The following SimPowerSystem block is not allowed with the Phasor simulation method: Block Universal Bridge Type : Universal Bridge

15 次查看（过去 30 天）

satendra kumar 2014-2-23

4
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/118238-the-following-simpowersystem-block-is-not-allowed-with-the-phasor-simulation-method-block-universal

评论： Maria Tariq 2021-5-3

Hello everyone, I am trying to simulate a model having Phasor and Discrete elements. I am getting an error as below- "The following SimPowerSystem block is not allowed with the Phasor simulation method: Block Universal Bridge Type : Universal Bridge." My objective is to Simulate the model in Phasor mode and AC to DC conversion. Please help me out.Thanks

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Pedro Rodrigues 2019-4-29

Simulation under phasor mode (in Simulink software), I realized that this type of simulation does not allow some electric element models like diodes, inverter bridge models, transistor elements (IGBT and MOSFET) - so every semiconductor elements that are not linear can not be implemented in a model in phasor mode.

请先登录，再进行评论。

请先登录，再回答此问题。

回答（2 个）

ubaidah 2017-1-11

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/118238-the-following-simpowersystem-block-is-not-allowed-with-the-phasor-simulation-method-block-universal#answer_250160

i got the same problem, Can anyone help me out for this error? My objective is to Simulate the model in Phasor mode in PV array, i used IGBT-3 level bridge, thanks

4 个评论
显示 2更早的评论隐藏 2更早的评论

Richard Bryce 2018-7-10

I have the same problem. I've found that under the block mask, there are several diode models which cause the trouble. If you create simplified diode models, you can use the phasor domain.