Operating Points in Stateflow

Save the state of your chart at a certain time in your simulation

Save an operating point to capture the state of a Simulink^® model during simulation. If your model contains a Stateflow^® chart, the operating point includes information about active states, output and local data, and persistent variables. Use an operating point to specify the initial state for a simulation and to test the response of a Stateflow chart to different settings.

Objects

`Stateflow.op.BlockOperatingPoint`	Operating point information for Stateflow chart
`Stateflow.op.OperatingPointContainer`	Operating point information for state, box, or function
`Stateflow.op.OperatingPointData`	Operating point information for chart data

Object Functions

`setActive`	Set state as active
`isActive`	Determine if state is active
`highlightActiveStates`	Highlight active states
`removeHighlighting`	Remove highlighting of active states
`getPrevActiveChild`	Get previously active substate
`setPrevActiveChild`	Set previously active substate
`clone`	Copy operating point for Stateflow chart
`open`	Display object in editing environment

Topics

Save and Restore Operating Points for Stateflow Charts
Capture, modify, and load the simulation state of your chart.
Use Operating Points to Specify Initial State of Simulation
Get the results of a continuous simulation without starting from time t = 0.
Test Difficult-to-Reproduce Chart Configurations
Test the response of a transmission system to a sudden change of gear.