Help on double integral

12 次查看（过去 30 天）
Mohamed
Mohamed 2014-8-31
评论： José Anchieta de Jesus Filho 2020-3-6
Hello Everyone,
I need your help on this problem. I am new to Matlab and still building my skills. Here is issue. I want to double integrate the following:
theta limits = [0,pi/2] phi limits = [0,2*pi]
k is a variable that ranges from N:M
function = cos(k.*sin(theta).*cos(phi))
I want to double integrate the above function with respect to theta and phi limits. I need to repeat the integration every time k change its value based on the k range above.
dblquad works if k has one value but I couldn't use it with k range. Any help would be highly appreciated.
Mohamed
  1 个评论
Mohamed
Mohamed 2014-8-31
Just to add to my question. I am using an old Matlab software Ver 6 Release 12

请先登录，再进行评论。

请先登录，再回答此问题。

回答（2 个）

Star Strider
Star Strider 2014-8-31
This works:
fun = @(k,theta,phi) cos(k.*sin(theta).*cos(phi));
kv = 5:8;
for k1 = 1:length(kv)
k = kv(k1);
ifun(k1,:) = [k dblquad(@(theta,phi) fun(k,theta,phi), 0, 2*pi, 0, 2*pi)];
end
This defines k initially as kv (here, arbitrarily from 5 to 8), then loops through every value of k. The ‘ifun’ matrix stores the value of k and the value of the integral in each row.
The quad2d function is faster than dblquad, and appears to give the same results.
  4 个评论
显示 2更早的评论
Image Analyst
Image Analyst 2014-8-31
That's not what Star's "fun" line looks like.
Star Strider
Star Strider 2014-8-31
First, if you don’t want to store k in the result, the ‘ifun’ assignment line becomes:
ifun(k1) = dblquad(@(theta,phi) fun(k,theta,phi), 0, 2*pi, 0, 2*pi);
I have no idea what that error is. I’m using anonymous functions, and that code worked perfectly for me. (If it hadn’t, I’d not have posted it.) The complete function should be entered as:
fun = @(k,theta,phi) cos(k.*sin(theta).*cos(phi));
I don’t remember when anonymous functions were introduced. If the anonymous function doesn’t work in your version, you will have to create a function file:
function val = fun(k,theta,phi)
val = cos(k.*sin(theta).*cos(phi));
end
then save it as fun.m (or rename the function to something less ambiguous and save it to the same file name as the function name).
You also may have to remove k as a function argument and substitute it manually into the function (or take the risk of declaring k as a global variable inside and outside the function for the purposes of this integration). The function file would then be:
function val = fun(theta,phi)
global k
val = cos(k.*sin(theta).*cos(phi));
end
I tested the integration with an inline function and couldn’t get it to work. If you cannot use an anonymous function, you will have to use a function file to do the integration, and a global variable for k. I don’t have access to R12, so I can’t test my code with it. Unfortunately, you will have to experiment. With luck, one of my alternative suggestions will work for you.

请先登录，再进行评论。

Mike Hosea
Mike Hosea 2014-9-26
编辑：Mike Hosea 2014-9-26
ffull = @(k,theta,phi)cos(k.*sin(theta).*cos(phi));
qscalar = @(kscalar)integral2(@(theta,phi)ffull(kscalar,theta,phi),0,pi/2,0,2*pi);
q = @(k)arrayfun(qscalar,k);
Now what do you want to do with the q function?
>> q(1:3)
ans =
8.692413142202774 5.778924787670234 2.585516200656736
or maybe plot it for k = 1:20
>> k = 1:20;
>> plot(k,q(k))
A key technical point that I've sort of glossed over here is that it is critical that you "bind" the k value by creating a function handle after a particular, scalar value of k has been selected. If you loop over the k values you need, you would create the function of just two variables, theta and phi, inside the loop. Here it was convenient to create it inside the call to INTEGRAL2. Another technical point is that because INTEGRAL2 can only calculate one value at a time, you have to use ARRAYFUN to vectorize it. You don't have to vectorize it if instead you decide to call it inside a loop over the k values.
  1 个评论
José Anchieta de Jesus Filho
José Anchieta de Jesus Filho 2020-3-6
so, I need to create a loop that calculates integrals at each point. Say I have the following function handle
D = @(x,y) x.*(Z(x,y).^2);
from that function, I need to calculate a double integral and create the following loop
int1 = @(y) integral(@(x)D(x,y),x1,x2,'ArrayValued',true);
int2 = integral(@(y)int1,y1,y2,'ArrayValued',true);
c1 = int2./g % g is a scalar number
int11 = @(y) integral(@(x)D(x,y),x2,x3,'ArrayValued',true);
int22 = integral(@(y)int11,y1,y2,'ArrayValued',true);
c11 = int22./g % g is a scalar number
int111 = @(y) integral(@(x)D(x,y),x3,x4,'ArrayValued',true);
int222 = integral(@(y)int111,y1,y2,'ArrayValued',true);
c111 = int222./g % g is a scalar number
.
.
.
i'm trying to do like this
x = 1:0.1:5
for i = 1:length(x)
D = @(x,y) x.*(Z(x,y).^2);
int1(i) = @(y) integral(@(x)D(x,y),x(i),x(i)+0.5,'ArrayValued',true);
int2(i) = integral(@(y)int1(i),y1,y2,'ArrayValued',true);
c = int2(i)./g
end
I need to plot a graph of c versus x

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Graphics Performance 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by