simulate a variable from 0 to 255 in simulink

Question

0 个投票

I need to simulate a variable from 0 to 255. And after they return from 255 to 0 and so continuously, all in simulink. I need this to simulate a variable "pv" signal processing (level control)

thanks

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Fangjun Jiang 2011-7-2

You want the pv value increase by 1 from 0 to 255 and then come back. What is the time vector? Every 1 second change from 1 to 2, or every 1ms from 1 to 2?

请先登录，再进行评论。

请先登录，再回答此问题。

Follow Question

Answer 1

C.J. Harris 2011-7-1

0 个投票

This setup should do what you need:

Create a constant (1 for example), feed that into an integrator block, then feed that into the 'mathematical function' block (set to 'mod'), and set the second input to 255.

Increasing or decreasing the first variable will control how fast your variable counts up.

2 个评论
显示无隐藏无

Felipe Arriagada 2011-7-1

I get an error.

Warning: Using a default value of 0.2 for maximum step size. The simulation step size will be equal

to or less than this value. You can disable this diagnostic by setting 'Automatic solver parameter

selection' diagnostic to 'none' in the Diagnostics page of the configuration parameters dialog

This is the setup? http://felipedream.zobyhost.com/cunting.jpg

C.J. Harris 2011-7-4

Your image doesn't work, but all that warning is saying is that if you are using a fixed step solver your simulation time should be a multiple of your step time.

请先登录，再进行评论。

simulate a variable from 0 to 255 in simulink

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

采纳的回答

2 个评论
显示无隐藏无

更多回答（0 个）

类别

产品

标签

Community Treasure Hunt

simulate a variable from 0 to 255 in simulink

1 个评论 显示 -1更早的评论 隐藏 -1更早的评论

采纳的回答

2 个评论 显示 无 隐藏 无

更多回答（0 个）

类别

产品

标签

另请参阅

Community Treasure Hunt

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

2 个评论
显示无隐藏无