Type 2 fuzzy logic System
25 次查看(过去 30 天)
显示 更早的评论
Twilighter
2011-8-10
where can I find the "interval type 2 fuzzy logic system" IT2FLS toolboxs.
i need to download it & start using it in my matlab the same way i use the Fuzzy logic toolbox which comes with matlab
Thanx in advance ...
14 个评论
Ramkrishna Ghosh
2020-10-4
How to download mamdai type 2 fuzzy logic .When I am downloading IT2FLS from matlab it gives sugeno type 2 fuzzy logic not mamdani type 2 fuzzy logic.
Yamini Chauhan
2021-3-7
If anyone here got the link for Mamdani type2 fuzzy logic toolbox please share.Unable to find IT2FLS Mamdani type2.
Walter Roberson
2021-3-7
I never got a reply from the author of the paper when I asked about it in 2015. https://www.mathworks.com/matlabcentral/answers/57237-how-can-i-use-it2fls-toolbox#comment_299519
halima lammari
2021-6-26
Hello
i am looking for the type-é logic toolbox with Mamdani inference, i work on Matlab2020a
help me download the toolbox (IT2-FLS Mamdani), show me steps i have to follow them
thank you so much
Walter Roberson
2021-6-26
Click on the green Code button. Choose Download Zip. Extract the zip into a convenient directory that is not part of the MATLAB distribution. Then use the MATLAB pathtool command. Navigate to the directory you just extracted into, into the type-2-fuzzy-logic-systems-matlab-toolbox-main directory and add that to your MATLAB path. Then at the MATLAB command prompt, command
fuzzyt2
halima lammari
2021-6-28
Hello sir,
I followed all your instructions but I can't open the fuzzy logic type-2 interface, that's what it shows me in the command window :
>> fuzzyt2
t2fis =
struct with fields:
name: 'Test'
type: 'sugeno'
andMethod: 'prod'
orMethod: 'probor'
defuzzMethod: 'wtaver'
impMethod: 'prod'
aggMethod: 'sum'
typeRedMethod: 'KM'
input: [1×2 struct]
output: [1×1 struct]
rule: [1×4 struct]
y =
0.1576
, I don't know what to do?
I would be very grateful thank you very much sir
Walter Roberson
2021-6-28
Yes, the code did what the authors intended. It added the fuzzyt2 routines to your MATLAB path, and then it ran an example to show that it was working.
The toolbox has no graphic interface.
There are examples provided to demonstrate its use.
halima lammari
2021-6-28
Ah! Okay !
I thought it is similar to the fuzzy logic toolbox type1 !, so it's good! I just have to follow the examples to build my program to get program (.fis), then I can run it under Simulink as type 1.
with mamfistype2 : it's for mamdani's inference.
I want to thank you very very very much very much sir
a great respect to you
rajesh pashikanti
2021-12-9
pathtool
>> fuzzyt2
Undefined function or variable 'fuzzyt2'.
Did you mean:
>> fuzzy
Walter Roberson
2023-10-18
Yes, if you install https://www.mathworks.com/matlabcentral/fileexchange/66225-interval-type-2-fuzzy-logic-system-toolbox to your MATLAB Drive.
采纳的回答
Tufan Kumbasar
2016-1-7
We're proud to introduce the research community with an open source Matlab/Simulink toolbox for Interval Type-2 Fuzzy Logic Systems (IT2-FLS) by Ahmet Taskin and Tufan Kumbasar. The current version of the IT2-FLS toolbox allows intuitive implementation of IT2-FLSs where it is capable to cover all the phases of its design. We would like to encourage the research community to contribute to the development of the IT2-FLS toolbox through suggestions, comments or contributions.
More detailed information about the toolbox and its download link can be found in:
38 个评论
Walter Roberson
2016-1-8
Thank you, Tufan Kumbasar. I have gone through the other Questions that ask about IT2FLS and have referred them to this Question.
saeede soleymani
2016-1-9
Thank you so much for share your toolbox. so nice. but how can I add it into my matlab software? the version of it is R2014a.
Walter Roberson
2016-1-9
Visit the above page. There is a download link that will allow you to download a .rar . Extract the rar into a convenient directory that is not part of the MATLAB distribution. Then use the MATLAB pathtool command. Navigate to the directory you just extracted into, down below the IT2FLSv1.0 directory to the IT2-FLS_Toolbox-v1.0 directory and add that to your MATLAB path. Then at the MATLAB command prompt, command
fuzzyt2
saeede soleymani
2016-1-9
thank's so much Mr Roberson. you help me a lot of times. you are the best.
Edidiong Eyo
2016-2-9
The toolbox only allows for three(3) membership functions per input variable. I would like to know if there is any update to the toolbox?
Tufan Kumbasar
2016-2-15
I would like to inform you that we have found the problem and have updated the toolbox. In revised version of the toolbox, you should be able to edit number and parameters of the input & output MFs.
You can find the updated version from the following link:
Thanks for your feedback,
Walter Roberson
2016-7-27
The toolbox appears to run in R2016a for me. However, for non-MS Windows systems, you need to change several statements in fuzzyt2 to use fullfile instead of concatenating strings together.
addpath(fullfile(hpath,'IT2FLSs_Toolbox_Funcs'))
addpath(fullfile(hpath,'TR_Methods_Funcs'))
addpath(fullfile(hpath,'Simulink_Lib'))
addpath(fullfile(hpath,'Images'))
Bramasto Adi Nugroho
2016-7-28
编辑:Bramasto Adi Nugroho
2016-7-28
If i double click "input" or "output", the dialog box won't show. But it's work fine at "Rule Editor". I use matlab R2016a and my OS is Windows 10 Enterprise.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/184235/image.jpeg)
Walter Roberson
2016-7-28
I see what you mean: the ButtonDownFcn of the patch is not being invoked, but it is not obvious to me why not at the moment.
Walter Roberson
2017-2-12
bahar beladi, see https://www.mathworks.com/matlabcentral/answers/13468-type-2-fuzzy-logic-system#comment_334192 above.
Walter Roberson
2018-4-25
It appears that they have placed the code on github. Visit https://github.com/ahmettaskin/type-2-fuzzy-logic-systems-matlab-toolbox . You will see a "clone or download" link on the right hand side.
Duy Nguyen
2019-7-16
hi Tufan Kumbasar,
I run the example "runEdgeDetectionExample.m" with other image size 2400x1935 and I got this error.
Index in position 2 exceeds array bounds (must not exceed 1935).
Error in runEdgeDetectionExample (line 58)
Ieval(ii,jj) = evalt2([(Ix(ii,jj));(Iy(ii,jj));]',t2fis,TRMethod);
Could you help me?
Thank you very much
Ramkrishna Ghosh
2020-10-4
From your toolbox I am getting Sugeno interval type 2 fuzzy logic not mamdani type 2 fuzzy logic.how can I get mamdani type2 fuzzy logic ?
Ramkrishna Ghosh
2020-10-5
I am not getting toolbox for mamdani type 2 fuzzy logic but getting for sugeno type 2 fuzzy logic.
Walter Roberson
2020-10-5
I am pointing out that type 2 fuzzy is now part of MATLAB, so you do not need to use the third-party toolbox.
sam hfq
2020-10-6
This IT2FLS toolbox supports only TSK system. How can I get Mamdani type-2 fuzzy system???
Walter Roberson
2020-10-6
https://www.mathworks.com/help/fuzzy/mamfistype2.html is Mamdani type-2 fuzzy system.
halima lammari
2021-6-26
Bonjour monsieur,
La boite proposé IT2-FLS contient que type Sugeno?, est ce qu'il y a possibilite d'avoir Mamdani, je ne sais pas comment executer le toolbox?
Je vous remerci infiniment monsieur
halima lammari
2021-6-26
Hello
i am looking for the type-é logic toolbox with Mamdani inference, i work on Matlab2020a
help me download the toolbox (IT2-FLS Mamdani), show me steps i have to follow them
thank you so much
Bayarassou Houria
2021-7-5
Halima lammari SVP est ce que vous avez pu savoir comment avoir Mamdani, merci d'avance.
John Kupait
2021-7-7
hi
Are there any grafical design for type 2 FLC of mamdani or its just code ?
thank you
med Max
2021-9-3
编辑:med Max
2021-9-3
hi,
The toolbox says that it support a GUI (graphical unit interface) for TSK inference and i'm looking at some pictures of the GUI for IT2 fuzzy systems? is it working and there something missing or what? could you please help me!
>> fuzzyt2
t2fis =
struct with fields:
name: 'Test'
type: 'sugeno'
andMethod: 'prod'
orMethod: 'probor'
defuzzMethod: 'wtaver'
impMethod: 'prod'
aggMethod: 'sum'
typeRedMethod: 'KM'
input: [1×2 struct]
output: [1×1 struct]
rule: [1×4 struct]
y =
0.1576
Walter Roberson
2021-9-3
The graphics component no longer appears to be part of the git download. It must have been there at some point, as I commented on an inner working of it...
med Max
2021-10-9
编辑:med Max
2021-10-9
Hello everyone;
For those who are looking for the GUI (graphical unit interface) of type-2 sugeno (TKS) inference! well, go to the usual github link: https://github.com/ahmettaskin/type-2-fuzzy-logic-systems-matlab-toolbox for the shown last version of this toolbox doesn't show the GUI but the older vesion does (stiil work) just click on #main then choose #tags and dowload the v1.0 INSTEAD of v1.1 and the graphical unit inference of type-2 fuzzy sets will open and work ^^.
Have a good day guys!
Adrián Ávila Villacís
2022-6-27
Hi, I am currently using the fuzzyt2 toolbox v1.0 because v1.1 does not run on my matlab R2021a, but when I add a second output variable I get the error can you help me?
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1046775/image.jpeg)
Walter Roberson
2022-6-27
Please show the complete error message, indicating what MATLAB thinks is wrong with the line.
Adrián Ávila Villacís
2022-6-27
编辑:Walter Roberson
2022-6-27
Matlab show this message:
Scalar structure required for this assignment.
Error in helper.setCrispInterval (line 77)
fis.output.crisp='crisp';
Error in mfEditor/plotmfs>localSelectmf (line 426)
helper.setCrispInterval('crisp'); %% Edit1
Error while evaluating Text ButtonDownFcn.
更多回答(7 个)
nadji hadroug
2017-3-28
FUZZY_TYP_2 TOOLBOOX
8 个评论
Walter Roberson
2019-4-25
I suspect there is a place where an graphics handle initialized to 0 is implicitly compared to 0, something like
if Lines(2)
as an abbreviation for
if Lines(2) ~= 0
which used to be a valid way to test whether a graphics handle had been stored into the location.
In current MATLAB, you would in this circumstance use isvalid(), such as
if isvalid(Lines(2))
Walter Roberson
2020-1-1
Please expand on what is not working with matlab 7? And could you confirm that you are using MATLAB R14 or R14SP1?
Ramkrishna Ghosh
2020-10-5
fuzzy2
Undefined function or variable 'newfis2'.
Error in fuzzy2 (line 29)
newFis=newfis2('Untitled','mamdani'); whenever running this code
Walter Roberson
2020-10-5
newfis2 is defined in 461518359T2FLToolbox/T2FLToolbox/fuzzy2/fuzzy2/fuzzy2/newfis2.m where 461518359T2FLToolbox is the name of the directory created when you unzipped the toolbox.
Chad MacDonald
2022-3-22
As of R2019b, Fuzzy Logic Toolbox software natively supports interval type-2 fuzzy systems. For more information, see:
Walter Roberson
2012-12-22
8 个评论
Walter Roberson
2015-7-22
编辑:Walter Roberson
2016-1-8
I wrote to the corresponding author of Interval Type2 Fuzzy Logic Toolbox (IT2FLS), Engineering Letters volume 15 issue 1; unfortunately I received no reply.
However, there is another toolbox called MFLS described in Toolbox for Interval Type-2 Fuzzy Logic Systems. I was able to reach the corresponding author, who cleared the code for public use. Visit his page and go down to almost the bottom, to item 15, and click on the link there that says "[Software]" in order to obtain the toolbox. I am advised that the code was written for SciLab originally and so might need some tuning to work with MATLAB.
saeede soleymani
2016-1-7
Dear Mr Roberson, I'm so glad that read this page and understand you worked in this threat.Could you help me please? I want control an inverted pendulum with interval type2 fuzzy reinforcement learning, and change it to zslices method. I simulate pendulum with simmechnics but I can't write the m file correctly.how can I use this toolbox for my work? Sicerely yours
Walter Roberson
2016-1-7
I have not worked with Fuzzy Logic myself, and I have no idea what zslices method is. All I did was searches to find the code for other people to use, because the question had been asked a number of times.
WANG XI
2019-4-4
Dear Mr Roberson. How could I run it in MATLAB?
What commands are available to run?
arpita chakraborty
2021-4-20
hi... getting this error
Error in fuzzy2 (line 52)
while findobj(0,'Type','figure','Name',figName),
Walter Roberson
2021-4-20
What are the details of the error message? What does it say is going wrong? For example is it complaining about unknown variable figName ?
rajesh pashikanti
2021-12-9
iam getting error while installing IT2 tool box-fuzzyt2-
pathtool
>> fuzzyt2
Undefined function or variable 'fuzzyt2'.
Did you mean:
>> fuzzy
BANDREDDY BABU
2017-9-6
Thank you for your research related to IT2-FLS But while designing IT2-FLS in Matlab Simulation, I am unable to add Membership functions and unable to add rules in IT2-FLS
1 个评论
sonya bahrabadi
2018-2-24
hi, I want matlab code of type-2 fuzzy logic controller design to control dc motor. Is anyone can help, Thanks Sonyabahrabadi@yahoo.com
1 个评论
Aman Kumar Singh
2018-11-10
Hi! Did you get the MATLAB model file? If yes, then could you please send it to me? Thank you! My email ID: amankumarsingh2468@gmail.com
Khothibul Umam
2021-10-9
>> fuzzyt2
t2fis =
struct with fields:
name: 'Test'
type: 'sugeno'
andMethod: 'prod'
orMethod: 'probor'
defuzzMethod: 'wtaver'
impMethod: 'prod'
aggMethod: 'sum'
typeRedMethod: 'KM'
input: [1×2 struct]
output: [1×1 struct]
rule: [1×4 struct]
y =
0.1576
I'm using the 2018b version, and a message like this appears, can you help me?
9 个评论
med Max
2021-10-9
Hi;
For those who are looking for the GUI (graphical unit interface) of type-2 sugeno (TKS) inference! well, go to the usual github link: https://github.com/ahmettaskin/type-2-fuzzy-logic-systems-matlab-toolbox for the shown last version of this toolbox doesn't show the GUI but the older vesion does (stiil work) just click on #main then choose #tags and dowload the v1.0 INSTEAD of v1.1 and the graphical unit inference of type-2 fuzzy sets will open and work ^^.
Have a good day!
Hasin
2022-8-30
Anyone can help me to remove this error for interval type 2 fuzzy logic.
fuzzyt2
Undefined function 'contains' for input arguments of type 'char'.
Error in readt2fis (line 142)
if ~contains(rangeStr,'CrispInterval')
Error in fuzzyt2 (line 26)
t2fis=readt2fis('test.t2fis'); % creates a Structure array
4 个评论
Walter Roberson
2022-8-30
Upgrade? I would imagine that contains() is not the only newer function that is used.
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Fuzzy Logic in Simulink 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!发生错误
由于页面发生更改,无法完成操作。请重新加载页面以查看其更新后的状态。
您也可以从以下列表中选择网站:
如何获得最佳网站性能
选择中国网站(中文或英文)以获得最佳网站性能。其他 MathWorks 国家/地区网站并未针对您所在位置的访问进行优化。
美洲
- América Latina (Español)
- Canada (English)
- United States (English)
欧洲
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)
亚太
- Australia (English)
- India (English)
- New Zealand (English)
- 中国
- 日本Japanese (日本語)
- 한국Korean (한국어)