Permanent magnet synchronous machine initialization

Question

ALEXIS 2014-9-5

1
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/153602-permanent-magnet-synchronous-machine-initialization

评论： ALEXIS 2014-9-24

Is there any way that i can start the PMSM rotating at a starting speed when i run the model? I tried using the Machine Initialization tool in the Powergui, but it doesn't show my machine in the machine list. However, i can use this tool, if i use a synchronous or an asynchronous machine. Is there something wrong with the PMSG in simulink? Thanks.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Jan Boone 2014-9-24

2
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/153602-permanent-magnet-synchronous-machine-initialization#answer_152721

Hello Alexis,

yes you can initialize your PMSG with the block itself. You can find the parameter when double clicking on the motor then go to the parameters tab and you will find at the bottom Initial conditions.

Here you can simulate the motor when already turning.

Hope this helps you out!