Raspberry Pi "LIKE" board

Question

Zack Bayhan 2014-11-17

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/163003-raspberry-pi-like-board

评论： Star Strider 2014-11-17

Good evening everyone, had a quick question for you. I'm looking at a Raspberry Pi Like board and was wondering if the matlab raspberry pi add on pack would work with it? Here is a link to the one i'm looking at if that is helpful. Thanks as always for the help and look forward to your insight into this matter. Zack

http://www.newegg.com/Product/Product.aspx?Item=N82E16813455002&cm_re=raspberry_pi-_-13-455-002-_-Product

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Star Strider 2014-11-17

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/163003-raspberry-pi-like-board#answer_159187

I searched the SolidRun site for ‘MATLAB’ and ‘Simulink’ and found nothing. Contact them first and ask.

2 个评论
显示无隐藏无

Zack Bayhan 2014-11-17

Thanks again, I will contact them directly to see what they say. I guess I was a little confused about "like" I kept reading on the reviews I found on the internet.

Star Strider 2014-11-17

My pleasure!

It’s best to check to be sure you don’t end up with a $75 doorstop! You might also want to see if you can start a MATLAB thread on their Forum site. If the SolidRun modules need ‘tweaks’ to make them compatible with Raspberry Pi Support Packages, check back here frequently. You will quite likely be the expert on SolidRun interfacing here.

请先登录，再进行评论。