Flexible Body Applications

Example models illustrating flexible body applications

Simscape™ Driveline™ allows you to model torsional and transverse flexibility in shafts. These examples demonstrate the use of the Flexible Shaft block.

Featured Examples

Flexible Shaft

Two flexible aluminum shafts modeled using a lumped parameter approach. Both shafts consist of 20 segments containing inertias, damping, and stiff torsional springs. At the start of the simulation, the clutch is unlocked and the driven shaft is free. Note that the initial velocity of the motor shaft is set to 200 rad/s and that the system starts at steady state. The clutch engages and disengages during the test, and during each event the effect of the shaft flexibility can be seen in the simulation results.

Open Model

Shaft with Torsional and Transverse Flexibility

Two flexible shafts that have torsional and transverse flexibility. One shaft computes transverse motion using computed eigenmodes, and the other shaft uses a lumped parameter approach. The boundary conditions on the shafts can be changed on the block masks.

Open Model

Flexible Body Applications

Featured Examples

Flexible Shaft

Shaft with Torsional and Transverse Flexibility

WeChat