object.

    Tolerance value, specified as a numeric scalar or a 1-by-2 numeric vector of the form [min max].

    • Scalar — Specifies a percentage tolerance relative to the nominal value. Percentage tolerances have no effect when the nominal value is zero.

    • 1-by-2 vector — Specifies an offset tolerance range [min max] relative to the nominal value.

    Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

    Surface indices to target, specified as a vector of positive integers. By default, the tolerance applies to all top-level surfaces. This function does not support tolerancing for surfaces of nested components.

    Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

    Output Arguments

    collapse all

    Updated tolerance set, returned as an opticalToleranceSet object with the surface radius tolerance appended. This function adds a SurfaceRadiusTolerance object to the Tolerances property of tolSet and appends the details of the tolerance to the ToleranceTable property of tolSet.

    Version History

    Introduced in R2026b

    See Also

    | |