Simulink Real-Time Host Scope

Question

Maximilian 2014-9-6

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/153636-simulink-real-time-host-scope

评论： Dave Hall 2021-4-12

Is there a way to add labels to the axes on the host scope?

Also is it possible to have the legend display the signal label and not the signal name?

Listing the entire path to the signal takes up too much space on the screen and without a name or axes labels the plot is essentially useless or at least incredibly hard to read.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Rajiv Ghosh-Roy 2015-5-7

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/153636-simulink-real-time-host-scope#answer_178281

You can add labels ("signal names") to the signals feeding the scope. As long as these labels are unique, they should be displayed.

You may have to go back and add the label to the source block feeding the signal; for instance, if the label is at a signal from a subsystem output, this probably will not work. You will have to add the label to the (say) Gain block feeding the subsystem output port.

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Dave Hall 2021-4-12

If the scope input has multiple signals (e.g., v1, v2, v3), is there a way to associate a label with each trace in the scope? When I lable the signal "v1, v2, v3", each trace is not surprisingly labeled "v1, v2, v3".

请先登录，再进行评论。