清空筛选条件
清空筛选条件

sir i am not getting output from this coding

3 次查看（过去 30 天）
adarsh
adarsh 2013-11-5
回答： Walter Roberson 2013-11-5
newton raphson load flow m file.
Y = ybusint(); busdata = busdata6(); linedata = linedata6(); e_intv=1.02; f_intv=.11;
Pd=busdata(:,7); Qd=busdata(:,8); E=busdata(:,3); e = real(E); f = imag(E);
Pg =busdata(:,5); Qg =busdata(:,6); fb = linedata(:,1); % From bus number... tb = linedata(:,2); % To bus number...
nb = max(max(fb),max(tb)); G = real(Y); % Conductance matrix.. B = imag(Y); % Susceptance matrix.. bsf=busdata(:,2); bpq1=busdata(2,2); bpq2=busdata(3,2); bpq=[bpq1;bpq2]; for iter = 0 : 10 e1 = midrad(mid(e_intv), eps); f1 = midrad(mid(f_intv), eps); %----- P (real power) and Q (reactive power) ----- E1 = e1 + j * f1; I1 = Y * E1; S1 = E1 .* conj(I1); P1 = real(S1); Q1 = imag(S1); E = e_intv + j * f_intv; I = Y * E; %----- POWER MISMATCHES ----- dP = -P1(bsf) + Pg(bsf) - Pd(bsf); dQ = -Q1(bpq) + Qg(bpq) - Qd(bpq); fx = [ dP; dQ ]; %----- STOP CRITERIA -----
%----- JACOBIAN MATRIX ----- for i = 1 : nb K1 = e_intv(i) * G(i, i) + f_intv(i) * B(i, i); K2 = f_intv(i) * G(i, i) - e_intv(i) * B(i, i); J1(i, i) = K1 + real(I(i)); J2(i, i) = K2 + imag(I(i)); J3(i, i) = K2 - imag(I(i)); J4(i, i) =-K1 + real(I(i)); for l = adj(i) : adj(i + 1) - 1 k = b_adj(l); J1(i, k) = e_intv(i) * G(i, k) + f_intv(i) * B(i, k); J2(i, k) = f_intv(i) * G(i, k) - e_intv(i) * B(i, k); J3(i, k) = J2(i, k); J4(i, k) = - J1(i, k); end end J = [ J1(bsf, bsf) J2(bsf, bsf) J3(bpq, bsf) J4(bpq, bsf) ]; %----- LINEAR SYSTEM - Equation (3.9) ----- delta = - J \ fx; %----- VARIABLE UPDATE ----- e_old = e_intv; f_old = f_intv; e2 = e1(bsf) + delta(1 : nb-1); %----- Equation (3.10) f2 = f1(bsf) + delta(nb : 2*nb-2); %----- Equation (3.10) e_intv(bsf) = intersect(e_old(bsf), e2); %----- Equation (3.11) f_intv(bsf) = intersect(f_old(bsf), f2); %----- Equation (3.11) end
bus data m file
function busdata = busdata6() % Returns busdata.
% |Bus | Type | Vsp | theta | PGi | QGi | PLi | QLi | Qmin | Qmax | % busdata = [ 1 1 1.05 0 .23 0 0 0 0 0 2 2 1.05 0 .34 0 0 0 -0.5 1.0 ; 3 2 1.07 0 .35 0 0 0 -0.5 1.5 ;];
line data m file
function linedata = linedata6() % Returns linedata.
% | From | To | R | X | B/2 | a % | Bus | Bus | | | | linedata = [ 1 2 0.10 0.20 0.02 1; 1 3 0.05 0.20 0.02 1; 3 2 0.08 0.30 0.03 1;];
ybus m file
% Program to for Admittance And Impedance Bus Formation....
function Y = ybusint() % Returns Y
linedata = linedata6(); % Calling Linedatas... fb = linedata(:,1); % From bus number... tb = linedata(:,2); % To bus number... r = linedata(:,3); % Resistance, R... x = linedata(:,4); % Reactance, X... b = linedata(:,5); % Ground Admittance, B/2... a = linedata(:,6); % Tap setting value.. z = r + 1i*x; % z matrix... y = 1./z; % To get inverse of each element... b = i*b; % Make B imaginary...
nb = max(max(fb),max(tb)); % No. of buses... nl = length(fb); % No. of branches... Y = zeros(nb,nb); % Initialise YBus...
% Formation of the Off Diagonal Elements...
for k = 1:nl
Y(fb(k),tb(k)) = Y(fb(k),tb(k)) - y(k)/a(k);
Y(tb(k),fb(k)) = Y(fb(k),tb(k));
end
% Formation of Diagonal Elements....
for m = 1:nb
for n = 1:nl
if fb(n) == m
Y(m,m) = Y(m,m) + y(n)/(a(n)^2) + b(n);
elseif tb(n) == m
Y(m,m) = Y(m,m) + y(n) + b(n);
end
end
end
%Y; % Bus Admittance Matrix
%Z = inv(Y); % Bus Impedance Matrix

请先登录，再回答此问题。

回答（1 个）

Walter Roberson
Walter Roberson 2013-11-5
Your load flow is not a function, and it does not appear to contain any disp() or fprintf() or other output statements. None of your other routines appear to contain any output statements. I would thus not expect there to be any output displayed when your run the file.

类别

在 Help Center 和 File Exchange 中查找有关 Statics and Dynamics 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by