以编程方式分析和升级模型
R2026b此示例说明如何分析和升级您的模型，然后在自动修复可用时应用它们。
1.加载您的模型并创建一个 upgrader 对象。在此示例中，要加载并打开示例模型，请打开包含该模型的工程。
openProject("ModelReferenceHierarchy"); upgrader = upgradeadvisor("sldemo_mdlref_depgraph.slx")
upgrader =
Upgrader with properties:
ChecksToSkip: {}
SkipLibraries: 0
SkipBlocksets: 1
OneLevelOnly: 0
ShowReport: 1
VerboseLogging: 0
EnableBackups: 1
Summaries: []
RootModel: 'sldemo_mdlref_depgraph'
ReportFile: ''
Run "upgrade" on this Upgrader object to analyze and automatically upgrade your models.
2.分析模型是否适合推荐的升级、跟踪库链接和模型引用。
analyze(upgrader);
(1/-) Analyzing Model "sldemo_mdlref_depgraph" Updating Model Advisor cache... Model Advisor cache updated. For new customizations, to update the cache, use the Advisor.Manager.refresh_customizations method. (2/14) Analyzing Model "sldemo_mdlref_heat2cost" (3/14) Analyzing Model "sldemo_mdlref_house" (4/14) Analyzing Model "sldemo_mdlref_F2C" (5/14) Analyzing Model "sldemo_mdlref_outdoor_temp" (6/14) Analyzing Model "sldemo_mdlref_thermostat" (7/14) Analyzing Model "sldemo_mdlref_heater" (8/14) Analyzing Model "sldemo_mdlref_heat2cost" using compile time information (9/14) Analyzing Model "sldemo_mdlref_house" using compile time information (10/14) Analyzing Model "sldemo_mdlref_F2C" using compile time information (11/14) Analyzing Model "sldemo_mdlref_outdoor_temp" using compile time information ### Searching for referenced models in model 'sldemo_mdlref_outdoor_temp'. ### Unable to find Simulink cache file "sldemo_mdlref_F2C.slxc". ### Total of 1 models to build. ### Starting serial code generation build. ### Starting model reference code generation target build for: sldemo_mdlref_F2C ### Build reason: "sldemo_mdlref_F2C.c" did not exist. ### Build folder for generated code: /tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_F2C ### TLC front end (took 0.217s). ### Invoking Target Language Compiler on sldemo_mdlref_F2C.rtw ### Using System Target File: /mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/rtw/c/grt/grt.tlc ### Loading TLC function libraries ....... ### Initial pass through model to cache user defined code . ### Caching model source code ..................................... ### Writing header file sldemo_mdlref_F2C_types.h ### Writing header file sldemo_mdlref_F2C.h ### Writing header file rtwtypes.h . ### Writing header file multiword_types.h ### Writing source file sldemo_mdlref_F2C.c ### Writing header file sldemo_mdlref_F2C_private.h ### TLC code generation complete (took 1.876s). ### Saving binary information cache. ### Using toolchain: GNU gcc/g++ | gmake (64-bit Linux) ### Creating '/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_F2C/sldemo_mdlref_F2C.mk' ... ### Building 'sldemo_mdlref_F2C_rtwlib': "/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/bin/glnxa64/gmake" -j 4 -l 4 -f sldemo_mdlref_F2C.mk all gcc -c -fwrapv -fPIC -Wno-error=incompatible-pointer-types -Wno-error=stringop-overflow -O0 -DCLASSIC_INTERFACE=1 -DALLOCATIONFCN=0 -DMAT_FILE=0 -DONESTEPFCN=0 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=1 -DMODEL=sldemo_mdlref_F2C -DNUMST=2 -DNCSTATES=0 -DHAVESTDIO -DRT -DUSE_RTMODEL -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988 -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_F2C -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/extern/include -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/simulink/include -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/rtw/c/src -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/rtw/c/src/ext_mode/common -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/_sharedutils -o "sldemo_mdlref_F2C.o" "/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_F2C/sldemo_mdlref_F2C.c" ### Creating static library "./sldemo_mdlref_F2C_rtwlib.a" ... ar ruvs ./sldemo_mdlref_F2C_rtwlib.a sldemo_mdlref_F2C.o ar: `u' modifier ignored since `D' is the default (see `U') ar: creating ./sldemo_mdlref_F2C_rtwlib.a a - sldemo_mdlref_F2C.o ### Created: "./sldemo_mdlref_F2C_rtwlib.a" ### Successfully generated all binary outputs. gmake: Nothing to be done for `all'. ### Successfully updated the model reference code generation target for: sldemo_mdlref_F2C ### Simulink cache artifacts for 'sldemo_mdlref_F2C' were created in '/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/sldemo_mdlref_F2C.slxc'. Build Summary Model reference code generation targets: Model Build Reason Status Build Duration ============================================================================================================ sldemo_mdlref_F2C Target (sldemo_mdlref_F2C.c) did not exist. Code generated and compiled. 0h 0m 9.6364s 1 of 1 models built (0 models already up to date) Build duration: 0h 0m 11.313s ### Searching for referenced models in model 'sldemo_mdlref_outdoor_temp'. ### Total of 1 models to build. ### Starting serial model build. ### Starting model reference simulation target build for: sldemo_mdlref_F2C ### Successfully updated the model reference simulation target for: sldemo_mdlref_F2C Build Summary Model reference simulation targets: Model Build Reason Status Build Duration ===================================================================================================================== sldemo_mdlref_F2C Target (sldemo_mdlref_F2C_msf.mexa64) did not exist. Code generated and compiled. 0h 0m 8.0558s 1 of 1 models built (0 models already up to date) Build duration: 0h 0m 8.5078s ### Searching for referenced models in model 'sldemo_mdlref_outdoor_temp'. ### Total of 1 models to build. ### Model reference simulation target for sldemo_mdlref_F2C is up to date. Build Summary 0 of 1 models built (1 models already up to date) Build duration: 0h 0m 0.46942s (12/14) Analyzing Model "sldemo_mdlref_thermostat" using compile time information (13/14) Analyzing Model "sldemo_mdlref_heater" using compile time information ### Searching for referenced models in model 'sldemo_mdlref_heater'. ### Skipped unpacking from Simulink cache file "sldemo_mdlref_F2C.slxc" because the relevant build artifacts on disk are up to date. ### Unable to find Simulink cache file "sldemo_mdlref_thermostat.slxc". ### Total of 2 models to build. ### Model reference code generation target for sldemo_mdlref_F2C is up to date. ### Starting serial code generation build. ### Starting model reference code generation target build for: sldemo_mdlref_thermostat ### Build reason: "sldemo_mdlref_thermostat.c" did not exist. ### Build folder for generated code: /tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_thermostat ### Invoking Target Language Compiler on sldemo_mdlref_thermostat.rtw ### Using System Target File: /mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/rtw/c/grt/grt.tlc ### Loading TLC function libraries ....... ### Initial pass through model to cache user defined code . ### Caching model source code ...................................... ### Writing header file sldemo_mdlref_thermostat_types.h ### Writing header file sldemo_mdlref_thermostat.h ### Writing source file sldemo_mdlref_thermostat.c ### Writing header file sldemo_mdlref_thermostat_private.h ### TLC code generation complete (took 1.101s). ### Saving binary information cache. ### Using toolchain: GNU gcc/g++ | gmake (64-bit Linux) ### Creating '/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_thermostat/sldemo_mdlref_thermostat.mk' ... ### Building 'sldemo_mdlref_thermostat_rtwlib': "/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/bin/glnxa64/gmake" -j 4 -l 4 -f sldemo_mdlref_thermostat.mk all gcc -c -fwrapv -fPIC -Wno-error=incompatible-pointer-types -Wno-error=stringop-overflow -O0 -DCLASSIC_INTERFACE=1 -DALLOCATIONFCN=0 -DMAT_FILE=0 -DONESTEPFCN=0 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=1 -DMODEL=sldemo_mdlref_thermostat -DNUMST=2 -DNCSTATES=0 -DHAVESTDIO -DRT -DUSE_RTMODEL -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988 -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_thermostat -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/extern/include -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/simulink/include -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/rtw/c/src -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/rtw/c/src/ext_mode/common -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/_sharedutils -o "sldemo_mdlref_thermostat.o" "/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_thermostat/sldemo_mdlref_thermostat.c" ### Creating static library "./sldemo_mdlref_thermostat_rtwlib.a" ... ar ruvs ./sldemo_mdlref_thermostat_rtwlib.a sldemo_mdlref_thermostat.o ar: `u' modifier ignored since `D' is the default (see `U') ar: creating ./sldemo_mdlref_thermostat_rtwlib.a a - sldemo_mdlref_thermostat.o ### Created: "./sldemo_mdlref_thermostat_rtwlib.a" ### Successfully generated all binary outputs. gmake: Nothing to be done for `all'. ### Successfully updated the model reference code generation target for: sldemo_mdlref_thermostat ### Simulink cache artifacts for 'sldemo_mdlref_thermostat' were created in '/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/sldemo_mdlref_thermostat.slxc'. Build Summary Model reference code generation targets: Model Build Reason Status Build Duration ========================================================================================================================== sldemo_mdlref_thermostat Target (sldemo_mdlref_thermostat.c) did not exist. Code generated and compiled. 0h 0m 2.9352s 1 of 2 models built (1 models already up to date) Build duration: 0h 0m 3.4769s ### Searching for referenced models in model 'sldemo_mdlref_heater'. ### Total of 1 models to build. ### Starting serial model build. ### Starting model reference simulation target build for: sldemo_mdlref_thermostat ### Successfully updated the model reference simulation target for: sldemo_mdlref_thermostat Build Summary Model reference simulation targets: Model Build Reason Status Build Duration =================================================================================================================================== sldemo_mdlref_thermostat Target (sldemo_mdlref_thermostat_msf.mexa64) did not exist. Code generated and compiled. 0h 0m 4.6671s 1 of 1 models built (0 models already up to date) Build duration: 0h 0m 5.1152s ### Searching for referenced models in model 'sldemo_mdlref_heater'. ### Total of 1 models to build. ### Model reference simulation target for sldemo_mdlref_thermostat is up to date. Build Summary 0 of 1 models built (1 models already up to date) Build duration: 0h 0m 0.23916s (14/14) Analyzing Model "sldemo_mdlref_depgraph" using compile time information ### Searching for referenced models in model 'sldemo_mdlref_depgraph'. ### Skipped unpacking from Simulink cache file "sldemo_mdlref_heat2cost.slxc" because the file does not have the relevant build artifacts. ### Skipped unpacking from Simulink cache file "sldemo_mdlref_heater.slxc" because the file does not have the relevant build artifacts. ### Skipped unpacking from Simulink cache file "sldemo_mdlref_F2C.slxc" because the relevant build artifacts on disk are up to date. ### Skipped unpacking from Simulink cache file "sldemo_mdlref_thermostat.slxc" because the relevant build artifacts on disk are up to date. ### Skipped unpacking from Simulink cache file "sldemo_mdlref_house.slxc" because the file does not have the relevant build artifacts. ### Unable to find Simulink cache file "sldemo_mdlref_outdoor_temp.slxc". ### Total of 6 models to build. ### Model reference code generation target for sldemo_mdlref_F2C is up to date. ### Model reference code generation target for sldemo_mdlref_thermostat is up to date. ### Starting serial code generation build. ### Starting model reference code generation target build for: sldemo_mdlref_heat2cost ### Build reason: "sldemo_mdlref_heat2cost.c" did not exist. ### Build folder for generated code: /tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_heat2cost ### Invoking Target Language Compiler on sldemo_mdlref_heat2cost.rtw ### Using System Target File: /mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/rtw/c/grt/grt.tlc ### Loading TLC function libraries ....... ### Initial pass through model to cache user defined code . ### Caching model source code ................................................ ### Writing header file sldemo_mdlref_heat2cost_types.h ### Writing header file sldemo_mdlref_heat2cost.h ### Writing source file sldemo_mdlref_heat2cost.c ### Writing header file sldemo_mdlref_heat2cost_private.h . ### TLC code generation complete (took 1.078s). ### Saving binary information cache. ### Using toolchain: GNU gcc/g++ | gmake (64-bit Linux) ### Creating '/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_heat2cost/sldemo_mdlref_heat2cost.mk' ... ### Building 'sldemo_mdlref_heat2cost_rtwlib': "/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/bin/glnxa64/gmake" -j 4 -l 4 -f sldemo_mdlref_heat2cost.mk all gcc -c -fwrapv -fPIC -Wno-error=incompatible-pointer-types -Wno-error=stringop-overflow -O0 -DCLASSIC_INTERFACE=1 -DALLOCATIONFCN=0 -DMAT_FILE=0 -DONESTEPFCN=0 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DMODEL=sldemo_mdlref_heat2cost -DNUMST=1 -DNCSTATES=1 -DHAVESTDIO -DRT -DUSE_RTMODEL -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988 -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_heat2cost -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/extern/include -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/simulink/include -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/rtw/c/src -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/rtw/c/src/ext_mode/common -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/_sharedutils -o "sldemo_mdlref_heat2cost.o" "/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_heat2cost/sldemo_mdlref_heat2cost.c" ### Creating static library "./sldemo_mdlref_heat2cost_rtwlib.a" ... ar ruvs ./sldemo_mdlref_heat2cost_rtwlib.a sldemo_mdlref_heat2cost.o ar: `u' modifier ignored since `D' is the default (see `U') ar: creating ./sldemo_mdlref_heat2cost_rtwlib.a a - sldemo_mdlref_heat2cost.o ### Created: "./sldemo_mdlref_heat2cost_rtwlib.a" ### Successfully generated all binary outputs. gmake: Nothing to be done for `all'. ### Successfully updated the model reference code generation target for: sldemo_mdlref_heat2cost ### Starting model reference code generation target build for: sldemo_mdlref_heater ### Build reason: "sldemo_mdlref_heater.c" did not exist. ### Build folder for generated code: /tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_heater ### Invoking Target Language Compiler on sldemo_mdlref_heater.rtw ### Using System Target File: /mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/rtw/c/grt/grt.tlc ### Loading TLC function libraries ....... ### Initial pass through model to cache user defined code . ### Caching model source code ............................................ ### Writing header file sldemo_mdlref_heater_types.h ### Writing header file sldemo_mdlref_heater.h ### Writing header file model_reference_types.h . ### Writing source file sldemo_mdlref_heater.c ### Writing header file sldemo_mdlref_heater_private.h ### TLC code generation complete (took 1.094s). ### Saving binary information cache. ### Using toolchain: GNU gcc/g++ | gmake (64-bit Linux) ### Creating '/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_heater/sldemo_mdlref_heater.mk' ... ### Building 'sldemo_mdlref_heater_rtwlib': "/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/bin/glnxa64/gmake" -j 4 -l 4 -f sldemo_mdlref_heater.mk all gcc -c -fwrapv -fPIC -Wno-error=incompatible-pointer-types -Wno-error=stringop-overflow -O0 -DCLASSIC_INTERFACE=1 -DALLOCATIONFCN=0 -DMAT_FILE=0 -DONESTEPFCN=0 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=1 -DMODEL=sldemo_mdlref_heater -DNUMST=2 -DNCSTATES=0 -DHAVESTDIO -DRT -DUSE_RTMODEL -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_F2C -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_thermostat -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988 -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_heater -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/extern/include -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/simulink/include -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/rtw/c/src -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/rtw/c/src/ext_mode/common -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/_sharedutils -o "sldemo_mdlref_heater.o" "/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_heater/sldemo_mdlref_heater.c" ### Creating static library "./sldemo_mdlref_heater_rtwlib.a" ... ar ruvs ./sldemo_mdlref_heater_rtwlib.a sldemo_mdlref_heater.o ar: `u' modifier ignored since `D' is the default (see `U') ar: creating ./sldemo_mdlref_heater_rtwlib.a a - sldemo_mdlref_heater.o ### Created: "./sldemo_mdlref_heater_rtwlib.a" ### Successfully generated all binary outputs. gmake: Nothing to be done for `all'. ### Successfully updated the model reference code generation target for: sldemo_mdlref_heater ### Starting model reference code generation target build for: sldemo_mdlref_house ### Build reason: "sldemo_mdlref_house.c" did not exist. ### Build folder for generated code: /tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_house ### Invoking Target Language Compiler on sldemo_mdlref_house.rtw ### Using System Target File: /mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/rtw/c/grt/grt.tlc ### Loading TLC function libraries ....... ### Initial pass through model to cache user defined code . ### Caching model source code .................................................... ### Writing header file sldemo_mdlref_house_types.h . ### Writing header file sldemo_mdlref_house.h ### Writing source file sldemo_mdlref_house.c ### Writing header file sldemo_mdlref_house_private.h ### TLC code generation complete (took 1.031s). ### Saving binary information cache. ### Using toolchain: GNU gcc/g++ | gmake (64-bit Linux) ### Creating '/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_house/sldemo_mdlref_house.mk' ... ### Building 'sldemo_mdlref_house_rtwlib': "/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/bin/glnxa64/gmake" -j 4 -l 4 -f sldemo_mdlref_house.mk all gcc -c -fwrapv -fPIC -Wno-error=incompatible-pointer-types -Wno-error=stringop-overflow -O0 -DCLASSIC_INTERFACE=1 -DALLOCATIONFCN=0 -DMAT_FILE=0 -DONESTEPFCN=0 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DMODEL=sldemo_mdlref_house -DNUMST=1 -DNCSTATES=1 -DHAVESTDIO -DRT -DUSE_RTMODEL -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988 -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_house -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/extern/include -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/simulink/include -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/rtw/c/src -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/rtw/c/src/ext_mode/common -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/_sharedutils -o "sldemo_mdlref_house.o" "/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_house/sldemo_mdlref_house.c" ### Creating static library "./sldemo_mdlref_house_rtwlib.a" ... ar ruvs ./sldemo_mdlref_house_rtwlib.a sldemo_mdlref_house.o ar: `u' modifier ignored since `D' is the default (see `U') ar: creating ./sldemo_mdlref_house_rtwlib.a a - sldemo_mdlref_house.o ### Created: "./sldemo_mdlref_house_rtwlib.a" ### Successfully generated all binary outputs. gmake: Nothing to be done for `all'. ### Successfully updated the model reference code generation target for: sldemo_mdlref_house ### Starting model reference code generation target build for: sldemo_mdlref_outdoor_temp ### Build reason: "sldemo_mdlref_outdoor_temp.c" did not exist. ### Build folder for generated code: /tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_outdoor_temp ### Invoking Target Language Compiler on sldemo_mdlref_outdoor_temp.rtw ### Using System Target File: /mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/rtw/c/grt/grt.tlc ### Loading TLC function libraries ....... ### Initial pass through model to cache user defined code . ### Caching model source code ............................................. ### Writing header file sldemo_mdlref_outdoor_temp_types.h ### Writing header file sldemo_mdlref_outdoor_temp.h . ### Writing source file sldemo_mdlref_outdoor_temp.c ### Writing header file sldemo_mdlref_outdoor_temp_private.h ### TLC code generation complete (took 0.924s). ### Saving binary information cache. ### Using toolchain: GNU gcc/g++ | gmake (64-bit Linux) ### Creating '/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_outdoor_temp/sldemo_mdlref_outdoor_temp.mk' ... ### Building 'sldemo_mdlref_outdoor_temp_rtwlib': "/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/bin/glnxa64/gmake" -j 4 -l 4 -f sldemo_mdlref_outdoor_temp.mk all gcc -c -fwrapv -fPIC -Wno-error=incompatible-pointer-types -Wno-error=stringop-overflow -O0 -DCLASSIC_INTERFACE=1 -DALLOCATIONFCN=0 -DMAT_FILE=0 -DONESTEPFCN=0 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=1 -DMODEL=sldemo_mdlref_outdoor_temp -DNUMST=2 -DNCSTATES=0 -DHAVESTDIO -DRT -DUSE_RTMODEL -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_F2C -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988 -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_outdoor_temp -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/extern/include -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/simulink/include -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/rtw/c/src -I/mathworks/devel/bat/filer/batfs2566-0/Bdoc26b.3351752/build/runnable/matlab/rtw/c/src/ext_mode/common -I/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/_sharedutils -o "sldemo_mdlref_outdoor_temp.o" "/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/slprj/grt/sldemo_mdlref_outdoor_temp/sldemo_mdlref_outdoor_temp.c" ### Creating static library "./sldemo_mdlref_outdoor_temp_rtwlib.a" ... ar ruvs ./sldemo_mdlref_outdoor_temp_rtwlib.a sldemo_mdlref_outdoor_temp.o ar: `u' modifier ignored since `D' is the default (see `U') ar: creating ./sldemo_mdlref_outdoor_temp_rtwlib.a a - sldemo_mdlref_outdoor_temp.o ### Created: "./sldemo_mdlref_outdoor_temp_rtwlib.a" ### Successfully generated all binary outputs. gmake: Nothing to be done for `all'. ### Successfully updated the model reference code generation target for: sldemo_mdlref_outdoor_temp ### Simulink cache artifacts for 'sldemo_mdlref_heat2cost' were created in '/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/sldemo_mdlref_heat2cost.slxc'. ### Simulink cache artifacts for 'sldemo_mdlref_heater' were created in '/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/sldemo_mdlref_heater.slxc'. ### Simulink cache artifacts for 'sldemo_mdlref_house' were created in '/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/sldemo_mdlref_house.slxc'. ### Simulink cache artifacts for 'sldemo_mdlref_outdoor_temp' were created in '/tmp/Bdoc26b_3351752_2847283/tp07e64861/simulink-ex10270988/sldemo_mdlref_outdoor_temp.slxc'. Build Summary Model reference code generation targets: Model Build Reason Status Build Duration ============================================================================================================================== sldemo_mdlref_heat2cost Target (sldemo_mdlref_heat2cost.c) did not exist. Code generated and compiled. 0h 0m 3.0974s sldemo_mdlref_heater Target (sldemo_mdlref_heater.c) did not exist. Code generated and compiled. 0h 0m 3.5311s sldemo_mdlref_house Target (sldemo_mdlref_house.c) did not exist. Code generated and compiled. 0h 0m 2.5943s sldemo_mdlref_outdoor_temp Target (sldemo_mdlref_outdoor_temp.c) did not exist. Code generated and compiled. 0h 0m 2.3329s 4 of 6 models built (2 models already up to date) Build duration: 0h 0m 12.573s ### Searching for referenced models in model 'sldemo_mdlref_depgraph'. ### Total of 5 models to build. ### Model reference simulation target for sldemo_mdlref_thermostat is up to date. ### Model reference simulation target for sldemo_mdlref_F2C is up to date. ### Starting serial model build. ### Starting model reference simulation target build for: sldemo_mdlref_heat2cost ### Successfully updated the model reference simulation target for: sldemo_mdlref_heat2cost ### Starting model reference simulation target build for: sldemo_mdlref_house ### Successfully updated the model reference simulation target for: sldemo_mdlref_house ### Starting model reference simulation target build for: sldemo_mdlref_outdoor_temp ### Successfully updated the model reference simulation target for: sldemo_mdlref_outdoor_temp Build Summary Model reference simulation targets: Model Build Reason Status Build Duration ======================================================================================================================================= sldemo_mdlref_heat2cost Target (sldemo_mdlref_heat2cost_msf.mexa64) did not exist. Code generated and compiled. 0h 0m 3.7481s sldemo_mdlref_house Target (sldemo_mdlref_house_msf.mexa64) did not exist. Code generated and compiled. 0h 0m 3.416s sldemo_mdlref_outdoor_temp Target (sldemo_mdlref_outdoor_temp_msf.mexa64) did not exist. Code generated and compiled. 0h 0m 4.0985s 3 of 5 models built (2 models already up to date) Build duration: 0h 0m 11.947s ### Searching for referenced models in model 'sldemo_mdlref_depgraph'. ### Total of 5 models to build. ### Model reference simulation target for sldemo_mdlref_heat2cost is up to date. ### Model reference simulation target for sldemo_mdlref_thermostat is up to date. ### Model reference simulation target for sldemo_mdlref_house is up to date. ### Model reference simulation target for sldemo_mdlref_F2C is up to date. ### Model reference simulation target for sldemo_mdlref_outdoor_temp is up to date. Build Summary 0 of 5 models built (5 models already up to date) Build duration: 0h 0m 0.42671s
3.指定输出以找到此报告的位置。
reportLocation = upgrader.ReportFile;
4.在分析或升级模型之前配置选项。
默认情况下，
upgradeadvisor会在升级过程中为模型生成备份副本。要关闭备份文件的生成，请设置EnableBackups属性。
upgrader.EnableBackups = false;
要跳过检查，请在升级顾问中右键点击该检查，选择将检查 ID 发送到工作区，并设置
ChecksToSkip属性。
upgrader.ChecksToSkip = {"mathworks.design.SLXModelProperties"};要分析或升级当前模型，而不分析库链接、模型引用或另存为外部模型的测试框架，请启用
OneLevelOnly属性。
upgrader.OneLevelOnly = true;
要分析或升级当前模型和模型引用，但不分析或升级库链接，请启用
SkipLibraries属性。
upgrader.SkipLibraries = true;
要分析和升级模块集或工具箱中的当前模型和文件，请禁用
SkipBlocksets属性。默认情况下，升级顾问不会升级模块集或工具箱中的文件。升级顾问会从ver函数的输出中检测模块集并检测是否存在Contents文件。
upgrader.SkipBlocksets = false;
要在分析或升级模型后不显示报告，请禁用
ShowReport属性。
upgrader.ShowReport = false;
5.升级模型并在自动修复可用时应用它们。
upgrade(upgrader);
(1/2) Upgrading Model "sldemo_mdlref_depgraph" (2/2) Upgrading Model "sldemo_mdlref_depgraph" using compile time information ### Searching for referenced models in model 'sldemo_mdlref_depgraph'. ### Skipped unpacking from Simulink cache file "sldemo_mdlref_heat2cost.slxc" because the relevant build artifacts on disk are up to date. ### Skipped unpacking from Simulink cache file "sldemo_mdlref_heater.slxc" because the relevant build artifacts on disk are up to date. ### Skipped unpacking from Simulink cache file "sldemo_mdlref_F2C.slxc" because the relevant build artifacts on disk are up to date. ### Skipped unpacking from Simulink cache file "sldemo_mdlref_thermostat.slxc" because the relevant build artifacts on disk are up to date. ### Skipped unpacking from Simulink cache file "sldemo_mdlref_house.slxc" because the relevant build artifacts on disk are up to date. ### Skipped unpacking from Simulink cache file "sldemo_mdlref_outdoor_temp.slxc" because the relevant build artifacts on disk are up to date. ### Total of 6 models to build. ### Model reference code generation target for sldemo_mdlref_heat2cost is up to date. ### Model reference code generation target for sldemo_mdlref_F2C is up to date. ### Model reference code generation target for sldemo_mdlref_thermostat is up to date. ### Model reference code generation target for sldemo_mdlref_heater is up to date. ### Model reference code generation target for sldemo_mdlref_house is up to date. ### Model reference code generation target for sldemo_mdlref_outdoor_temp is up to date. Build Summary 0 of 6 models built (6 models already up to date) Build duration: 0h 0m 0.38398s ### Searching for referenced models in model 'sldemo_mdlref_depgraph'. ### Total of 5 models to build. ### Model reference simulation target for sldemo_mdlref_heat2cost is up to date. ### Model reference simulation target for sldemo_mdlref_thermostat is up to date. ### Model reference simulation target for sldemo_mdlref_house is up to date. ### Model reference simulation target for sldemo_mdlref_F2C is up to date. ### Model reference simulation target for sldemo_mdlref_outdoor_temp is up to date. Build Summary 0 of 5 models built (5 models already up to date) Build duration: 0h 0m 0.25484s ### Searching for referenced models in model 'sldemo_mdlref_depgraph'. ### Total of 5 models to build. ### Model reference simulation target for sldemo_mdlref_heat2cost is up to date. ### Model reference simulation target for sldemo_mdlref_thermostat is up to date. ### Model reference simulation target for sldemo_mdlref_house is up to date. ### Model reference simulation target for sldemo_mdlref_F2C is up to date. ### Model reference simulation target for sldemo_mdlref_outdoor_temp is up to date. Build Summary 0 of 5 models built (5 models already up to date) Build duration: 0h 0m 0.24768s
升级顾问会显示已发现问题和自动修复的列表。
升级顾问将修复保存到模型文件中。
