Hello Deepanshu,
To link a trained ANN with an optimization algorithm in MATLAB, you can use MATLAB's optimization toolbox. Let us take an example of minimizing the objective functions based on the predictions from your trained ANN.
- Load or Define Your Trained ANN: Assuming you have a trained neural network model, you should have access to it in MATLAB. If your model is saved, you can load it using the load function.
% Load your trained neural network (replace 'yourModel.mat' with your actual file)
load('yourModel.mat', 'trainedANN');
- Define the Objective Function: The objective function will use the ANN to predict outputs and calculate the fitness values.
function totalFF = objectiveFunction(inputs, trainedANN)
% Predict using the trained ANN
predictions = trainedANN(inputs');
% Extract predicted outputs
f = predictions(1:4);
RC = predictions(5:8);
B = predictions(9:12);
G = predictions(13:16);
D = predictions(17:20);
% Calculate the fitness functions
FF1 = (2.4 - f(1))^2 + (5.2 - f(2))^2 + (8.5 - f(3))^2 + (32 - f(4))^4;
FF2 = (-20 + RC(1))^2 + (-20 + RC(2))^2 + (-20 + RC(3))^2 + (-20 + RC(4))^2;
FF3 = (1.5 - B(1))^2 + (2 - B(2))^2 + (0.5 - B(3))^2 + (1.3 - B(4))^2;
FF4 = (2 - G(1))^2 + (3 - G(2))^2 + (1 - G(3))^2 + (3 - G(4))^2;
FF5 = (2 - D(1))^2 + (1.1 - D(2))^2 + (0.5 - D(3))^2 + (1.3 - D(4))^2;
% Total objective function to minimize
totalFF = FF1 + FF2 + FF3 + FF4 + FF5;
end
- Optimize Using fmincon: You can use MATLAB's fmincon function to minimize the objective function. This function is part of the Optimization Toolbox and is suitable for constrained optimization.
% Initial guess for the inputs (adjust size based on your input requirements)
initialInputs = rand(10, 1); % Example initial inputs
% Set optimization options
options = optimoptions('fmincon', 'Display', 'iter', 'Algorithm', 'sqp');
% Run optimization
[optimizedInputs, fval] = fmincon(@(inputs) objectiveFunction(inputs, trainedANN), ...
initialInputs, [], [], [], [], [], [], [], options);
% Display the optimized inputs
disp('Optimized Inputs:');
disp(optimizedInputs);
- Test and Validate: Ensure that your ANN model is correctly loaded and that the predictions are accurate. Validate the optimized inputs by checking the predicted outputs against expected results.
I hope this helps!
