连接的 IO 仿真
将您的 Simulink® 模型直接连接到受支持的 Arduino® 硬件以针对快速原型进行实时 I/O 数据交换。
带连接的 IO 的仿真是基于模型的设计工作流中的一个中间步骤，用于弥合仿真和代码生成之间的差距。它使 Simulink 模型能够在部署前与 Arduino 硬件通信。
主题
- Communicate with Hardware Using Connected IO
Get data from hardware peripherals before deploying the Simulink model on the hardware.
- Set Up a Wi-Fi TCP/IP Connection with Connected IO in Simulink
Establish a Wi-Fi TCP/IP connection and simulate model in the connected IO mode.
- Set Up a Wi-Fi UDP Connection with Connected IO in Simulink
Establish a Wi-Fi® UDP connection and simulate model in connected IO mode.
- Measure Servo Motor Shaft Angle Using Device Driver Block in Connected I/O
Enable Connected I/O on a Simulink System object™ block that contains hardware-specific code allowing access to hardware-specific features.
精选示例
Prepare, Configure, and Run Simulink Model for Different User Workflows on Arduino
Use the Simulink® Support Package for Arduino® Hardware to prepare, configure, and run a Simulink model for different workflows such as PIL simulation, Connected IO, Monitor and Tune External mode, real-time code profiling, and deployment.
