Fast calculation of short cumulative product vector

1 次查看(过去 30 天)
I want to calculate a reasonable short vector many times with variable inputs a and len
%y = [a a^2 a^3...a^(len)]
My methods so far are the following:
y1 = cumprod(a(ones(len,1)))
y2 = a.^(1:len)
y1 seems to be faster than y2 for len>11 or so. Any suggestions for doing this even faster? The knowledge that y(n) = y(n-1)*y(1) should be exploitable somehow, I just dont see how.

回答(6 个)

James Tursa
James Tursa 2011-9-6
Or this variation, which I don't see in the current posts:
y = cumprod(a.*ones(1,n));
I think the MATLAB JIT may recognize this formulation and not actually do the multiply, but just populate the result ala repmat.
And if this calculation is dominating your overall runtime, you can always turn to a simple mex function to do it and avoid the imtermediate array formulations.

Oleg Komarov
Oleg Komarov 2011-9-6
time = zeros(100,3);
for len = 1:100
a = rand(1);
o = ones(1,len);
v = 1:len;
tic
for s = 1:1000; y1 = cumprod(a(o)); end
time(len,1) = toc;
tic
for s = 1:1000; y2 = a.^(v); end
time(len,2) = toc;
tic
for s = 1:1000; y3 = bsxfun(@power,a,v); end
time(len,3) = toc;
end
plot(time)
legend('cumprod','.^','bsxfun')
EDIT cumprod, power, explog, cumprodx, cumprodpow
James' cumprodpow is the fastest.
num_iter = 3000;
time = zeros(100,5);
for len = 1:100
a = rand(1);
tic
for s = 1:num_iter
y1 = cumprod(a(ones(1,len)));
end
time(len,1) = toc;
pause(0.001)
tic
for s = 1:num_iter
y2 = a.^(1:len);
end
time(len,2) = toc;
pause(0.001)
tic
for s = 1:num_iter
y3 = exp(log(a)*(1:len));
end
time(len,3) = toc;
pause(0.001)
tic
for s = 1:num_iter
y4 = cumprodx(a,len);
end
time(len,4) = toc;
pause(0.001)
tic
for s = 1:num_iter
y5 = cumprod(a.*ones(1,len));
end
time(len,5) = toc;
end
plot(time)
legend('cumprod','power','explog','cumprodx','cumprodpow')
  1 个评论
Andrei Bobrov
Andrei Bobrov 2011-9-6
Hi friends!
Firstly, +1;
secondly, small additions:
time = zeros(100,5);
for len = 1:100
a = rand(1);
o = ones(1,len);
v = 1:len;
tic
for s = 1:1000; y1 = cumprod(a(o)); end
time(len,1) = toc;
tic
for s = 1:1000; y2 = a.^(v); end
time(len,2) = toc;
tic
for s = 1:1000; y3 = bsxfun(@power,a,v); end
time(len,3) = toc;
tic
for s = 1:1000; y4 = arrayfun(@(x)a^x,v); end
time(len,4) = toc;
tic
for s = 1:1000, for v = len:-1:1, y5(v) = a^v; end; end
time(len,5) = toc;
end
plot(time)
legend('cumprod','power','bsxfun','arrayfun','for..end')

请先登录,再进行评论。


Grzegorz Knor
Grzegorz Knor 2011-9-6
My suggestion:
y3 = bsxfun(@power,a,1:len)

Derek O'Connor
Derek O'Connor 2011-9-6
Nobody has followed Knut's suggestion:
y(n) = y(n-1)*y(1)
It is in fact a special case of Horner's Method for evaluating a polynomial
yn(x) = a0 + a1*x + a2*x^2 + ... + an*x^n.
The time behavior of the two methods below is very erratic but the loop or Horner method always seems to beat the CumProd method by 30% to 50% up to about n = 150. After that, CumProd gets better and better. At n = 1000, Horner's time is about 5*CumProd time.
If you have the time try [yc,yh,time] = CumProdvsHorner(1000, 10000);
Has anyone got an explanation for the spikes in the execution times?
function [yc,yh,yx,time] = CumProdvsHorner(nmax,ns);
% Calculation of y = [a a^2 ... a^n]
% USE: [yc,yh,yx,time] = CumProdvsHorner(300,1000);
nmeths=3;
time = zeros(nmax,nmeths);
ntime = zeros(nmax,nmeths);
for n = 2:nmax
x = rand; xsave = x;
yc = zeros(1,n);
yh = zeros(1,n);
yx = zeros(1,n);
tc = tic;
for s = 1:ns
yc = cumprod(x.*ones(1,n));
end
time(n,1) = toc(tc);
tr = tic;
x = xsave;
for s = 1:ns
yh(1) = x;
for k = 2:n
yh(k) = x*yh(k-1);
end
end
time(n,2) = toc(tr);
tx = tic;
for s = 1:ns
yx = cumprodx(x,n);
end
time(n,3) = toc(tx);
end % for n
figure
plot(20:nmax,time(20:nmax,:))
legend('CumProd','Horner','CumProdx')
xlabel('n');
ylabel('Time (secs)')
title('Calculate y(x,n) = [x x^2 x^3 ... x^n]')
for m = 1:nmeths
ntime(:,m) = time(:,m)./(1:nmax)';
end
figure
plot(20:nmax,ntime(20:nmax,:))
legend('CumProd','Horner','CumProdx')
xlabel('n');
ylabel('Normalized Time T(n)/n')
title('Calculate y(x,n) = [x x^2 x^3 ... x^n]')
%
% END CumProdvsHorner
EDIT: Added plots for normalized times, renamed some variables.
  5 个评论
Derek O'Connor
Derek O'Connor 2011-9-7
@proecsm
Take a look at the normalized times with the updated function using:
[yc,yh,time] = CumProdvsHorner(1000,1000);
CumProd's behavior is very strange. As Walter says, this may be due to switching in and out of BLAS.

请先登录,再进行评论。


James Tursa
James Tursa 2011-9-7
Here is the quick and dirty mex solution:
// File cumprodx.c
// c = cumprodx(a,n) does equivalent of c = cumprod(a.*ones(1,n))
// a = real double scalar
// n = real double scalar with integral value > 0
// Caution: No argument checking
#include "mex.h"
void mexFunction(int nlhs, mxArray *plhs[], int nrhs, const mxArray *prhs[])
{
double a = mxGetScalar(prhs[0]);
mwSize i, n = mxGetScalar(prhs[1]);
double *pr;
plhs[0] = mxCreateDoubleMatrix(1,n,mxREAL);
pr = mxGetPr(plhs[0]);
pr[0] = a;
for( i=1; i<n; i++ ) {
pr[i] = pr[i-1] * a;
}
}
  3 个评论
James Tursa
James Tursa 2011-9-7
For the smaller values of n the overhead plays a significant factor as a percentage of the overall timing. The timing advantage of Horner's method in the testing isn't because it is inherently a faster method, but because it avoids the overhead of function calls. If you place Horner's method inside a function I think you will see it suddenly become one of the slowest methods. I am not knocking your previous timing tests ... they are valid and the fact that one can code a method without function calls *is* a real advantage. I am just pointing out that the timing comparison is actually being dominated by function call overhead in the small n cases.
Derek O'Connor
Derek O'Connor 2011-9-7
A good point. I had overlooked the function call overhead, which
can be a significant part of the time to do the necessary (n-1)
multiplications.
However, the timings serve as a warning not to forget the simpler,
loopy methods, especially with (an improving?) JIT compiler.
Vectorization has become something of a fetish with some Matlab
programmers, which blinds them to simpler methods.

请先登录,再进行评论。


Knut
Knut 2011-9-7
Thank you for all your help. There seems to be many different ways to accomplish this, each with different speed-tradeoffs. The mex-file might run faster with single-presicion and optimization flags, but I did not bother.
For lengths < ~80 elements, 'Horners Method' seems to be the best choice. I did notice some strange "warm-up" effects: increasing the number of iterations caused the relative performance to shift quite a lot. Is this the JIT playing games on me?
num_iter = 100;
len_span = [1:50 100:100:2000 1e4 3e4 1e5 3e5 1e6];
num_iter_span = 1e6./len_span;
time = zeros(length(len_span),7);
for len_idx = 1:length(len_span)
num_iter = num_iter_span(len_idx);
len = len_span(len_idx);
eps = 1e-7;
a = rand(1);
tic
for s = 1:num_iter;
y1 = cumprod(a*ones(1, len));
end
time(len_idx,1) = toc;
assert(max(abs(y1-y1))<eps);
tic
for s = 1:num_iter;
y2 = a.^(1:len);
end
time(len_idx,2) = toc;
assert(max(abs(y1-y2))<eps);
tic
for s = 1:num_iter;
y3 = bsxfun(@power,a,1:len);
end
time(len_idx,3) = toc;
assert(max(abs(y1-y3))<eps);
tic
for s = 1:num_iter,
for v = len:-1:1
y4(v) = a^v;
end;
end
time(len_idx,4) = toc;
assert(max(abs(y1-y4))<eps);
tic
for s = 1:num_iter,
y5(1) = a;
for v = 2:len
y5(v) = a*y5(v-1);
end;
end
time(len_idx,5) = toc;
assert(max(abs(y1-y5))<eps);
tic
for s = 1:num_iter,
y6 = cumprodx(a,len);
end
time(len_idx,6) = toc;
assert(max(abs(y1-y6))<eps);
tic
for s = 1:num_iter,
y7 = exp(log(a)*(1:len));
end
time(len_idx,7) = toc;
assert(max(abs(y1-y7))<eps);
end
figure
semilogx(len_span, time)
xlabel('vector length')
ylabel('time/vector length')
grid on
axis tight
legend('cumprod(a([1 1,...]))','power','bsxfun','for..end', 'Horners Method', 'mex', 'log')
  3 个评论
Knut
Knut 2011-9-7
Because this is similar to how I use the code in my application:
len_vect = [9 20 19 42 50];
a_vect = [0.7 0.8 0.9 1 1.1];
for t = 1:length(len_vect)
y = a_vect(t).^(1:len_vect(t));
end
As both a and len change for each iteration, it makes sense to include them within the tic and toc: I dont see how I can hide the cost of creating the vectors outside the loop?
Oleg Komarov
Oleg Komarov 2011-9-7
You didn't mention that in your original post.
Anyways, in this case I find that James' cumprod(a.*ones(1,len)) is the fastest, always.

请先登录,再进行评论。

类别

Help CenterFile Exchange 中查找有关 Debugging and Analysis 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by