Info
此问题已关闭。 请重新打开它进行编辑或回答。
Simulink universal bridge IGBT with PWM
2 次查看(过去 30 天)
显示 更早的评论
Hi
I am using an Universal Bridge Block from the SimPowerSystems library. It is set up as an IGBT/Diodes with 3 bridge arms, and I want to control this block with a PWM signal.
First I used a PWM generator (2 level) block, also from the SimPowerSystems lib. and everything seems to work fine. But I had a task of making a PWM model myself, slightly modified in terms of the carrier wave. The build in model uses a saw tooth waveform from -1 to 1, and my model is using a saw tooth waveform from 0 to 3. Well, I managed to build this PWM block, and the output is matching the output from the build in block exactly, so it seems to be working.
Here is my confusion. When i connect the output from my own PWM block and measure the voltage on the IGBT converter, i get zero on all lines!!? This does not happen when I use the build in block, even though the output signals are exactly the same as with my block?
Does anybody have any suggestions to what is going wrong here?
0 个评论
回答(0 个)
此问题已关闭。
社区
另请参阅
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!