Main Content

C28x GPIO Digital Output

Configure general-purpose input/output pins as digital output

expand all in page
  • C280x/C2802x/C2803x/C2805x/C2806x/C2833x/C2834x/F28M3x/F2807x/F2837xD/F2837xS/F2838x/F2838x-M4/F2800xx GPIO Digital Output block

Libraries:
C2000 Microcontroller Blockset / C2802x
C2000 Microcontroller Blockset / C2803x
C2000 Microcontroller Blockset / C2805x
C2000 Microcontroller Blockset / C2806x
C2000 Microcontroller Blockset / C280x
C2000 Microcontroller Blockset / C281x
C2000 Microcontroller Blockset / C2833x
C2000 Microcontroller Blockset / C2834x
C2000 Microcontroller Blockset / F280013x
C2000 Microcontroller Blockset / F280015x
C2000 Microcontroller Blockset / F28002x
C2000 Microcontroller Blockset / F28003x
C2000 Microcontroller Blockset / F28004x
C2000 Microcontroller Blockset / F2807x
C2000 Microcontroller Blockset / F2837xD
C2000 Microcontroller Blockset / F2837xS
C2000 Microcontroller Blockset / F2838x / C28x
C2000 Microcontroller Blockset / F2838x / M4
C2000 Microcontroller Blockset / F28M35x / C28x
C2000 Microcontroller Blockset / F28M35x / M3
C2000 Microcontroller Blockset / F28M36x / C28x
C2000 Microcontroller Blockset / F28M36x / M3
C2000 Microcontroller Blockset / F28p65x
C2000 Microcontroller Blockset / F28p55x
Simulink Support Package for Arduino Hardware / Common

Description

This block configures the general-purpose I/O (GPIO) MUX registers that control the operation of GPIO shared pins for digital input. Each I/O port has one MUX register that selects peripheral operation or digital I/O operation (the default). When a pin is configured for digital input, it becomes unavailable for digital output or peripheral operation. You can configure the Input qualification type for individual digital input pins. To configure, go to Configuration Parameters > Hardware Implementation > Target Hardware Resources and select the appropriate GPIO group.

Each processor has a different number of available GPIO pins.

Note

To avoid losing new settings, click Apply before changing the GPIO Group parameter.

Ports

Input

expand all

The input port to set the GPIO pin status.

Parameters

expand all

Select the group of GPIO pins you want to view or configure. For a table of GPIO pins and peripherals, refer to the Texas Instruments documentation for your specific target.

To configure a GPIO pin for digital output, select the check box next to it. Refer to the block for a table of all available peripherals for each pin.

A value of True at the input of the block drives the selected GPIO pin high. A value of False at the input of the block grounds the selected GPIO pin.

For each pin selected for output, you can elect to toggle the signal of that pin. In Toggle mode, a value of True at the input of the block switches the GPIO pin output level. Thus, if the GPIO pin was driven high, in Toggle mode, with the value of True at the input, the pin output level is driven low. If the GPIO pin was driven low, in Toggle mode, with the value of True at the input of the block, the same pin output level is driven high. If the input of the block is False, the GPIO pin output level is unaffected.

Note

The outputs of this block can be vectorized.

Version History

Introduced in R2016a

See Also