Low pass filter design first peak elimination
3 次查看(过去 30 天)
显示 更早的评论
Hello Everyone, I try to make a low pass operation on my data set which has 1kHz sampling rate. When I try to make fft power spectrum, I always see the first dominant peak and cannot observe the other details clearly. My advisor wants from me to use a low pass filter to eliminate this highly dominant peak of the power spectrum. I used fdatool with Fp = 800, Fs = 1600, Fsampling = 10000, Apass = 1dB, Astop = 80dB. The filter has the freq response as shown in Fig 1.
*Fig 1*
As I apply this filter to my data set, which gives the results like below in Fig 2. The green line is the original data set and the blue which has another unwanted occured peak one is the filtered data. This peak is not related with anything. It came out after filtering. Simply, I need to get rid of this with a proper filter design. Can you help me with this please ?
Fig 2
Thanks
3 个评论
Star Strider
2014-9-6
One item I noticed earlier: ‘... data set which has 1kHz sampling rate ...’ then later ‘Fsampling = 10000’.
Either there is a typographical error in your post, you omitted some information (like upsampling), or the filter your are designing is not the one you believe you are designing.
回答(1 个)
your question is very vague, need more plots and details.
0 个评论
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Multirate Signal Processing 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!