Constant Input

Question

Tan Edwin 2011-2-16

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1423-constant-input

Im interested in puting an input of constant value of 1 for 5s into my simulink model, i.e at time t=0, value=1 and t=5, the value goes from 1 to 0 immediately.

Ive tried using 2 step function and also tried using the signal builder block but they did not give me the results i wanted because of the gradual decrease from 1 to 0 at the time near t=4.9 to t=5.

Is there any method or other blocks i can use to help me solve this?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Andreas Goser 2011-2-16

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1423-constant-input#answer_2081

I suppose the observation "gradual decrease" is just a misinterpretation. If you see this in the scope block, Simulink interpolates between (4.9,1) and (5.0,0), but for the simulation, there is something existing between 4.9s and 5.0s.

If you like to changes the vizualization, simply select a smaller step size. But IMHO - the technical constraints shall determine the step size, not the need for good looking.

3 个评论
显示 1更早的评论隐藏 1更早的评论

Tan Edwin 2011-2-16

I think i beginning to understand what you are trying to explain. Is it because i actually used a fixed step solver for my simulation thats why i have this kind of problem?

Kaustubha Govind 2011-2-16

Yes, it is because of using a fixed-step solver (presumably with step size 0.1) that you see this issue. Try switching to a variable-step solver if you'd like the solver to automatically take smaller steps around the discontinuity.

请先登录，再进行评论。