Using Raspberry Pi SPI interface from Simulink

Question

Rebecca Reck 2014-6-10

2
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/133458-using-raspberry-pi-spi-interface-from-simulink

回答： Jhon Ardilla 2019-9-20

Hello,

I found this example for collecting analog data with a Raspberry Pi and an MCP3008. It works great in the MATLAB command window. However, I'd love to be able to do the same thing in Simulink. I've tried using a MATLAB Function block in Simulink, however I can't seem to get it to pass the mcp3008 parameter into the function. I've made it a global variable and I've tried to use a To Workspace block and neither seem to work. It seems like a waste of resources to start and stop the connection to the Raspberry Pi on each Simulink iteration.

Does anyone have any ideas on how to make this work?

Thank you, Rebecca

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Pjer 2016-9-14

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/133458-using-raspberry-pi-spi-interface-from-simulink#answer_234677

maybe some command in s-function is not supported,so what you need id SPI-driver which read from analog signal.You may like this: SPI driver

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

Answer 2

mprice 2016-10-28

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/133458-using-raspberry-pi-spi-interface-from-simulink#answer_241176

Try using the WiringPi library, found here: WiringPi

It contains c code to access various Raspberry Pi capabilities, including SPI. You can implement it in an s-function or the s-function builder as long as you're including the right headers and have the library available in your working directory. You also want to make sure that the code is stored on the Pi itself as well, and make sure that “-lwiringPi” is included in the linker flags in the Simulink makefile.

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Alex83 2017-1-7

Hi! I also have this problem...for newbies it is hard to find a step-by-step instruction how to implement wiringpi in simulink and the rpi device. Is there a chance that you could help me with a short step-by-step tutorial imagining that there is a blank Matlab 2016 version only with RPI support package installed? What do I do next? Kind regards, Alex

请先登录，再进行评论。

Answer 3

Alex83 2017-1-7

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/133458-using-raspberry-pi-spi-interface-from-simulink#answer_249676

By the way, when I am trying to run Rebecca's example, I get always a very long error message starting with:

Error executing command "touch -c /home/pi/untitled_ert_rtw/.*;make -f untitled.mk all -C /home/pi/untitled_ert_rtw". Details:*

What do I do wrong?

2 个评论
显示无隐藏无

Fernando Lima Saraiva Filho 2017-5-5

Hello Alex83. I have the same message of error in another problem. Did you find a solution for this? Thanks in advance. Fernando.

Morteza aliyari 2017-11-24

编辑：Morteza aliyari 2017-11-24

hi,i have same problem like Alex83. i can't use any wiringPi functions on s_function in matlab 2017a simulink. i add wiringPi to rpi3b too.but error didn't change. Anyone can help?

请先登录，再进行评论。