Why is the output of the FFT HDL Optimized block zeros in Vivado's Simulation ?

2 次查看（过去 30 天）
Youssef Abdelsalam
Youssef Abdelsalam 2021-8-19
评论： Youssef Abdelsalam 2021-8-24
I recently connected the FFT Block in Simulink to in and out ports so i can generate its HDL Code and implement it in Vivado.
After i generated it, i compiled the files in Vivado and created a block design to connect its inputs and outputs to other components of my design, but first i wanted to test if it's even working so i connected the data_in port to a simple counter and ran the simulation.
The output was unfortunately just a bunch of zeros (bit vector of 19 zeros).
Any idea why it behaves like this ?
(clk connected to clocking wizard, reset connected to "1" as a constant and so are valid_in and clk_enable also).
This screenshot is from Vivado's Block Design but this FFT IP's source is Simulinks/Matlab's generated HDL code of the FFT HDL Optimized Block.

请先登录，再回答此问题。

采纳的回答

Bharath Venkataraman
I'd first suggest that you run the generated HDL and Testbench to make sure that the HDL design is working correctly.
The next thing is to check and make sure that you are feeding in the correct data via data_in and that valid_in is staying high for the FFT length. Also, note that FFT has a latency, so the output will stay at 0s for a certain number of clock cycles after the last input of the frame is passed in.
Hope this helps.
  3 个评论
显示 1更早的评论
Bharath Venkataraman
Bharath Venkataraman 2021-8-24
I suggest that you generate an input stimulus in Simulink, pass it through the FFT subsystem to make sure that you are driving the input properly and getting the desired output. This gives you a working baseline in Simulink.
Once the above is done, you can check your Vivado design to make sure that your input in the Vivado design matches how you are driving your Simulink design.

请先登录，再进行评论。

更多回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Simulink Cosimulation 的更多信息

标签

产品


版本

R2021a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by