Support for TI C2000 Packages installation in Embedded Coder Matlab 2014b with CCSv6.0.1 and issues faced
10 次查看(过去 30 天)
显示 更早的评论
Puneeth Kumar Srikanta Murthy
2014-10-30
编辑: Sai Surya Kumar Dontabhaktuni
2017-8-2
Hello,
I am trying to install the support packages for the TI C2000 processors. I have Matlab 2014b with Embedded Coder and Code Composer Studio(CCS) V6.0.1 . I am getting the following messages when I try to install the support packages using the corresponding links as support.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/145895/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/145896/image.png)
Please let me know what the issue is. I have re installed the whole CCS package all over again just to ensure that all the necessary packages are installed. But even then I am facing the same issue as described above. Also, does Matlab 2014b support CCSv6. Kindly let me know if I need to install my Embedded Coder on a different version of matlab or I should be using a different version of CCS. Also, it would be great if I can get which versions of Matlab are compatible with the corresponding versions of CCS. That would be great.
Thank you very much in advance! Puneeth
1 个评论
Fadoul Souleyman
2017-7-18
Hi, I had the same probleme and I solved it by the following details:
Command to install C2000 package Embedded Library in Matlab Tape the command « supportPackageInstaller » in the matlab windoe and then follow the steps: More details in this link:
采纳的回答
更多回答(5 个)
Tuyen
2014-11-5
I have the same problem!
5 个评论
NguyenTung
2016-3-7
编辑:Walter Roberson
2016-3-7
Hello Puneeth,
I using matlab 2014a and ccsv5 for F28335 Experience Kit.
Building on Matlab maybe good, But it does not detect Kit. Can you help me, please. I send to you Diagnostice below:
### Generated code for 'test_io_31' is up to date because no structural, parameter or code replacement library changes were found.
"### Invoking postbuild tool "Download" ..."
C:/ti/ccsv5/ccs_base/SCRIPT~1/bin/dss.bat C:\PROGRA~1\MATLAB\R2014a/toolbox/idelink/EXTENS~1/ticcs/ccsdemos/RUNPRO~1.JS C:\MATLAB\SUPPOR~1\R2014a\tic2000/CCS_CO~1/F28335~1.CCX ../test_io_31.out
*** User inputs:
Target Configuration: C:\MATLAB\SUPPOR~1\R2014a\tic2000/CCS_CO~1/F28335~1.CCX
Program Name: ../test_io_31.out
Board Name: unspecified (connect to first board)
CPU Name: unspecified (connect to first CPU)
*** Starting debug session...
*** Debug Session Name: Texas Instruments XDS100v1 USB Emulator_0/C28xx
*** Board Name: Texas Instruments XDS100v1 USB Emulator_0
*** CPU Name: C28xx
*** Connecting to target...
SEVERE: C28xx: Error connecting to the target: (Error -151 @ 0x0) One of the FTDI driver functions used during the connect returned bad status or an error. The cause may one or more of: invalid emulator serial number, blank emulator EEPROM, missing FTDI drivers, faulty USB cable. Use the xds100serial command-line utility in the 'common/uscif' folder to verify the emulator can be located. (Emulation package 5.1.232.0)
SEVERE: emulation failure occurred
SEVERE: Error connecting to the target: emulation failure occurred
SEVERE: Cannot perform operation, target is not connected.
SEVERE: Error reseting target: Cannot perform operation, target is not connected.
org.mozilla.javascript.WrappedException: Wrapped com.ti.ccstudio.scripting.environment.ScriptingException: Error reseting target: Cannot perform operation, target is not connected. (C:\PROGRA~1\MATLAB\R2014a/toolbox/idelink/EXTENS~1/ticcs/ccsdemos/RUNPRO~1.JS#93)
at org.mozilla.javascript.Context.throwAsScriptRuntimeEx(Context.java:1693)
at org.mozilla.javascript.MemberBox.invoke(MemberBox.java:160)
at org.mozilla.javascript.NativeJavaMethod.call(NativeJavaMethod.java:204)
at org.mozilla.javascript.optimizer.OptRuntime.callProp0(OptRuntime.java:119)
at org.mozilla.javascript.gen.c1._c0(C:\PROGRA~1\MATLAB\R2014a/toolbox/idelink/EXTENS~1/ticcs/ccsdemos/RUNPRO~1.JS:93)
at org.mozilla.javascript.gen.c1.call(C:\PROGRA~1\MATLAB\R2014a/toolbox/idelink/EXTENS~1/ticcs/ccsdemos/RUNPRO~1.JS)
at org.mozilla.javascript.ContextFactory.doTopCall(ContextFactory.java:340)
at org.mozilla.javascript.ScriptRuntime.doTopCall(ScriptRuntime.java:2758)
at org.mozilla.javascript.gen.c1.call(C:\PROGRA~1\MATLAB\R2014a/toolbox/idelink/EXTENS~1/ticcs/ccsdemos/RUNPRO~1.JS)
at org.mozilla.javascript.gen.c1.exec(C:\PROGRA~1\MATLAB\R2014a/toolbox/idelink/EXTENS~1/ticcs/ccsdemos/RUNPRO~1.JS)
at org.mozilla.javascript.tools.shell.Main.evaluateScript(Main.java:503)
at org.mozilla.javascript.tools.shell.Main.processFileSecure(Main.java:425)
at org.mozilla.javascript.tools.shell.Main.processFile(Main.java:391)
at org.mozilla.javascript.tools.shell.Main.processSource(Main.java:382)
at org.mozilla.javascript.tools.shell.Main.processFiles(Main.java:179)
at org.mozilla.javascript.tools.shell.Main$IProxy.run(Main.java:100)
at org.mozilla.javascript.Context.call(Context.java:528)
at org.mozilla.javascript.ContextFactory.call(ContextFactory.java:450)
at org.mozilla.javascript.tools.shell.Main.exec(Main.java:162)
at com.ti.ccstudio.apps.internal.scripting.RunScript$1.run(RunScript.java:88)
Caused by: com.ti.ccstudio.scripting.environment.ScriptingException: Error reseting target: Cannot perform operation, target is not connected.
at com.ti.debug.engine.scripting.Target.reset(Target.java:620)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.mozilla.javascript.MemberBox.invoke(MemberBox.java:145)
... 18 more
"### Done invoking postbuild tool."
### Successful completion of build procedure for model: test_io_31
Best Regard.
Thanks a lot.
Tung.
Walter Roberson
2016-3-7
You are failing to connect. The key line there is
"SEVERE: C28xx: Error connecting to the target: (Error -151 @ 0x0) One of the FTDI driver functions used during the connect returned bad status or an error. The cause may one or more of: invalid emulator serial number, blank emulator EEPROM, missing FTDI drivers, faulty USB cable. Use the xds100serial command-line utility in the 'common/uscif' folder to verify the emulator can be located. (Emulation package 5.1.232.0) "
Zhirong Liang
2014-11-24
Could you tell me, how did you interact with TI C2000 F2835 with Matlab 2014b?
I'm using Matlab 2014b and TI C6000(actually C6748/OMAP-L138). I have also tried xmakefilesetup like you. But it didn't work any more with 2014b.
Maybe you could explain me, how to find any useful help.
Thank you very much!
Zhirong
2 个评论
Jay Patel
2015-6-30
I'm using Matlab 2014b and TI C6000(actually C6748/OMAP-L138). Could you tell me, how did you interact with TI C2000 F2835 with Matlab 2014b?
Can you please explain me. It might be helpful.
Puneeth Kumar Srikanta Murthy
2014-12-4
1 个评论
Zhirong Liang
2015-2-13
编辑:Walter Roberson
2016-3-7
Hello, Puneeth! Thanks for your useful help!
The problem for the xmakefilesetup is solved. But another one comes.
At first I tip checkEnvSetup at Matlab command window and it shows:
>> checkEnvSetup('ccsv5', 'omapl138evm')
1. Checking CCSv5 (Code Composer Studio) version
Required version: 5.0 or later
Required for : Code Generation
Your Version : 5.5.0
### Setting environment variable "TI_DIR" to "C:\ti\ccsv5"
2. Checking C6000 CSL (TMS320C6000 Chip Support Library) version
Required version: 2.31.00.10 or later
Required for : Code generation
Your Version : 2.31.00.15
### Setting environment variable "CSL_C6000_INSTALLDIR" to "C:\ti\C6xCSL"
### Setting environment variable "CSL_C6000_INSTALLDIR" to "C:\ti\C6xCSL"
3. Checking XDC Tools (eXpress DSP Components) version
Required version: 3.16.02.32 or later
Required for : Code generation
Your Version : 3.24.03.33
4. Checking CGT (Code Generation Tools) version
Required version: 6.1.18 to 7.3.1
Required for : Code generation
Your Version : 6.1.23
### Setting environment variable "C6000_CGT_INSTALLDIR" to "C:\ti\CGT_6_1_23"
### Setting environment variable "C6000_CGT_INSTALLDIR" to "C:\ti\CGT_6_1_23"
5. Checking DSP/BIOS (Real Time Operating System) version
Required version: 5.33.05 to 5.41.11.38
Required for : Code generation
Your Version : 5.42.01.09
### Setting environment variable "CCSV5_DSPBIOS_INSTALLDIR" to "C:\ti\bios_5_42_01_09"
### Setting environment variable "CCSV5_DSPBIOS_INSTALLDIR" to "C:\ti\bios_5_42_01_09"
The version found for "DSP/BIOS" differs from the one used for our software validation. Use it at your own risk.
6. Checking Texas Instruments IMGLIB (C64x+ Image Library) version
Required version: 2.0.1 or later
Required for : CRL block replacement
Your Version : 2.1.0.0
### Setting environment variable "C64XP_IMGLIB_INSTALLDIR" to "C:\ti\c64plus-imglib_2_02_00_00"
7. Checking NDK (NDK 2.00) version
Required version: 2.00.00 or later
Required for : External mode and Ethernet blocks
Your Version : NOT FOUND
The required version of NDK is not found in C:\ti\ndk_2_20_00_19
Following environment variable(s) required for code generation could not be set:
### "NDK_EVMC6748_INSTALLDIR"
8. Checking C674x DSP/BIOS PSP Drivers (BIOS PSP Release version 01.30.00.05) version
Required version: 1.30.00.05
Required for : Code generation / device drivers
Your Version : 1.30.01
### Setting environment variable "PSP_EVMC6748_INSTALLDIR" to "C:\ti\pspdrivers_01_30_01"
The version found for "C674x DSP/BIOS PSP Drivers" differs from the one used for our software validation. Use it at your own risk.
9. Checking EDMA3 Low Level Driver (EDMA3 LLD 01.10) version
Required version: 1.10.00 or later
Required for : Device drivers
Your Version : 01.11.03
### Setting environment variable "EDMA3LLD_BIOS5_INSTALLDIR" to "C:\ti\edma3_lld_01_11_03_01"
10. Checking OMAP-L138/C6747EVM BSL (OMAP-L138 / TMS320C6748 / AM1808 SOM-M1 Gel, CCS Setup, & BSL Files (CCS v4.2.4)) version
Required version: 2.0.0 or later
Required for : Device drivers
Your Version : 2.3.2
### Setting environment variable "BSL_EVMC6748_INSTALLDIR" to "C:\ti\CCSv4-2-4_with_SOM-M1_BSL_WS"
;-------------------------------------------------------------------------------------------
And then I do the XMakefile User Configuration at Matlab Command Window again just like a video names Simulink code generation from MATLAB for TI C2000 processors- Hello World using CCS v4/v5 on youtube :
Template: gmake
Configuration: ticcs_c6000_ccsv5_clone
User Templates: C:\Users\bisp\Documents\MATLAB\CodeGeneration02\
User Configurations: C:\Users\bisp\Documents\MATLAB\CodeGeneration02\
Under Make Utility:
Make utility: C:\Program Files\MATLAB\R2014b\bin\win64\gmake
Arguments:-f "[|||MW_XMK_GENERATED_FILE_NAME[R]|||]" [|||MW_XMK_ACTIVE_BUILD_ACTION_REF|||]
Under Compiler:
Compiler: C:/ti/ccsv5/tools/compiler/c6000_7.4.8/bin/cl6x
Arguments: -I"C:/ti/ccsv5/tools/compiler/c6000_7.4.8/include" -I"C:/ti/OMAPL138_CSL/include" -fr"[|||MW_XMK_DERIVED_PATH_REF|||]"
Under Linker:
Linker: C:/ti/ccsv5/tools/compiler/c6000_7.4.8/bin/cl6x
Arguments:-o [|||MW_XMK_GENERATED_TARGET_REF|||] -I"C:/ti/bios_5_42_01_09/packages/ti/pmi/lib/pmi.a674" -I"C:/ti/bios_5_42_01_09/packages/ti/pmi/lib/pmi_ctl_null.a674" -I"C:/ti/bios_5_42_01_09/packages/ti/bios/lib/pwrm.a674" -I"C:/ti/bios_5_42_01_09/packages/ti/pscl/lib/pscl.a674" -I"C:/ti/bios_5_42_01_09/packages/ti/pscl/lib/pscl_cfg_null.a674"
Under Archiver:
Archiver: C:/ti/ccsv5/tools/compiler/c6000_7.4.8/bin/ar6x
Arguments: -r [|||MW_XMK_GENERATED_TARGET_REF|||]
;-----------------------------------------------------------------------------------------
After that it's the turn for the options of Model Configeration Parameters:
Target selection
System target file: idelink_ert.tlc,
Language: C.
;---------I can only select idelink_ert.tlc here, otherwise the Coder Target wouldn't be shown for choosing the suitable board. For example: when I select ert.tlc, the Coder Target is not to see. But at the Target hardware man can choose either NONE or GET MORE.... For Get More there will be only a few support package for update to install. It makes non sense for the final mission.
When I use the idelink_ert.tlc as System target file, the Coder Target is there on the left side under Code Generation. For Tool Chain Automation and Target Hardware Resources I have done these options:
Coder Target
Tool Chain Automation
Bild format: Makefile,
Bild action: Bild_and_execute,
Overrun notification: None.
Target Hardware Resources
IDE/Tool Chain: Texas Instruments CCS v5(makefile generation only),
Board: OMAP-L138/C6748 EVM,
Processor: OMAP-L138,
CPU Clock: 300 MHz.
;-----------------------------------------------------------------------------------------------
At the end I build a simple Model (just with Audio of Multimedia File, C6748EVM DAC, C6748EVM ADC, Audio Device and C6000 Reset Block ), I get the following error:
### Creating makefile: C:\Users\bisp\Documents\MATLAB\c6748evmwithreset_ticcs\c6748evmwithreset.mk ### Makefile creation done. ### Building makefile...
The call to idelink_ert_make_rtw_hook, during the exit hook generated the following error: Error while building the project.
The build process will terminate as a result.
Error while building the project.
The build failed with the following message: "C:/ti/ccsv5/tools/compiler/c6000_7.4.8/bin/cl6x" -I"C:/Program Files/MATLAB/R2014b/toolbox/idelink/extensions/ticcs/inc" -I"C:/Program Files/MATLAB/R2014b/toolbox/shared/dspblks/extern/include" -I"C:/Program Files/MATLAB/R2014b/extern/include/multimedia" -I"C:/Program Files/MATLAB/R2014b/toolbox/shared/dsp/vision/matlab/include" -I"C:/Users/bisp/Documents/MATLAB/c6748evmwithreset_ticcs" -I"C:/Users/bisp/Documents/MATLAB" -I"C:/Program Files/MATLAB/R2014b/extern/include" -I"C:/Program Files/MATLAB/R2014b/simulink/include" -I"C:/Program Files/MATLAB/R2014b/rtw/c/src" -I"C:/Program Files/MATLAB/R2014b/rtw/c/src/ext_mode/common" -I"C:/Program Files/MATLAB/R2014b/rtw/c/ert" -I"C:/Program Files/MATLAB/R2014b/toolbox/dsp/include" -I"C:/Program Files/MATLAB/R2014b/toolbox/dsp/extern/src/export/include/src" -I"C:/Program Files/MATLAB/R2014b/toolbox/dsp/extern/src/export/include" -I"C:/Program Files/MATLAB/R2014b/toolbox/target/extensions/processor/tic6000/blks/lct/include" -I"C:/ti/pspdrivers_01_30_01/packages" -I"C:/ti/pspdrivers_01_30_01/packages/ti/pspiom/cslr" -I"C:/ti/pspdrivers_01_30_01/packages/ti/pspiom/platforms/evm6748" -I"C:/ti/pspdrivers_01_30_01/packages/ti/pspiom/platforms/evm6748/audio" -I"C:/ti/pspdrivers_01_30_01/packages/ti/pspiom/mcasp" -I"C:/ti/pspdrivers_01_30_01/packages/ti/pspiom/i2c" -I"C:/ti/pspdrivers_01_30_01/packages/ti/pspiom/platforms/codec" -I"C:/ti/pspdrivers_01_30_01/packages/ti/pspiom/psc" -I"C:/ti/edma3_lld_01_11_03_01/packages" -I"C:/ti/edma3_lld_01_11_03_01/packages/ti/sdo/edma3/drv" -D"CHIP_OMAPL138" -D"__TICCSC__" -D"RT" -D"USE_RTMODEL" -mv6400+ -D"MODEL=c6748evmwithreset" -D"NUMST=3" -D"NCSTATES=0" -D"HAVESTDIO=" -D"ONESTEPFCN=1" -D"TERMFCN=1" -D"MAT_FILE=0" -D"MULTI_INSTANCE_CODE=0" -D"INTEGER_CODE=0" -D"MT=1" -D"CLASSIC_INTERFACE=0" -D"ALLOCATIONFCN=0" -D"TID01EQ=0" -I"C:/ti/ccsv5/tools/compiler/c6000_7.4.8/include" -I"C:/ti/OMAPL138_CSL/include" -fr"./derived/" ./HostLib_Audio.c ./HostLib_MMFile.c ./HostLib_Multimedia.c ./HostLib_rtw.c ./c6748evm_aic31.c ./c6748evm_i2c.c ./MW_c6xxx_csl.c ./c6748evmwithreset.c ./c6748evmwithreset_data.c ./c6748evmwithreset_main.c [HostLib_Audio.c] "C:/Program Files/MATLAB/R2014b/toolbox/shared/dspblks/extern/include/HostLib_rtw.h", line 15: fatal error: could not open source file "dlfcn.h" 1 fatal error detected in the compilation of "./HostLib_Audio.c". Compilation terminated. >> Compilation failure gmake: *** [derived/HostLib_Audio.obj] Error 1
Component: Simulink | Category: Block error
;----------------------------------------------------------------------------------------------------------------------------
As you see, there is no .out file finished at all because of the error. But a number of c- and header files are produced automatically. Can you help me a bit more or give me any useful tipps?
Thank you very much!
Zhirong
Alfredo GD
2015-9-1
hi, did you use the embedded coder library on simulink???? or do i2c communication? i need help, please write to me alfregomezdelga@hotmail.com
0 个评论
Sai Surya Kumar Dontabhaktuni
2017-8-2
编辑:Sai Surya Kumar Dontabhaktuni
2017-8-2
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/177645/image.png)
I am getting these error. Is there any solutions
0 个评论
另请参阅
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!