why i got error when executing below code what can i do
1 次查看(过去 30 天)
显示 更早的评论
% SLIC Simple Linear Iterative Clustering SuperPixels
%
% Implementation of Achanta, Shaji, Smith, Lucchi, Fua and Susstrunk's
% SLIC Superpixels
%
% Usage: [l, Am, Sp, d] = slic(im, k, m, seRadius, colopt, mw)
%
% Arguments: im - Image to be segmented.
% k - Number of desired superpixels. Note that this is nominal
% the actual number of superpixels generated will generally
% be a bit larger, espiecially if parameter m is small.
% m - Weighting factor between colour and spatial
% differences. Values from about 5 to 40 are useful. Use a
% large value to enforce superpixels with more regular and
% smoother shapes. Try a value of 10 to start with.
% seRadius - Regions morphologically smaller than this are merged with
% adjacent regions. Try a value of 1 or 1.5. Use 0 to
% disable.
% colopt - String 'mean' or 'median' indicating how the cluster
% colour centre should be computed. Defaults to 'mean'
% mw - Optional median filtering window size. Image compression
% can result in noticeable artifacts in the a*b* components
% of the image. Median filtering can reduce this. mw can be
% a single value in which case the same median filtering is
% applied to each L* a* and b* components. Alternatively it
% can be a 2-vector where mw(1) specifies the median
% filtering window to be applied to L* and mw(2) is the
% median filtering window to be applied to a* and b*.
%
% Returns: l - Labeled image of superpixels. Labels range from 1 to k.
% Am - Adjacency matrix of segments. Am(i, j) indicates whether
% segments labeled i and j are connected/adjacent
% Sp - Superpixel attribute structure array with fields:
% L - Mean L* value
% a - Mean a* value
% b - Mean b* value
% r - Mean row value
% c - Mean column value
% stdL - Standard deviation of L*
% stda - Standard deviation of a*
% stdb - Standard deviation of b*
% N - Number of pixels
% edges - List of edge numbers that bound each
% superpixel. This field is allocated, but not set,
% by SLIC. Use SPEDGES for this.
% d - Distance image giving the distance each pixel is from its
% associated superpixel centre.
%
% It is suggested that use of this function is followed by SPDBSCAN to perform a
% DBSCAN clustering of superpixels. This results in a simple and fast
% segmentation of an image.
%
% Minor variations from the original algorithm as defined in Achanta et al's
% paper:
%
% - SuperPixel centres are initialised on a hexagonal grid rather than a square
% one. This results in a segmentation that will be nominally 6-connected
% which hopefully facilitates any subsequent post-processing that seeks to
% merge superpixels.
% - Initial cluster positions are not shifted to point of lowest gradient
% within a 3x3 neighbourhood because this will be rendered irrelevant the
% first time cluster centres are updated.
%
% Reference: R. Achanta, A. Shaji, K. Smith, A. Lucchi, P. Fua and
% S. Susstrunk. "SLIC Superpixels Compared to State-of-the-Art Superpixel
% Methods" PAMI. Vol 34 No 11. November 2012. pp 2274-2281.
%
% See also: SPDBSCAN, MCLEANUPREGIONS, REGIONADJACENCY, DRAWREGIONBOUNDARIES, RGB2LAB
% Copyright (c) 2013 Peter Kovesi
% Centre for Exploration Targeting
% School of Earth and Environment
% The University of Western Australia
% peter.kovesi at uwa edu au
%
% Permission is hereby granted, free of charge, to any person obtaining a copy
% of this software and associated documentation files (the "Software"), to deal
% in the Software without restriction, subject to the following conditions:
%
% The above copyright notice and this permission notice shall be included in
% all copies or substantial portions of the Software.
%
% The Software is provided "as is", without warranty of any kind.
% Feb 2013
% July 2013 Super pixel attributes returned as a structure array
%
% Note that most of the computation time is not in the clustering, but rather
% in the region cleanup process.
clc;
clear all;
close all;
im=imread('E:\project details wg\project\coding1\converted\ZX.jpg')
function [l, Am, Sp, d] = slic(im, k, m, seRadius, colopt, mw, nItr, eim, We)
if ~exist('colopt','var') || isempty(colopt), colopt = 'mean'; end
if ~exist('mw','var') || isempty(mw), mw = 0; end
if ~exist('nItr','var') || isempty(nItr), nItr = 10; end
if exist('eim', 'var'), USEDIST = 0; else, USEDIST = 1; end
MEANCENTRE = 1;
MEDIANCENTRE = 2;
if strcmp(colopt, 'mean')
centre = MEANCENTRE;
elseif strcmp(colopt, 'median')
centre = MEDIANCENTRE;
else
error('Invalid colour centre computation option');
end
[rows, cols, chan] = size(im);
if chan ~= 3
error('Image must be colour');
end
% Convert image to L*a*b* colourspace. This gives us a colourspace that is
% nominally perceptually uniform. This allows us to use the euclidean
% distance between colour coordinates to measure differences between
% colours. Note the image becomes double after conversion. We may want to
% go to signed shorts to save memory.
im = rgb2lab(im);
% Apply median filtering to colour components if mw has been supplied
% and/or non-zero
if mw
if length(mw) == 1
mw(2) = mw(1); % Use same filtering for L and chrominance
end
for n = 1:3
im(:,:,n) = medfilt2(im(:,:,n), [mw(1) mw(1)]);
end
end
% Nominal spacing between grid elements assuming hexagonal grid
S = sqrt(rows*cols / (k * sqrt(3)/2));
% Get nodes per row allowing a half column margin at one end that alternates
% from row to row
nodeCols = round(cols/S - 0.5);
% Given an integer number of nodes per row recompute S
S = cols/(nodeCols + 0.5);
% Get number of rows of nodes allowing 0.5 row margin top and bottom
nodeRows = round(rows/(sqrt(3)/2*S));
vSpacing = rows/nodeRows;
% Recompute k
k = nodeRows * nodeCols;
% Allocate memory and initialise clusters, labels and distances.
C = zeros(6,k); % Cluster centre data 1:3 is mean Lab value,
% 4:5 is row, col of centre, 6 is No of pixels
l = -ones(rows, cols); % Pixel labels.
d = inf(rows, cols); % Pixel distances from cluster centres.
% Initialise clusters on a hexagonal grid
kk = 1;
r = vSpacing/2;
for ri = 1:nodeRows
% Following code alternates the starting column for each row of grid
% points to obtain a hexagonal pattern. Note S and vSpacing are kept
% as doubles to prevent errors accumulating across the grid.
if mod(ri,2), c = S/2; else, c = S; end
for ci = 1:nodeCols
cc = round(c); rr = round(r);
C(1:5, kk) = [squeeze(im(rr,cc,:)); cc; rr];
c = c+S;
kk = kk+1;
end
r = r+vSpacing;
end
% Now perform the clustering. 10 iterations is suggested but I suspect n
% could be as small as 2 or even 1
S = round(S); % We need S to be an integer from now on
for n = 1:nItr
for kk = 1:k % for each cluster
% Get subimage around cluster
rmin = max(C(5,kk)-S, 1); rmax = min(C(5,kk)+S, rows);
cmin = max(C(4,kk)-S, 1); cmax = min(C(4,kk)+S, cols);
subim = im(rmin:rmax, cmin:cmax, :);
assert(numel(subim) > 0)
% Compute distances D between C(:,kk) and subimage
if USEDIST
D = dist(C(:, kk), subim, rmin, cmin, S, m);
else
D = dist2(C(:, kk), subim, rmin, cmin, S, m, eim, We);
end
% If any pixel distance from the cluster centre is less than its
% previous value update its distance and label
subd = d(rmin:rmax, cmin:cmax);
subl = l(rmin:rmax, cmin:cmax);
updateMask = D < subd;
subd(updateMask) = D(updateMask);
subl(updateMask) = kk;
d(rmin:rmax, cmin:cmax) = subd;
l(rmin:rmax, cmin:cmax) = subl;
end
% Update cluster centres with mean values
C(:) = 0;
for r = 1:rows
for c = 1:cols
tmp = [im(r,c,1); im(r,c,2); im(r,c,3); c; r; 1];
C(:, l(r,c)) = C(:, l(r,c)) + tmp;
end
end
% Divide by number of pixels in each superpixel to get mean values
for kk = 1:k
C(1:5,kk) = round(C(1:5,kk)/C(6,kk));
end
% Note the residual error, E, is not calculated because we are using a
% fixed number of iterations
end
% Cleanup small orphaned regions and 'spurs' on each region using
% morphological opening on each labeled region. The cleaned up regions are
% assigned to the nearest cluster. The regions are renumbered and the
% adjacency matrix regenerated. This is needed because the cleanup is
% likely to change the number of labeled regions.
[l, Am] = mcleanupregions(l, seRadius);
% Recompute the final superpixel attributes and write information into
% the Sp struct array.
N = length(Am);
Sp = struct('L', cell(1,N), 'a', cell(1,N), 'b', cell(1,N), ...
'stdL', cell(1,N), 'stda', cell(1,N), 'stdb', cell(1,N), ...
'r', cell(1,N), 'c', cell(1,N), 'N', cell(1,N));
[X,Y] = meshgrid(1:cols, 1:rows);
L = im(:,:,1);
A = im(:,:,2);
B = im(:,:,3);
for n = 1:N
mask = l==n;
nm = sum(mask(:));
if centre == MEANCENTRE
Sp(n).L = sum(L(mask))/nm;
Sp(n).a = sum(A(mask))/nm;
Sp(n).b = sum(B(mask))/nm;
elseif centre == MEDIANCENTRE
Sp(n).L = median(L(mask));
Sp(n).a = median(A(mask));
Sp(n).b = median(B(mask));
end
Sp(n).r = sum(Y(mask))/nm;
Sp(n).c = sum(X(mask))/nm;
% Compute standard deviations of the colour components of each super
% pixel. This can be used by code seeking to merge superpixels into
% image segments. Note these are calculated relative to the mean colour
% component irrespective of the centre being calculated from the mean or
% median colour component values.
Sp(n).stdL = std(L(mask));
Sp(n).stda = std(A(mask));
Sp(n).stdb = std(B(mask));
Sp(n).N = nm; % Record number of pixels in superpixel too.
end
%-- dist -------------------------------------------
%
% Usage: D = dist(C, im, r1, c1, S, m)
%
% Arguments: C - Cluster being considered
% im - sub-image surrounding cluster centre
% r1, c1 - row and column of top left corner of sub image within the
% overall image.
% S - grid spacing
% m - weighting factor between colour and spatial differences.
%
% Returns: D - Distance image giving distance of every pixel in the
% subimage from the cluster centre
%
% Distance = sqrt( dc^2 + (ds/S)^2*m^2 )
% where:
% dc = sqrt(dl^2 + da^2 + db^2) % Colour distance
% ds = sqrt(dx^2 + dy^2) % Spatial distance
%
% m is a weighting factor representing the nominal maximum colour distance
% expected so that one can rank colour similarity relative to distance
% similarity. try m in the range [1-40] for L*a*b* space
%
% ?? Might be worth trying the Geometric Mean instead ??
% Distance = sqrt(dc * ds)
% but having a factor 'm' to play with is probably handy
% This code could be more efficient
function D = dist(C, im, r1, c1, S, m)
% Squared spatial distance
% ds is a fixed 'image' we should be able to exploit this
% and use a fixed meshgrid for much of the time somehow...
[rows, cols, chan] = size(im);
[x,y] = meshgrid(c1:(c1+cols-1), r1:(r1+rows-1));
x = x-C(4); % x and y dist from cluster centre
y = y-C(5);
ds2 = x.^2 + y.^2;
% Squared colour difference
for n = 1:3
im(:,:,n) = (im(:,:,n)-C(n)).^2;
end
dc2 = sum(im,3);
D = sqrt(dc2 + ds2/S^2*m^2);
%--- dist2 ------------------------------------------
%
% Usage: D = dist2(C, im, r1, c1, S, m, eim)
%
% Arguments: C - Cluster being considered
% im - sub-image surrounding cluster centre
% r1, c1 - row and column of top left corner of sub image within the
% overall image.
% S - grid spacing
% m - weighting factor between colour and spatial differences.
% eim - Edge strength sub-image corresponding to im
%
% Returns: D - Distance image giving distance of every pixel in the
% subimage from the cluster centre
%
% Distance = sqrt( dc^2 + (ds/S)^2*m^2 )
% where:
% dc = sqrt(dl^2 + da^2 + db^2) % Colour distance
% ds = sqrt(dx^2 + dy^2) % Spatial distance
%
% m is a weighting factor representing the nominal maximum colour distance
% expected so that one can rank colour similarity relative to distance
% similarity. try m in the range [1-40] for L*a*b* space
%
function D = dist2(C, im, r1, c1, S, m, eim, We)
% Squared spatial distance
% ds is a fixed 'image' we should be able to exploit this
% and use a fixed meshgrid for much of the time somehow...
[rows, cols, chan] = size(im);
[x,y] = meshgrid(c1:(c1+cols-1), r1:(r1+rows-1));
x = x-C(4);
y = y-C(5);
ds2 = x.^2 + y.^2;
% Squared colour difference
for n = 1:3
im(:,:,n) = (im(:,:,n)-C(n)).^2;
end
dc2 = sum(im,3);
% Combine colour and spatial distance measure
D = sqrt(dc2 + ds2/S^2*m^2);
% for every pixel in the subimage call improfile to the cluster centre
% and use the largest value as the 'edge distance'
rCentre = C(5)-r1; % Cluster centre coords relative to this sub-image
cCentre = C(4)-c1;
de = zeros(rows,cols);
for r = 1:rows
for c = 1:cols
v = improfile(eim,[c cCentre], [r rCentre]);
de(r,c) = max(v);
end
end
% Combine edge distance with weight, We with total Distance.
D = D + We * de;
0 个评论
采纳的回答
Image Analyst
2014-9-26
If all that is in one m-file, then you'll need to add the name of your m-file at the beginning after the word function so that you have two functions in the file, not a script and a function.
function slic_test
Then read in your image and assign values for k, m, seRadius, colopt, and mw. Then you can call slic(). Make sure you have the other ancillary dependent routines that it may need like rgb2lab as Geoff mentioned.
OR, you can have your test script in one m-file and the slic function in a separate m-file called slic.m, so you have two separate m-files, one is a script and one is a function. Of course you still need to assign values to all the input arguments.
5 个评论
Geoff Hayes
2014-9-27
编辑:Geoff Hayes
2014-9-27
Try the following - use the attached slic.m (which is identical to yours except there is no im=... as the first line) and execute the following in the Command Window
im = imread('E:\project details wg\project\coding1\converted\ZX.jpg');
[l, Am, Sp, d] = slic(im,100,5,1);
If you open the attached file, you will notice that the first line that does not contain comments is the function signature
function [l, Am, Sp, d] = slic(im, k, m, seRadius, colopt, mw, nItr, eim, We)
Nothing else - with the exception of comments - can proceed this line in the file.
As for the inputs to slic, besides your image im, you will have to determine what the number of super pixels, weighting factor, radius should be. The 100,5,1 are just examples.
When you run the above, what do you observe?
Image Analyst
2014-9-28
Alright, I did it for you. I just followed the explicit directions I gave you above - make them two separate mfiles. They are attached. Now I don't know what any of this does since I didn't dive into it, I just got it running. The files are attached and produce the image below. I really suggest that you look at this link http://www.mathworks.com/matlabcentral/answers/8026-best-way-s-to-master-matlab because having two m-files, one that is a function and one to call that function, is a really super basic skill that you will need to learn in order to advance in using MATLAB.
Please mark the Answer as Accepted. Since you have two posts on the same thing, this Answer is a duplicate of the one I just posted in your other duplicate post, so now it's in both places. Please mark both as Accepted.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/181443/image.jpeg)
更多回答(2 个)
Soham Patel
2018-1-22
编辑:Walter Roberson
2018-1-22
% SLIC Simple Linear Iterative Clustering SuperPixels
%
% Implementation of Achanta, Shaji, Smith, Lucchi, Fua and Susstrunk's
% SLIC Superpixels
%
% Usage: [l, Am, Sp, d] = slic(im, k, m, seRadius, colopt, mw)
%
% Arguments: im - Image to be segmented.
% k - Number of desired superpixels. Note that this is nominal
% the actual number of superpixels generated will generally
% be a bit larger, espiecially if parameter m is small.
% m - Weighting factor between colour and spatial
% differences. Values from about 5 to 40 are useful. Use a
% large value to enforce superpixels with more regular and
% smoother shapes. Try a value of 10 to start with.
% seRadius - Regions morphologically smaller than this are merged with
% adjacent regions. Try a value of 1 or 1.5. Use 0 to
% disable.
% colopt - String 'mean' or 'median' indicating how the cluster
% colour centre should be computed. Defaults to 'mean'
% mw - Optional median filtering window size. Image compression
% can result in noticeable artifacts in the a*b* components
% of the image. Median filtering can reduce this. mw can be
% a single value in which case the same median filtering is
% applied to each L* a* and b* components. Alternatively it
% can be a 2-vector where mw(1) specifies the median
% filtering window to be applied to L* and mw(2) is the
% median filtering window to be applied to a* and b*.
%
% Returns: l - Labeled image of superpixels. Labels range from 1 to k.
% Am - Adjacency matrix of segments. Am(i, j) indicates whether
% segments labeled i and j are connected/adjacent
% Sp - Superpixel attribute structure array with fields:
% L - Mean L* value
% a - Mean a* value
% b - Mean b* value
% r - Mean row value
% c - Mean column value
% stdL - Standard deviation of L*
% stda - Standard deviation of a*
% stdb - Standard deviation of b*
% N - Number of pixels
% edges - List of edge numbers that bound each
% superpixel. This field is allocated, but not set,
% by SLIC. Use SPEDGES for this.
% d - Distance image giving the distance each pixel is from its
% associated superpixel centre.
%
% It is suggested that use of this function is followed by SPDBSCAN to perform a
% DBSCAN clustering of superpixels. This results in a simple and fast
% segmentation of an image.
%
% Minor variations from the original algorithm as defined in Achanta et al's
% paper:
%
% - SuperPixel centres are initialised on a hexagonal grid rather than a square
% one. This results in a segmentation that will be nominally 6-connected
% which hopefully facilitates any subsequent post-processing that seeks to
% merge superpixels.
% - Initial cluster positions are not shifted to point of lowest gradient
% within a 3x3 neighbourhood because this will be rendered irrelevant the
% first time cluster centres are updated.
%
% Reference: R. Achanta, A. Shaji, K. Smith, A. Lucchi, P. Fua and
% S. Susstrunk. "SLIC Superpixels Compared to State-of-the-Art Superpixel
% Methods" PAMI. Vol 34 No 11. November 2012. pp 2274-2281.
%
% See also: SPDBSCAN, MCLEANUPREGIONS, REGIONADJACENCY, DRAWREGIONBOUNDARIES, RGB2LAB
% Copyright (c) 2013 Peter Kovesi
% Centre for Exploration Targeting
% School of Earth and Environment
% The University of Western Australia
% peter.kovesi at uwa edu au
%
% Permission is hereby granted, free of charge, to any person obtaining a copy
% of this software and associated documentation files (the "Software"), to deal
% in the Software without restriction, subject to the following conditions:
%
% The above copyright notice and this permission notice shall be included in
% all copies or substantial portions of the Software.
%
% The Software is provided "as is", without warranty of any kind.
% Feb 2013
% July 2013 Super pixel attributes returned as a structure array
% Note that most of the computation time is not in the clustering, but rather
% in the region cleanup process.
im = imread('D:\PG\Sem-3\Image_forgery\Dataset\CASIA1\Sp\Sp_D_CND_A_sec0056_sec0015_0282.jpg');
function [l, Am, Sp, d] = slic(im, k, m, seRadius, colopt, mw, nItr, eim, We)
if ~exist('colopt','var') || isempty(colopt), colopt = 'mean'; end
if ~exist('mw','var') || isempty(mw), mw = 0; end
if ~exist('nItr','var') || isempty(nItr), nItr = 10; end
if exist('eim', 'var'), USEDIST = 0; else, USEDIST = 1; end
MEANCENTRE = 1;
MEDIANCENTRE = 2;
if strcmp(colopt, 'mean')
centre = MEANCENTRE;
elseif strcmp(colopt, 'median')
centre = MEDIANCENTRE;
else
error('Invalid colour centre computation option');
end
[rows, cols, chan] = size(384*256);
if chan ~= 3
error('Image must be colour');
end
end
% Convert image to L*a*b* colourspace. This gives us a colourspace that is
% nominally perceptually uniform. This allows us to use the euclidean
% distance between colour coordinates to measure differences between
% colours. Note the image becomes double after conversion. We may want to
% go to signed shorts to save memory.
im = rgb2lab(im);
% Apply median filtering to colour components if mw has been supplied
% and/or non-zero
if mw
if length(mw) == 1
mw(2) = mw(1); % Use same filtering for L and chrominance
end
for n = 1:3
im(:,:,n) = medfilt2(im(:,:,n), [mw(1) mw(1)]);
end
end
% Nominal spacing between grid elements assuming hexagonal grid
S = sqrt(rows*cols / (k * sqrt(3)/2));
% Get nodes per row allowing a half column margin at one end that alternates
% from row to row
nodeCols = round(cols/S - 0.5);
% Given an integer number of nodes per row recompute S
S = cols/(nodeCols + 0.5);
% Get number of rows of nodes allowing 0.5 row margin top and bottom
nodeRows = round(rows/(sqrt(3)/2*S));
vSpacing = rows/nodeRows;
% Recompute k
k = nodeRows * nodeCols;
% Allocate memory and initialise clusters, labels and distances.
C = zeros(6,k); % Cluster centre data 1:3 is mean Lab value,
% 4:5 is row, col of centre, 6 is No of pixels
l = -ones(rows, cols); % Pixel labels.
d = inf(rows, cols); % Pixel distances from cluster centres.
% Initialise clusters on a hexagonal grid
kk = 1;
r = vSpacing/2;
for ri = 1:nodeRows
% Following code alternates the starting column for each row of grid
% points to obtain a hexagonal pattern. Note S and vSpacing are kept
% as doubles to prevent errors accumulating across the grid.
if mod(ri,2), c = S/2; else, c = S; end
for ci = 1:nodeCols
cc = round(c); rr = round(r);
C(1:5, kk) = [squeeze(im(rr,cc,:)); cc; rr];
c = c+S;
kk = kk+1;
end
r = r+vSpacing;
end
% Now perform the clustering. 10 iterations is suggested but I suspect n
% could be as small as 2 or even 1
S = round(S); % We need S to be an integer from now on
for n = 1:nItr
for kk = 1:k % for each cluster
% Get subimage around cluster
rmin = max(C(5,kk)-S, 1); rmax = min(C(5,kk)+S, rows);
cmin = max(C(4,kk)-S, 1); cmax = min(C(4,kk)+S, cols);
subim = im(rmin:rmax, cmin:cmax, :);
assert(numel(subim) > 0)
% Compute distances D between C(:,kk) and subimage
if USEDIST
D = dist(C(:, kk), subim, rmin, cmin, S, m);
else
D = dist2(C(:, kk), subim, rmin, cmin, S, m, eim, We);
end
% If any pixel distance from the cluster centre is less than its
% previous value update its distance and label
subd = d(rmin:rmax, cmin:cmax);
subl = l(rmin:rmax, cmin:cmax);
updateMask = D < subd;
subd(updateMask) = D(updateMask);
subl(updateMask) = kk;
d(rmin:rmax, cmin:cmax) = subd;
l(rmin:rmax, cmin:cmax) = subl;
end
% Update cluster centres with mean values
C(:) = 0;
for r = 1:rows
for c = 1:cols
tmp = [im(r,c,1); im(r,c,2); im(r,c,3); c; r; 1];
C(:, l(r,c)) = C(:, l(r,c)) + tmp;
end
end
% Divide by number of pixels in each superpixel to get mean values
for kk = 1:k
C(1:5,kk) = round(C(1:5,kk)/C(6,kk));
end
% Note the residual error, E, is not calculated because we are using a
% fixed number of iterations
end
% Cleanup small orphaned regions and 'spurs' on each region using
% morphological opening on each labeled region. The cleaned up regions are
% assigned to the nearest cluster. The regions are renumbered and the
% adjacency matrix regenerated. This is needed because the cleanup is
% likely to change the number of labeled regions.
% [l, Am] = mcleanupregions(l, seRadius);
Am = l;
% Recompute the final superpixel attributes and write information into
% the Sp struct array.
N = length(Am);
Sp = struct('L', cell(1,N), 'a', cell(1,N), 'b', cell(1,N), ...
'stdL', cell(1,N), 'stda', cell(1,N), 'stdb', cell(1,N), ...
'r', cell(1,N), 'c', cell(1,N), 'N', cell(1,N));
[X,Y] = meshgrid(1:cols, 1:rows);
L = im(:,:,1);
A = im(:,:,2);
B = im(:,:,3);
for n = 1:N
mask = l==n;
nm = sum(mask(:));
if centre == MEANCENTRE
Sp(n).L = sum(L(mask))/nm;
Sp(n).a = sum(A(mask))/nm;
Sp(n).b = sum(B(mask))/nm;
elseif centre == MEDIANCENTRE
Sp(n).L = median(L(mask));
Sp(n).a = median(A(mask));
Sp(n).b = median(B(mask));
end
Sp(n).r = sum(Y(mask))/nm;
Sp(n).c = sum(X(mask))/nm;
% Compute standard deviations of the colour components of each super
% pixel. This can be used by code seeking to merge superpixels into
% image segments. Note these are calculated relative to the mean colour
% component irrespective of the centre being calculated from the mean or
% median colour component values.
Sp(n).stdL = std(L(mask));
Sp(n).stda = std(A(mask));
Sp(n).stdb = std(B(mask));
Sp(n).N = nm; % Record number of pixels in superpixel too.
end
%-- dist -------------------------------------------
%
% Usage: D = dist(C, im, r1, c1, S, m)
%
% Arguments: C - Cluster being considered
% im - sub-image surrounding cluster centre
% r1, c1 - row and column of top left corner of sub image within the
% overall image.
% S - grid spacing
% m - weighting factor between colour and spatial differences.
%
% Returns: D - Distance image giving distance of every pixel in the
% subimage from the cluster centre
%
% Distance = sqrt( dc^2 + (ds/S)^2*m^2 )
% where:
% dc = sqrt(dl^2 + da^2 + db^2) % Colour distance
% ds = sqrt(dx^2 + dy^2) % Spatial distance
%
% m is a weighting factor representing the nominal maximum colour distance
% expected so that one can rank colour similarity relative to distance
% similarity. try m in the range [1-40] for L*a*b* space
%
% ?? Might be worth trying the Geometric Mean instead ??
% Distance = sqrt(dc * ds)
% but having a factor 'm' to play with is probably handy
% This code could be more efficient
function D = dist(C, im, r1, c1, S, m)
% Squared spatial distance
% ds is a fixed 'image' we should be able to exploit this
% and use a fixed meshgrid for much of the time somehow...
[rows, cols, chan] = size(im);
[x,y] = meshgrid(c1:(c1+cols-1), r1:(r1+rows-1));
x = x-C(4); % x and y dist from cluster centre
y = y-C(5);
ds2 = x.^2 + y.^2;
% Squared colour difference
for n = 1:3
im(:,:,n) = (im(:,:,n)-C(n)).^2;
end
dc2 = sum(im,3);
D = sqrt(dc2 + ds2/S^2*m^2);
end
%--- dist2 ------------------------------------------
%
% Usage: D = dist2(C, im, r1, c1, S, m, eim)
%
% Arguments: C - Cluster being considered
% im - sub-image surrounding cluster centre
% r1, c1 - row and column of top left corner of sub image within the
% overall image.
% S - grid spacing
% m - weighting factor between colour and spatial differences.
% eim - Edge strength sub-image corresponding to im
%
% Returns: D - Distance image giving distance of every pixel in the
% subimage from the cluster centre
%
% Distance = sqrt( dc^2 + (ds/S)^2*m^2 )
% where:
% dc = sqrt(dl^2 + da^2 + db^2) % Colour distance
% ds = sqrt(dx^2 + dy^2) % Spatial distance
%
% m is a weighting factor representing the nominal maximum colour distance
% expected so that one can rank colour similarity relative to distance
% similarity. try m in the range [1-40] for L*a*b* space
%
function D = dist2(C, im, r1, c1, S, m, eim, We)
% Squared spatial distance
% ds is a fixed 'image' we should be able to exploit this
% and use a fixed meshgrid for much of the time somehow...
[rows, cols, chan] = size(im);
[x,y] = meshgrid(c1:(c1+cols-1), r1:(r1+rows-1));
x = x-C(4);
y = y-C(5);
ds2 = x.^2 + y.^2;
% Squared colour difference
for n = 1:3
im(:,:,n) = (im(:,:,n)-C(n)).^2;
end
dc2 = sum(im,3);
% Combine colour and spatial distance measure
D = sqrt(dc2 + ds2/S^2*m^2);
% for every pixel in the subimage call improfile to the cluster centre
% and use the largest value as the 'edge distance'
rCentre = C(5)-r1; % Cluster centre coords relative to this sub-image
cCentre = C(4)-c1;
de = zeros(rows,cols);
for r = 1:rows
for c = 1:cols
v = improfile(eim,[c cCentre], [r rCentre]);
de(r,c) = max(v);
end
end
% Combine edge distance with weight, We with total Distance.
D = D + We * de;
end
Que:Error: File: slic.m Line: 382 Column: 5
Function definitions are not permitted in this context.
1 个评论
Walter Roberson
2018-1-22
You have a corrupted version of the code. You need to restore from https://www.mathworks.com/matlabcentral/answers/uploaded_files/18687/slic.m
Next time, do not delete any of the beginning of the code and add in a fixed imread(). Instead, write a few lines in a different file to do the imread() and to call this slic() routine passing in the image that was read.
Geoff Hayes
2014-9-26
aswathy - rather than pasting the slic.m code into your question, you could have just attached it using the paperclip button. That way, you would have had space to discuss the error and your inputs to the function.
So you've either added a line of code in front of the function definition as
im=imread('E:\project details wg\project\coding1\converted\ZX.jpg')
function [l, Am, Sp, d] = slic(im, k, m, seRadius, colopt, mw, nItr, eim, We)
which will lead to some sort of Function definitions are not permitted in this context error, or you have just tried to load the jpg and are passing it in as the first parameter to this function.
How are you calling this function?
What have you set the function input parameters of k, m, and seRadius (the remaining variables are optional) to be?
If I run the following
im = imread('some.jpg');
[l, Am, Sp, d] = slic(im,100,5,1);
I observe the following error
Undefined function 'rgb2lab' for input arguments of type 'uint8'.
This function can be found using your favourite web search tool. The version I found was written by the same author of the slic function (Peter Kovesi). However, running this function requires use of the makecform and applycform functions of the Image Processing Toolbox.
If you have this toolbox, you will also need to grab the author's function mcleanupregions.m (which makes use of other functions from the Image Processing Toolbox).
0 个评论
另请参阅
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!