The below program is the Ids Vds characteristics of a DG MOSFET. and I am getting the error as Matrix dimensions must agree.. Please help me by fixing it

15 次查看（过去 30 天）
ARTI
ARTI 2014-1-7
评论： User _X 2021-12-20
if true
clear all;
hfin=1;
tsi=20
W=2*hfin*tsi;
Vth=1;
Leff=180;
DIBL=1.127*(W\Leff);
vth=Vth-DIBL;
lambda=25*10^-5;
u=1360;
ld=0.1;
Ec=1.5*106;
Cox=60;
Vds=0:0.5:10;
vgs=input('ENTER THE Vgs in volts');
m=length(Vds);
for i=1:m
if vgs < Vth
current(1,i)=0;
elseif Vds(i) >= (vgs - Vth)
current(1,i)=0.5* (vgs - Vth)^2*(1+lambda*Vds(i));
elseif Vds(i) < (vgs - Vth)
current(1,i)=((vgs-vth)*Vds(i))- 0.5*(Vds(i)^2)*(2*W*u*Cox/(Leff-ld+(Vds/Ec))+lambda*2*W*Cox/(Leff-ld)^2);
end
end
plot(Vds,current(1,:),'b')
xlabel('Vds, V')
ylabel('Drain Current,A')
title('I-V Characteristics of a MOSFET')
end
  2 个评论
ES
ES 2014-1-7
编辑：ES 2014-1-7
I think there is a small misunderstanding of the concepts.. MOSFET works in linear region for certain voltage ranges and then saturates in some other region.. So you need two equations to draw its characteristics.. That is
if Mosfet in Linear region:
use Linear region's equation.
else
use Saturation region's equation.
end
In your code you have given the equation for only the linear region..
In the previous links I had sent you in the number of threads you have opened, there were IF and ELSE logics to handle it. Please go through them. You should also add the logic in a similar way. The equations there, are different because they are different MOSFETs, but all MOSFETs basically operate the same way, as to having different regions of operations..
http://www.stallinga.org/ElectricalCharacterization/tft/index.html
ARTI
ARTI 2014-1-7
Sir, now I have added but still the same error
if true
clear all;
hfin=1;
tsi=20
W=2*hfin*tsi;
Vth=1;
Leff=180;
DIBL=1.127*(W\Leff);
vth=Vth-DIBL;
lambda=25*10^-5;
u=1360;
ld=0.1;
Ec=1.5*106;
Cox=60;
Vds=0:0.5:5;
A=3;
vgs=input('ENTER THE Vgs in volts');
Vdssat=(vgs-vth)/(1+(vgs-vth)/(Leff*Ec))
F=1-log(1+exp(A*(1-Vds/Vdssat))/log(1+exp(A)))
m=length(Vds);
for i=1:m
if vgs < Vth
current(1,i)=0;
current1(1,i)=0;
elseif Vds(i) >= (vgs - Vth)
current(1,i)=((vgs-vth)*Vds(i)-0.5*(Vds(i)^2))*(2*W*u*Cox/(Leff-ld+(Vds/Ec))+lambda*2*W*Cox/(Leff-ld)^2);
elseif Vds(i) < (vgs - Vth)
current(1,i)=((vgs-vth)*F*Vdssat(i)-0.5*F*(Vdssat(i)^2))*(2*W*u*Cox/(Leff-ld+(F*Vdssat/Ec))+lambda*2*W*Cox/(Leff-ld)^2);
end
end
plot(Vds,current(1,:),'b')
xlabel('Vds, V')
ylabel('Drain Current,A')
title('I-V Characteristics of a MOSFET')
end

请先登录，再进行评论。

请先登录，再回答此问题。

采纳的回答

ES
ES 2014-1-7
See the attached file and modified code..
clear all;
hfin=1;
tsi=20
W=2*hfin*tsi;
Vth=1;
Leff=180;
DIBL=1.127*(W\Leff);
vth=Vth-DIBL;
lambda=25*10^-5;
u=1360;
ld=0.1;
Ec=1.5*106;
Cox=60;
Vds=0:0.5:10;
vgs=input('ENTER THE Vgs in volts');
m=length(Vds);
for i=1:m
if vgs < Vth
current(1,i)=0;
current1(1,i)=0;
elseif Vds(i) >= (vgs - Vth)
current(1,i)=0.5* DIBL * ((vgs - Vth)^2)*(1+lambda*Vds(i));%Added DIBL
elseif Vds(i) < (vgs - Vth)
current(1,i)= DIBL*((vgs-Vth)*Vds(i) - 0.5*(Vds(i)^2))*(1+lambda*Vds(i)); %Simplified equation by approximation
end
end
plot(Vds,current(1,:),'b')
xlabel('Vds, V')
ylabel('Drain Current,A')
title('I-V Characteristics of a MOSFET')
  5 个评论
显示 3更早的评论
User _X
User _X 2021-12-20
I am trying to create the matlab code for the Ids - Vgs characteristics of a TG MOSFET, but I face several difficulties. Could I aks for help with this one?

请先登录，再进行评论。

更多回答（1 个）

ES
ES 2014-1-7
编辑：ES 2014-1-7
Fine that you have handled the linear and saturation region now..:) There were two small issues.. I have changed them below..
clear all;
hfin=1;
tsi=20
W=2*hfin*tsi;
Vth=1;
Leff=180;
DIBL=1.127*(W\Leff);
vth=Vth-DIBL;
lambda=25*10^-5;
u=1360;
ld=0.1;
Ec=1.5*106;
Cox=60;
Vds=0:0.5:10;
vgs=input('ENTER THE Vgs in volts');
m=length(Vds);
for i=1:m
if vgs < Vth
current(1,i)=0;
elseif Vds(i) >= (vgs - Vth)
current(1,i)=0.5* DIBL*(vgs - Vth)^2*(1+lambda*Vds(i));%Added DIBL
elseif Vds(i) < (vgs - Vth)
current(1,i)=((vgs-vth)*Vds(i))- 0.5*(Vds(i)^2)*(2*W*u*Cox/(Leff-ld+(Vds(i)/Ec))+lambda*2*W*Cox/(Leff-ld)^2);%Addedvds(i) instead of vds
end
end
plot(Vds,current(1,:),'b')
xlabel('Vds, V')
ylabel('Drain Current,A')
title('I-V Characteristics of a MOSFET')

类别

在 Help Center 和 File Exchange 中查找有关 Quantization, Projection, and Pruning 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by