spline? interp?

2 次查看（过去 30 天）
DMGM Mazzoleni
DMGM Mazzoleni 2011-9-8
hi guys, obviously I have a problem... I have two vectors (x,y) of 30 points each one and I want to plot(x,y). THey rapresent an histeresis graph (so it's NOT a function). Doing PLOT I obtain a squared graph (with linear segments that connect these points), how can I link the points with a smooth curve? PS=remember it's not a function, so the SPLINE command doesn't work!

请先登录，再回答此问题。

回答（5 个）

Kelly Kearney
Kelly Kearney 2011-9-9
You can try interpolating both x and y parametrically. This example puts an equal number of new points between each of your old points; you can possibly get a better result if you calculate actual distance along the polygon edge for your original points.
x = [1.1781; 1.1695; 1.1665; 1.1651; 1.1667; 1.1685; 1.1700; 1.1698; 1.1672; 1.1840; 1.2166; 1.2492; 1.2839; 1.3054; 1.3202; 1.3397; 1.3563; 1.3680; 1.3685; 1.3543; 1.3363; 1.3195; 1.3017; 1.2852; 1.2637; 1.2469; 1.2358; 1.2179; 1.1995; 1.1860; 1.1744];
y = [0.6709; 0.6637; 0.6518; 0.6448; 0.6455; 0.6362; 0.6440; 0.6575; 0.6723; 0.7485; 0.7883; 0.7969; 0.7928; 0.7425; 0.7376; 0.7426; 0.7435; 0.7493; 0.7474; 0.7328; 0.7304; 0.7146; 0.6944; 0.6686; 0.6336; 0.6478; 0.6586; 0.6461; 0.6539; 0.6722; 0.6684];
x2 = interp1(0:30, x, linspace(0,30,150), 'spline');
y2 = interp1(0:30, y, linspace(0,30,150), 'spline');
x3 = interp1(0:30, x, linspace(0,30,150), 'pchip');
y3 = interp1(0:30, y, linspace(0,30,150), 'pchip');
plot(x2,y2,'-c', ...
x3,y3,'-g', ...
x,y,'bo');
John D'Errico
John D'Errico 2011-9-9
The common solution is to use a parameteric interpolant.
x=[1.1781; 1.1695; 1.1665; 1.1651; 1.1667; 1.1685; 1.1700; 1.1698; 1.1672; 1.1840; 1.2166; 1.2492; 1.2839; 1.3054; 1.3202; 1.3397; 1.3563; 1.3680; 1.3685; 1.3543; 1.3363; 1.3195; 1.3017; 1.2852; 1.2637; 1.2469; 1.2358; 1.2179; 1.1995; 1.1860; 1.1744];
y=[0.6709; 0.6637; 0.6518; 0.6448; 0.6455; 0.6362; 0.6440; 0.6575; 0.6723; 0.7485; 0.7883; 0.7969; 0.7928; 0.7425; 0.7376; 0.7426; 0.7435; 0.7493; 0.7474; 0.7328; 0.7304; 0.7146; 0.6944; 0.6686; 0.6336; 0.6478; 0.6586; 0.6461; 0.6539; 0.6722; 0.6684];
Compute a cumulative chordal arclength. This should do it:
t = cumsum(sqrt([0;diff(x)].^2 + [0;diff(y).^2]));
Now interpolate x(t) and y(t) using spline, interp1, etc.
A simple solution is to use my interparc code from the FEX, which does it all in one call, then generating equally spaced points along that smooth curve.
newxy = interparc(1000,x,y);
plot(x,y,'o')
hold on
plot(newxy(:,1),newxy(:,2),'-')
Lucas García
Lucas García 2011-9-8
Do you have the curve fitting toolbox?
If so, you can try using the functions cscvn for interpolating the spline and fnplt for plotting it.
As an example, you can try the following code:
x = -15:15;
y = x.*sin(x);
plot(x,y,'o-');
hold on
c = cscvn([x;y]);
fnplt(c,'r')
DMGM Mazzoleni
DMGM Mazzoleni 2011-9-9
No I don't have it :( ... my two vectors are:
eps=[1.1781; 1.1695; 1.1665; 1.1651; 1.1667; 1.1685; 1.1700; 1.1698; 1.1672; 1.1840; 1.2166; 1.2492; 1.2839; 1.3054; 1.3202; 1.3397; 1.3563; 1.3680; 1.3685; 1.3543; 1.3363; 1.3195; 1.3017; 1.2852; 1.2637; 1.2469; 1.2358; 1.2179; 1.1995; 1.1860; 1.1744];
mpar=[0.6709; 0.6637; 0.6518; 0.6448; 0.6455; 0.6362; 0.6440; 0.6575; 0.6723; 0.7485; 0.7883; 0.7969; 0.7928; 0.7425; 0.7376; 0.7426; 0.7435; 0.7493; 0.7474; 0.7328; 0.7304; 0.7146; 0.6944; 0.6686; 0.6336; 0.6478; 0.6586; 0.6461; 0.6539; 0.6722; 0.6684];
plot(eps,mpar,'o-')
I want to reproduce the same curve with 150 points and not with 30.
  1 个评论
John D'Errico
John D'Errico 2011-9-9
Using eps to name a variable is a terribly bad choice. Try to avoid naming a variable with an existing (and useful) matlab function.

请先登录，再进行评论。

DMGM Mazzoleni
DMGM Mazzoleni 2011-9-10
THANKS ALL OF YOU!!

类别

在 Help Center 和 File Exchange 中查找有关 Splines 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by