Defining a function for a vector of values, while keeping two variables unknown

2021 10 21
4 个回答
回答已采纳
更新时间：2021 10 22
4 次查看（30 天）

0 个投票

I have created a function on matlab dependent on three variables, say:
f= @(x,y,z) f(x,y,z)
I have a vector of values for x, let's call it A. My goal is to estimate function:
So what I am looking for is a Matlab command which will allow me to calculate f(x,y,z) for each value of vector A, and then sum them together. Here are a few things I have tried that failed:
% Attempt #1: returns g as a number (0), rather than a function.
g = @(y,z) sum(f(A,y,z))
% Attempt #2: returns g as a number (0), rather than as a function.
g = @(y,z) cumsum(f(A,y,z))
% Attempt #3: doesn't recognize A as an input.
function g = g(y,z)
g = f(A,y,z)
end
I have checked and the issue lies in estimating f(A,y,Z), which immediately turns all values to 0. I know that a possible alternative to this is doing a manual sum of f(a_1,y,z) + f(a_2,y,z) etc, but there are 175 different numbers in vector A and coding this manually would take forever. Does anyone have any other ideas?

4 个评论
显示 2更早的评论 隐藏 2更早的评论

Jon
Jon 2021-10-21
could you also please provide the code that defines your function f(x,y,z)
Laura Freitas
Laura Freitas 2021-10-21
Of course. Function f(x,y,z) in my code is actually function PV(y,x,i). i is a binary choice variable and y is next period value of x (which are both discrete). Prob(y,x,i) is a probability matrix defined below. At first I thought perhaps having so many functions inside other functions might be the root of the problem, but I have coded them as one big function and the problem persists.
u_0 = @(y) -theta_11*0.001*y;
u_1 = @(y) -RC;
EV0 = @(y,j) 0;
V = @(y) log(exp(u_0(y)+beta*EV0(y,0))+exp(u_1(y)+beta*EV0(y,1)));
PV = @(y,x,i) Prob(y,x,i)*V(y);
%Define the probability matrix.
function P = Prob(y,x,i)
if i==0 & x== 442212 & y == 447354
P = 0.3621 + 0.0143;
elseif i==0 & x== 444783 & y== 447354
P = 0.5152 + 0.3621 + 0.0143;
elseif i==0 & x== 447354 & y== 447354
P = 1;
elseif i == 1 & y==0
P = 1;
elseif i==0 & ((y-x)/2571)==0
P = 0.1071;
elseif i==0 & ((y-x)/2571)==1
P = 0.5152;
elseif i==0 & ((y-x)/2571)==2
P = 0.3621;
elseif i==0 & ((y-x)/2571)==3
P = 0.0143;
else
P = 0;
end;
end
Walter Roberson
Walter Roberson 2021-10-21
elseif i==0 & ((y-x)/2571)==1
You are asking for the floating point calculation (y-x)/2571 to exactly equal an integer. That is risky because of floating point round-off. You would be better off rewriting it by multiplying it out,
elseif i==0 & (y-x)==2571*1

请先登录，再进行评论。

请先登录，再回答此问题。

 采纳的回答

Walter Roberson
Walter Roberson 2021-10-22
Ran in:

0 个投票

Ran in:
So I must achieve the function, EV(x,i), and then replace by the values of x and i
If you must achieve the function first, and then replace the placeholders later, then you need to use the symbolic toolbox and use piecewise()
The below is probably not correct. You say that you need to sum() but you did not define the dimension(s) you need to sum over.
theta_11 = 1
theta_11 = 1
beta = 2
beta = 2
RC = 8
RC = 8
u_0 = @(y) -theta_11*0.001*y;
u_1 = @(y) -RC;
EV0 = @(y,j) 0;
V = @(y) log(exp(u_0(y)+beta*EV0(y,0))+exp(u_1(y)+beta*EV0(y,1)));
PV = @(y,x,i) Prob(y,x,i).*V(y); % use .* since V is also now a vector
% make up some example values just to try code
i = 0
i = 0
x = 10
x = 10
y = [0, 3*2571 + x, 2*2571+x, 2571+x]
y = 1×4
0 7723 5152 2581
[yG, xG, iG] = ndgrid(y, x, i);
pv = arrayfun(PV, yG, xG, iG)
pv = 
sumPV = sum(pv, 1)
sumPV = 
function P = Prob(Y,X,I)
y = sym(Y); x = sym(X); i = sym(I);
P = piecewise( ...
i == 0 & x == 442212 & y == 447354, ...
0.3621 + 0.0143, ...
i == 0 & x == 444783 & y == 447354, ...
0.5152 + 0.3621 + 0.0143, ...
i == 0 & x == 447354 & y == 447354, ...
1, ...
i == 1 & y == 0, ...
1, ...
i == 0 & (y-x) == 0*2571, ...
0.1071, ...
i == 0 & (y-x) == 1*2571, ...
0.5152, ...
i == 0 & i == 0 & (y-x) == 2*2571, ...
0.3621, ...
i == 0 & i == 0 & (y-x) == 3*2571, ...
0.0143, ...
symtrue, ...
0 );
end

2 个评论
显示 无 隐藏 无

Walter Roberson
Walter Roberson 2021-10-22
Note: I don't say that this is necessarily the best way -- just that this method matches the requirements you defined about defining the function first and then substituting in values.

请先登录，再进行评论。

更多回答（3 个）

Sulaymon Eshkabilov
Sulaymon Eshkabilov 2021-10-21
编辑：Sulaymon Eshkabilov 2021-10-21
Ran in:

0 个投票

Ran in:
Supposedly, this is what you are trying to achieve:
syms y z
A = magic(3);
F = @(A, y, z) cumsum(A+y+z);
FF = (F(A, y,z))
FF = 

1 个评论
显示 -1更早的评论 隐藏 -1更早的评论

Laura Freitas
Laura Freitas 2021-10-21
Thank you for the answer! However, this doesn't exactly fit my goal. I have a 1x175 vector:
And I already have a function defined: . I want to evaluate this function at each value of the vector for x. Basically I want to get vector:
I then want to sum up all values of this vector to get function:
.
Sorry if this was not clear the first time around!

请先登录，再进行评论。

Sulaymon Eshkabilov
Sulaymon Eshkabilov 2021-10-21
编辑：Sulaymon Eshkabilov 2021-10-21

0 个投票

% Here is the complete solution
syms y z
A =1:5;
F = @(A, y, z) sum(A+y+z);
FF = (F(A, y,z))

1 个评论
显示 -1更早的评论 隐藏 -1更早的评论

Laura Freitas
Laura Freitas 2021-10-21
Thank you for trying again! However please note that is not a linear function, and so this approach does not work for my purposes. I tried to adapt your approach in my code in the following way:
g = @(A,y,z) sum(f(A,y,z))
And it returned a value of zero. Please note my comment above detailing the specifics of the code!

请先登录，再进行评论。

Jon
Jon 2021-10-22

0 个投票

One way to do what I think you want is to have the inner function, in your case PV(y,x,i) accept a vector argument for y and return a vector of values, pv. Then you can easily sum up the elements of pv using MATLAB's sum function.
Here is an attempt to illustrate this where I have appropriately modified your code snippet.
By the way your function EV0 seems to do nothing as it will always return zero, so then in your definition of your function V(y) the terms beta*EV0(y,0) are always zero. Doesn't seem to make much sense, but the main point is showing you how to have the function P accept and return a vector argument, and summing up the elements
% make up some example values just to try code
theta_11 = 1
beta = 2
RC = 8
u_0 = @(y) -theta_11*0.001*y;
u_1 = @(y) -RC;
EV0 = @(y,j) 0;
V = @(y) log(exp(u_0(y)+beta*EV0(y,0))+exp(u_1(y)+beta*EV0(y,1)));
PV = @(y,x,i) Prob(y,x,i).*V(y); % use .* since V is also now a vector
% make up some example values just to try code
i = 0
x = 10
y = [0, 3*2571 + x, 2*2571+x, 2571+x]
pv = PV(y,x,i)
sumPV = sum(pv)
% Define the probability matrix, to accept vector y
function P = Prob(y,x,i)
% preallocate output vector
P = zeros(size(y));
for k = 1:numel(P)
if i==0 && x== 442212 && y(k) == 447354
P(k) = 0.3621 + 0.0143;
elseif i==0 && x== 444783 && y(k)== 447354
P(k) = 0.5152 + 0.3621 + 0.0143;
elseif i==0 && x== 447354 && y(k)== 447354
P(k) = 1;
elseif i == 1 && y(k)==0
P(k) = 1;
elseif i==0 && (y(k)-x)==0*2571
P(k) = 0.1071;
elseif i==0 && (y(k)-x)==1*2571
P(k) = 0.5152;
elseif i==0 && i==0 && (y(k)-x)==2*2571
P(k) = 0.3621;
elseif i==0 && i==0 &&(y(k)-x)==3*2571
P(k) = 0.0143;
else
P(k) = 0;
end
end
end

5 个评论
显示 3更早的评论 隐藏 3更早的评论

Laura Freitas
Laura Freitas 2021-10-22
Thank you for your answer! Just a couple of points:
  • EV0 = 0 for all y and j because this is the first part of a value iteration algorithm, where EV0 is my initial guess of EV(x,i). So while the formulation for the initial value EV0 may seem trivial, it is not, as this will come into play when defining the loop.
  • x and i are meant to remain unknown, so unfortunately this doesn't fully address my question.
Jon
Jon 2021-10-22
I don't know what you mean by saying x and i are meant to remain unknown. If you have a function Prob(y,x,i) certainly you must know the values of y, x, and i to evaluate it.
Laura Freitas
Laura Freitas 2021-10-22
I do, but not in the first stage. Again, this is a value iteration process. So I must achieve the function, EV(x,i), and then replace by the values of x and i. x and i are themselves vectors. x is a 1x175 vector, and i a 1x2.
Jon
Jon 2021-10-22
I'm sorry, I can't really follow the details of what you are trying to do here, but did my answer solve your problem?
Laura Freitas
Laura Freitas 2021-10-22
Thank you very much for trying, but unfortunately no. Then again, I think my method is probably not the best to go about this problem.

请先登录，再进行评论。

类别

在 帮助中心 和 File Exchange 中查找有关 Programming 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by